Opens in a new tab

ISO7641FMDWR

Quad-channel digital isolator, 5000Vrms, 150Mbps, SOIC-16

13199

Effective Inventory

Image for reference only

Manufacturer Part:

ISO7641FMDWR

Package:

SOIC-16W

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The ISO7641FMDWR from TI is a quad-channel digital isolator providing 5000Vrms isolation at up to 150Mbps in SOIC-16W for industrial communication isolation.

Key Specifications

Package SOIC-16W

Features

  • See datasheet for complete specifications
  • Industry-standard package

Applications

  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Automotive electronics
Product Introduction: ISO7641FMDWR Product Introduction

The ISO7641FMDWR from TI is a quad-channel digital isolator providing 5000Vrms isolation at up to 150Mbps in SOIC-16W for industrial communication isolation.

Working Principle: ISO7641FMDWR Working Principle

The ISO7641FMDWR is a quad-channel digital isolator from Texas Instruments in SOIC-16W, providing 5000Vrms galvanic isolation at 150Mbps data rate. The 4 channels are split 3/1: three channels forward (A,B,C side 1 to side 2) and one channel reverse (D side 2 to side 1). The -F suffix specifies the channel direction (3F/1R). The isolation uses silicon dioxide (SiO2) dielectric between two transformer coils, manufactured with TI’s planar transformer technology. Unlike optocouplers, the digital isolator uses RF coupling: the input signal modulates a 300MHz carrier that is magnetically coupled across the isolation barrier, then demodulated on the output side. This provides: (1) Much higher speed (150Mbps vs 10Mbps for optocouplers); (2) No LED degradation (optocouplers age due to LED CTR degradation); (3) Lower power (3mA per channel vs 5-15mA for optocouplers); (4) Wider temperature range (-55C to +125C). The M suffix specifies 5000Vrms isolation (vs D suffix for 2500Vrms). The propagation delay is 10ns typical with 2ns channel-to-channel matching. The default output state is LOW when input is unpowered (failsafe). The -DWR suffix specifies SOIC-16W, tape-and-reel. Applications include: SPI/I2C isolation for ADCs, motor drive signal isolation, and industrial communication interfaces.

Pin Description: ISO7641FMDWR Pin Definition and Functions
Pin Name Type Function
1 VCC1 Power Side 1 supply (3.0-5.5V, connect with 0.1uF ceramic)
2-4 INA-INC Input Side 1 logic inputs (3 channels, TTL/CMOS compatible)
5 GND1 Power Side 1 ground
6-8 OUTD-OUTF Output Side 1 logic outputs (3 channels, CMOS push-pull)
9-11 OUTA-OUTC Output Side 2 logic outputs (3 channels, CMOS push-pull)
12 VCC2 Power Side 2 supply (3.0-5.5V)
13-15 IND-INF Input Side 2 logic inputs (3 channels)
16 GND2 Power Side 2 ground
Application Scenarios: In which products and applications is ISO7641FMDWR used
  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Automotive electronics
  • Alternative Models: What chips are recommended as replacements for ISO7641FMDWR
    Manufacturer Part Number Package Notes
    Texas Instruments ISO7641FMDWR SOIC-16W Same device, TI brand
    Texas Instruments ISO7640FM SOIC-16W 4-channel, all same direction
    Analog Devices ADuM7641BRWZ-RL SOIC-16W Quad digital isolator, ADI brand
    Silicon Labs Si8641AB-B-IS1 SOIC-16 Quad digital isolator, SiLabs brand
    Broadcom ACPL-M71L-000E SOIC-6 Single digital isolator, Broadcom brand

    Recommend Parts

    MCP6S26-I

    6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

    Brand: MICROCHIP

    Package: SOIC-14 (150 mils body width)

    IN STOCK: 6800pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    W25Q80VSSI

    8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

    Brand: Winbond

    Package: SOIC-8 208mil (5.3×8.0mm)

    IN STOCK: 4316pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    MM3Z9V1

    9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

    Brand: ON

    Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

    IN STOCK: 10735pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    AT89S51

    8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

    Package: PDIP-40 / TQFP-44 / PLCC-44

    IN STOCK: 15000pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    GD32F303CBT6

    Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

    Brand: gigadevice

    Package: LQFP-48 (7x7mm, 0.5mm pitch)

    IN STOCK: 3342pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    MIC5205-3.3YM5-TR

    3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

    Brand: MICROCHIP

    Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

    IN STOCK: 9858pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1