Opens in a new tab

ISO7131CCDBQR

4-CH Digital Isolator, 5000Vrms, 150Mbps, 3+1, SSOP-16

4567

Effective Inventory

Image for reference only

Manufacturer Part:

ISO7131CCDBQR

Package:

SSOP-16 (5.8 x 7.5 x 1.75 mm, 0.65mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The ISO7131CCDBQR from Texas Instruments is a quad-channel digital isolator with 5000Vrms isolation, 3/1 channel direction, and 150Mbps data rate in an SSOP-16 package.

Key Specifications

Type Quad-Channel Digital Isolator
Channels 4 (3 forward + 1 reverse)
Isolation Rating 5000 Vrms (1 minute)
Working Voltage 1200 Vpeak (reinforced)
Data Rate 0 to 150 Mbps
Propagation Delay 10 ns (typical)
Pulse Width Distortion 2 ns (max)
Supply Voltage 2.875V to 5.5V (each side)
Current per Channel 1.6 mA (typical @ 5V, 1Mbps)
Package SSOP-16 (5.8 x 7.5 mm)
Operating Temperature -40C to +125C (C grade)
Safety Approvals UL1577, VDE, CSA, TUV, CQC

Features

  • 5000Vrms reinforced isolation
  • 150 Mbps data rate per channel
  • 3 forward + 1 reverse channel configuration
  • 10 ns typical propagation delay
  • 2 ns pulse width distortion
  • Multiple safety approvals (UL, VDE, CSA, TUV, CQC)

Applications

  • Industrial communication isolation
  • SPI bus isolation
  • Motor drive signal isolation
  • Medical equipment isolation
Product Introduction: ISO7131CCDBQR Product Introduction

The ISO7131CCDBQR from Texas Instruments is a quad-channel digital isolator with 5000Vrms reinforced isolation rating in an SSOP-16 package. The 3 forward + 1 reverse channel configuration is ideal for isolating SPI buses (SCLK, MOSI, CS forward; MISO reverse) with a single device. The 150 Mbps data rate supports high-speed digital communication including SPI clock rates up to 75 MHz. The 10 ns typical propagation delay and 2 ns pulse width distortion maintain signal integrity for timing-sensitive protocols. The 5000 Vrms isolation rating and 1200 Vpeak working voltage meet reinforced isolation requirements for industrial and medical equipment. The C grade specifies -40C to +125C operating temperature. Multiple safety approvals (UL1577, VDE 0884-10, CSA, TUV, CQC) simplify system certification. The device uses TI’s silicon dioxide (SiO2) isolation barrier for long-term reliability.

Working Principle: ISO7131CCDBQR Working Principle

The ISO7131CCDBQR uses TI’s capacitive isolation technology with an on-off keying (OOK) modulation scheme. Each channel consists of a transmitter on one side of the isolation barrier and a receiver on the other. The transmitter modulates the input digital signal onto a high-frequency carrier (approximately 600 MHz) using OOK: when the input is HIGH, the carrier is on; when LOW, the carrier is off. The modulated signal crosses the silicon dioxide (SiO2) capacitive isolation barrier, which provides galvanic isolation while coupling the high-frequency AC signal. The receiver demodulates the signal by detecting the presence or absence of the carrier. The 10 ns propagation delay includes the modulation, capacitive coupling, and demodulation latency. The SiO2 isolation barrier has a breakdown voltage exceeding 12 kV, providing the 5000 Vrms (1 minute) rating with significant margin. The 2 ns pulse width distortion results from symmetric rise/fall path matching in the receiver. Each side has independent supply rails (VCC1/VCC2), allowing level translation between different voltage domains.

Pin Description: ISO7131CCDBQR Pin Definition and Functions
Pin Name Type Function
1 VCC1 Power Side 1 supply (2.875-5.5V)
2 INA Input Channel A input (forward)
3 OUTB Output Channel B output (reverse)
4 INC Input Channel C input (forward)
5 IND Input Channel D input (forward)
6 GND1 Power Side 1 ground
7 NC – No connect
8 NC – No connect
9 NC – No connect
10 NC – No connect
11 GND2 Power Side 2 ground
12 OUTD Output Channel D output (forward)
13 OUTC Output Channel C output (forward)
14 INB Input Channel B input (reverse)
15 OUTA Output Channel A output (forward)
16 VCC2 Power Side 2 supply (2.875-5.5V)
Application Scenarios: In which products and applications is ISO7131CCDBQR used
  • SPI bus isolation: SCLK+MOSI+CS forward, MISO reverse with single IC
  • Motor drive gate signal isolation with 5000Vrms reinforced rating
  • Medical equipment UART isolation with 150Mbps data rate
  • Industrial PLC digital I/O isolation with 1200Vpeak working voltage
Alternative Models: What chips are recommended as replacements for ISO7131CCDBQR
Manufacturer Part Number Package Notes
TI ISO7141CCDBQR SSOP-16 4 forward channels version
TI ISO7741DWR SOIC-16 Next-gen, higher isolation
Silicon Labs Si8631BD-B-IS SOIC-16 3+1 channel, 150Mbps
ADI iCoupler ADuM1411CRWZ SOIC-16 3+1 channel, 100Mbps
Broadcom ACPL-064L-000E SOIC-16 4-channel opto-isolator, 25Mbps

Recommend Parts

MSP432P401RIPZR

Ultra-low-power Cortex-M4F MCU, 48MHz, 256KB Flash, 14-bit ADC, 850nA standby, 100-LQFP

Brand: TI

Package: 100-LQFP (14 x 14 x 1.4mm)

IN STOCK: 3750pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PTN78060WAH

4.5A positive-input buck-IT module, adjustable, SMD module

Brand: TI

Package: Module (34.3 x 19.3 x 8.2 mm)

IN STOCK: 4786pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC16F1526-I/PT

8-bit PIC16 MCU, 14KB Flash, 768B RAM, 30-ch 10-bit ADC, 10x CCP, 64-TQFP, XLP

Brand: MICROCHIP

Package: TQFP-64 (10.0 x 10.0 x 1.05 mm)

IN STOCK: 5600pcs

Cargo cycle: 3-7 Days

The minimum order is 1

R2A20178NP

8-channel 8-bit voltage output DAC, R-2R architecture, buffered rail-to-rail output, SPI interface up to 25MHz, 2.7-5.5V

Brand: Renesas

Package: 24-pin HWQFN (4x4x0.75mm)

IN STOCK: 6399pcs

Cargo cycle: 3-7 Days

The minimum order is 1

VS-40CPQ100-N3

Dual Schottky rectifier, common cathode, 2x20A, 100V, 0.61V VF, TO-247AC-3L, Vishay Q-series, 175 degC TJ, guard ring

Brand: VISHAY

Package: TO-247AC 3L (3-lead through-hole, 15.5mm width, tab for heatsink, common cathode configuration)

IN STOCK: 8950pcs

Cargo cycle: 3-7 Days

The minimum order is 1

BSC040N10NS5

OptiMOS 5 N-ch 100V 4mΩ 136A MOSFET, SuperSO8

Brand: infineon

Package: PG-TDSON-8 (SuperSO8, 5 x 6mm)

IN STOCK: 10509pcs

Cargo cycle: 3-7 Days

The minimum order is 1