Opens in a new tab

ISO7330CDW

3-channel digital isolator, 3000Vrms, 25Mbps, SOIC-16

5909

Effective Inventory

Image for reference only

Manufacturer Part:

ISO7330CDW

Package:

SOIC-16 (7.5mm width, 300mil)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The ISO7330CDW from TI is a 3-channel general-purpose digital isolator providing 3000Vrms galvanic isolation, 25Mbps data rate, and 70kV/us CMTI in SOIC-16 package.

Key Specifications

Channels 3 Forward / 0 Reverse
Isolation Voltage 3000 Vrms
Data Rate 25 Mbps
CMTI 70 kV/us
Propagation Delay 32ns typ
Default Output High Level
Supply 3-5.5V (both sides)
Iq per channel 1.5mA typ @ 1Mbps
Temp -40 to 125C
Package SOIC-16-300mil

Features

  • 3-channel forward digital isolation
  • 3000Vrms isolation rating
  • 25Mbps maximum data rate
  • 70kV/us high CMTI for noisy environments
  • 32ns typical propagation delay
  • Fail-safe high default output
  • 3-5.5V dual supply operation
  • Low power: 1.5mA per channel at 1Mbps
  • EMC-compliant design

Applications

  • Industrial communication isolation
  • Motor drive signal isolation
  • Power supply feedback isolation
  • Medical equipment isolation barriers
  • PLC and DCS I/O modules
  • Isolated SPI/I2C/UART interfaces
Product Introduction: ISO7330CDW Product Introduction

The ISO7330CDW from TI is a 3-channel digital isolator providing 3000Vrms galvanic isolation with 25Mbps data rate. The high 70kV/us CMTI makes it suitable for noisy motor drive and industrial environments. The SOIC-16 package provides a compact isolation solution.

Working Principle: ISO7330CDW Working Principle

The ISO7330 uses silicon-dioxide (SiO2) insulation between input and output sides. Each channel consists of a modulator on the input side and a demodulator on the output side, connected through the isolation barrier. The modulator encodes digital input into high-frequency pulses that cross the barrier via on-chip capacitors. The demodulator reconstructs the digital signal on the isolated side.

Pin Description: ISO7330CDW Pin Definition and Functions
Pin Group Count Function
Side 1 I/O 3 Channel inputs (VCCA side)
Side 2 I/O 3 Channel outputs (VCCB side)
VCCA/VCCB 2 3-5.5V supplies (each side)
GND1/GND2 2 Grounds (each side)
Enable 2 Output enables (each side)
Application Scenarios: In which products and applications is ISO7330CDW used
  • Industrial communication isolation
  • Motor drive signal isolation
  • Medical equipment barriers
  • Isolated SPI/UART interfaces
Alternative Models: What chips are recommended as replacements for ISO7330CDW
Manufacturer Part Number Notes
TI ISO7331CDW 2F/1R channel config
TI ISO7730 Next-gen, 5000Vrms
Analog Devices ADuM1301 Pin-compatible alternative
Silicon Labs Si8631 3-channel isolator

Recommend Parts

ISL95855HRTZ-T

IMVP8 3+2+1 phase buck controller, R3 technology, 4.5-25V input, 48-TQFN

Brand: Renesas

Package: 48-TQFN (6×6 mm, exposed pad)

IN STOCK: 2156pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4019PBF

150V N-Channel HEXFET Power MOSFET, 47A, 34 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 2409pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSP430F247TPMR

TI MSP430 MCU, 16-bit RISC, 92KB Flash, 8KB RAM, 16MHz, LQFP-64

Package: See datasheet

IN STOCK: 13371pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1