Opens in a new tab

IS62WV51216BLL-55BLI

8Mbit async SRAM, 512Kx16, 2.5-3.6V, 55ns, ultra-low power, 48-mini BGA, Industrial

3838

Effective Inventory

Image for reference only

Manufacturer Part:

IS62WV51216BLL-55BLI

Package:

48-Mini BGA (7.2 x 8.7 x 0.9 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The IS62WV51216BLL-55BLI is a ISSI product designed for electronic applications. It features compact design with reliable performance characteristics suitable for various industrial and consumer applications.

Key Specifications

Memory Type Asynchronous SRAM
Density 8Mbit (1MB)
Organization 512K x 16
Access Time 55 ns
Interface Parallel (Asynchronous)
Supply Voltage 2.5V to 3.6V
Operating Power 36 mW (Typ)
CMOS Standby Current 12 uW (Typ)
Address Bus Width 19 bits (A0-A18)
Data Bus Width 16 bits (I/O0-I/O15)
Byte Control LB (lower), UB (upper)
Chip Enables CS1 (active-low), CS2 (active-high)
Fully Static Operation No clock or refresh required
Operating Temperature -40 C to +85 C (Industrial)
Package 48-Mini BGA (7.2 x 8.7 x 0.9 mm)
Also Available 44-TSOP Type II

Features

8Mbit ultra-low power CMOS static RAM; 512K x 16 organization; 55ns access time; Wide voltage range: 2.5V to 3.6V; Ultra-low CMOS standby power (12 uW typical); No clock or refresh required (fully static); TTL-compatible interface levels; Three-state outputs; Upper and lower byte control (UB, LB); Dual chip enable (CS1, CS2) for easy expansion; Industrial temperature grade (-40C to +85C); 48-Mini BGA and 44-TSOP II package options; Lead-free (matte Sn) available

Applications

Battery-backed memory systems; Embedded processor cache; Industrial control systems; Data logging and buffering; Portable and handheld devices; Communication equipment; Hard disk drive buffer; Automotive body electronics

Product Introduction: IS62WV51216BLL-55BLI Product Introduction

The IS62WV51216BLL-55BLI from ISSI is an 8Mbit ultra-low power CMOS static RAM organized as 512K words by 16 bits, fabricated using ISSI’s high-performance CMOS technology. With a 55ns access time and supply voltage range of 2.5V to 3.6V, this device is optimized for battery-powered and low-power embedded applications where data retention with minimal power consumption is critical. The fully static design requires no clock or refresh, simplifying memory controller design and ensuring data integrity without periodic refresh cycles. The ultra-low CMOS standby power of just 12 uW typical makes this SRAM ideal for always-on applications where the memory must retain data during long periods of system idle. The BLL designation indicates the 2.5-3.6V voltage range (B series), 55ns speed grade (55), BGA package (B), and industrial temperature grade (I). Dual chip enable inputs (CS1 active-low and CS2 active-high) simplify memory expansion, while upper byte (UB) and lower byte (LB) control signals enable byte-wide read and write operations on the 16-bit data bus.

Working Principle: IS62WV51216BLL-55BLI Working Principle

The IS62WV51216BLL-55BLI operates as a fully static asynchronous SRAM where each memory cell consists of a 6-transistor CMOS flip-flop that retains its stored bit as long as power is applied, without requiring periodic refresh cycles. Address inputs (A0-A18) directly decode to select one of 512K x 16 bit locations through row and column decoders. When CS1 is low and CS2 is high, the device is selected and responds to control inputs. A read operation occurs when WE is high, OE is low, and the appropriate byte enable (LB for I/O0-I/O7, UB for I/O8-I/O15) is low; the data at the selected address appears on the I/O pins after the 55ns access time. A write operation occurs when WE is low; data on the I/O pins is written to the selected address with the byte enables controlling which byte is written. When deselected (CS1 high or CS2 low), the device enters a low-power standby mode where CMOS input levels reduce power consumption to just 12 uW typical. The three-state outputs go to high impedance when the device is deselected, when OE is high, or when both byte enables are high, allowing the I/O bus to be shared with other devices.

Pin Description: IS62WV51216BLL-55BLI Pin Definition and Functions
Pin Name Type Function
A0-A18 Address Inputs Input 19-bit address selects one of 512K x 16 memory locations
I/O0-I/O7 Lower Byte Data I/O Lower byte bidirectional data bus (controlled by LB)
I/O8-I/O15 Upper Byte Data I/O Upper byte bidirectional data bus (controlled by UB)
CS1 Chip Enable 1 Input Active-low chip select; must be low to select device
CS2 Chip Enable 2 Input Active-high chip select; must be high to select device
OE Output Enable Input Active-low output enable; gates data onto I/O during reads
WE Write Enable Input Active-low write enable; controls writing and reading of memory
LB Lower Byte Control Input Active-low lower byte enable; controls I/O0-I/O7
UB Upper Byte Control Input Active-low upper byte enable; controls I/O8-I/O15
Application Scenarios: In which products and applications is IS62WV51216BLL-55BLI used
  • Battery-Backed Memory: Retains critical data in battery-powered systems with 12 uW standby power enabling months of data retention on a coin cell.
  • Embedded Processor Cache: Provides 1MB of fast 55ns SRAM cache for embedded processors without requiring refresh logic or clock synchronization.
  • Industrial Data Logging: Buffers sensor measurements and event records in industrial equipment with fully static operation ensuring data integrity during power interruptions.
  • Communication Buffers: Stores packet data and routing tables in networking equipment with byte-level control enabling efficient header and payload manipulation.
Alternative Models: What chips are recommended as replacements for IS62WV51216BLL-55BLI
Manufacturer Part Number Package Density Notes
ISSI IS62WV51216BLL-55TLI 44-TSOP II 8Mbit TSOP package variant
ISSI IS62WV51216ALL-55BLI 48-Mini BGA 8Mbit 1.65-2.2V version
Cypress CY62157EV30LL-55ZSXI 48-BGA 8Mbit Pin-compatible alternative
Microchip AT68166FT-55BUI 48-BGA 8Mbit Radiation-tolerant alternative

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1