Opens in a new tab

ISO7341FCDWR

Quad digital isolator, 150Mbps, 5000Vrms, SOIC-16W

13132

Effective Inventory

Image for reference only

Manufacturer Part:

ISO7341FCDWR

Package:

SOIC-16W (10.3×7.5mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The ISO7341FCDWR from TI is a quad-channel reinforced digital isolator with 150Mbps data rate, 5000Vrms isolation, and 3/1 channel direction in SOIC-16W.

Key Specifications

Package SOIC-16W (10.3×7.5mm)

Features

  • See datasheet for complete specifications
  • Industry-standard package

Applications

  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Power management
Product Introduction: ISO7341FCDWR Product Introduction

The ISO7341FCDWR from TI is a quad-channel reinforced digital isolator with 150Mbps data rate, 5000Vrms isolation, and 3/1 channel direction in SOIC-16W.

Working Principle: ISO7341FCDWR Working Principle

The ISO7341FCDWR is a quad digital isolator from TI in SOIC-16W with 5000Vrms isolation rating and 150Mbps data rate (F suffix). It uses capacitive isolation technology with silicon dioxide (SiO2) dielectric between on-chip capacitor plates. Each channel consists of a transmitter that encodes the input signal into high-frequency pulses, and a receiver that decodes them on the isolated side. The SiO2 dielectric provides 5000Vrms isolation withstand voltage (higher than the 2500Vrms standard grade). The 150Mbps data rate supports high-speed digital protocols including SPI at 75MHz. Each side operates independently at 2.375-5.5V, enabling level translation across the isolation barrier. The device draws only 1.5mA per channel at 5V with 1Mbps data rate. The refresh circuit transmits DC state updates every 4us to maintain correct output even when input is static. Propagation delay is 10ns typical with 2ns channel-to-channel skew. The C suffix indicates default output state: channels A,C are high (if side 1 is unpowered), channels B,D are low. The D suffix specifies 5000Vrms rating. The W suffix indicates wide body (300mil) SOIC package. The EN pins (EN1, EN2) independently disable outputs on each side for power management. Applications include industrial communication isolation, motor drive isolation, and medical equipment isolation.

Pin Description: ISO7341FCDWR Pin Definition and Functions
Pin Name Type Function
1 VCC1 Power Side 1 supply (2.375-5.5V)
2 INA Input Channel A input (side 1)
3 OUTA Output Channel A output (side 2)
4 INB Input Channel B input (side 1)
5 OUTB Output Channel B output (side 2)
6 GND1 Power Side 1 ground
7 GND2 Power Side 2 ground
8 VCC2 Power Side 2 supply (2.375-5.5V)
9-16 INC/OUTC/IND/OUTD/EN1/EN2 I/O Channels C,D + enable pins
Application Scenarios: In which products and applications is ISO7341FCDWR used
  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Power management
  • Alternative Models: What chips are recommended as replacements for ISO7341FCDWR
    Manufacturer Part Number Package Notes
    Texas Instruments ISO7340FCDWR SOIC-16W Same family, 3-channel version
    Analog Devices ADUM3441CRWZ-RL SOIC-16W Quad digital isolator, 150Mbps
    Silicon Labs Si8631BB-B-IS1 SOIC-16 Triple digital isolator, 150Mbps
    Broadcom ACSL-6420-00RE SOIC-16 Quad optocoupler alternative
    TI ISO7741FDWR SOIC-16W Quad digital isolator, 100Mbps, 5kVrms

    Recommend Parts

    MCP6S26-I

    6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

    Brand: MICROCHIP

    Package: SOIC-14 (150 mils body width)

    IN STOCK: 6800pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    W25Q80VSSI

    8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

    Brand: Winbond

    Package: SOIC-8 208mil (5.3×8.0mm)

    IN STOCK: 4316pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    MM3Z9V1

    9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

    Brand: ON

    Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

    IN STOCK: 10735pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    AT89S51

    8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

    Package: PDIP-40 / TQFP-44 / PLCC-44

    IN STOCK: 15000pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    GD32F303CBT6

    Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

    Brand: gigadevice

    Package: LQFP-48 (7x7mm, 0.5mm pitch)

    IN STOCK: 3342pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    MIC5205-3.3YM5-TR

    3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

    Brand: MICROCHIP

    Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

    IN STOCK: 9858pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1