Opens in a new tab

ISO7720DR

Dual-channel reinforced digital isolator, 5000VRMS, 100Mbps, >100kV/µs CMTI, SOIC-8

5420

Effective Inventory

Image for reference only

Manufacturer Part:

ISO7720DR

Package:

SOIC-8 Wide (7.5 x 5.85 x 2.35mm, 1.27mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The ISO7720DR is a dual-channel reinforced digital isolator from Texas Instruments with 5000VRMS isolation, 100Mbps data rate, and >100kV/µs CMTI in an SOIC-8 package.

Key Specifications

Number of Channels 2
Channel Direction Both same direction (ISO7720)
Isolation Rating 5000 VRMS (reinforced), 8000 Vpeak transient
Data Rate 0 to 100Mbps (NRZ)
Propagation Delay 10.5ns typical
Pulse Width Distortion 2ns typical
CMTI >100kV/µs
Supply Voltage 2.25V to 5.5V per side
Supply Current (per channel) 1.5mA typical at 5V, 1Mbps
Operating Temperature -40°C to +125°C
Safety Ratings UL 1577, CSA, IEC 60747-17, VDE
Package SOIC-8 (wide body, 7.5mm)

Features

  • Reinforced isolation: 5000VRMS for 1 minute
  • High CMTI: >100kV/µs for noise immunity
  • 100Mbps data rate supports high-speed interfaces
  • Low propagation delay: 10.5ns typical
  • Dual supply: 2.25V to 5.5V on each side independently
  • Level translation across isolation barrier
  • Robust EMC performance for industrial environments
  • Default output state: low when input power is lost

Applications

  • Industrial automation and PLC isolation
  • SPI and UART communication isolation
  • Motor drive gate driver isolation
  • Medical equipment galvanic isolation
  • Power supply feedback loop isolation
Product Introduction: ISO7720DR Product Introduction

The ISO7720DR is a dual-channel reinforced digital isolator from Texas Instruments using silicon dioxide (SiO2) insulation to provide 5000VRMS galvanic isolation. It supports data rates up to 100Mbps with only 10.5ns typical propagation delay and >100kV/µs common-mode transient immunity. The device operates with independent 2.25V to 5.5V supplies on each side, enabling voltage level translation across the isolation barrier. The ISO7720 variant has both channels in the same direction. The device meets UL 1577, IEC 60747-17, and VDE safety standards for reinforced isolation, making it suitable for industrial and medical applications.

Working Principle: ISO7720DR Working Principle

The ISO7720DR uses TI’s silicon dioxide (SiO2) isolation technology with on-chip capacitive coupling. Each channel consists of a transmitter on one side of the isolation barrier and a receiver on the other side. The transmitter encodes the input logic state into high-frequency RF pulses (several GHz carrier) that are capacitively coupled across the thin SiO2 dielectric to the receiver. The receiver decodes the RF signal and reproduces the original logic state. The SiO2 dielectric provides both electrical isolation (5000VRMS breakdown) and a low-loss coupling path for the RF signal. The high CMTI (>100kV/µs) results from the differential coupling architecture that rejects common-mode transients. When the input side loses power, the receiver output assumes a defined default state (low) to prevent undefined operation. The 10.5ns propagation delay is achieved by the high-speed RF modulation and demodulation, supporting 100Mbps NRZ data. The independent supply domains on each side allow voltage level translation, for example converting 3.3V logic on one side to 5V logic on the other.

Pin Description: ISO7720DR Pin Definition and Functions
Pin Name Type Description
1 VCC1 Power Side 1 supply (2.25V-5.5V)
2 IN1 Input Channel 1 logic input (side 1)
3 OUT2 Output Channel 2 logic output (side 1)
4 GND1 Power Side 1 ground
5 GND2 Power Side 2 ground
6 IN2 Input Channel 2 logic input (side 2)
7 OUT1 Output Channel 1 logic output (side 2)
8 VCC2 Power Side 2 supply (2.25V-5.5V)
Application Scenarios: In which products and applications is ISO7720DR used
  • Industrial PLC: 5000VRMS reinforced isolation protects operators and equipment from high-voltage faults in PLC I/O modules
  • SPI Isolation: 100Mbps data rate isolates SPI clocks and data lines in motor drive and power converter systems
  • Medical Equipment: IEC 60747-17 reinforced isolation meets patient safety requirements in medical monitoring devices
  • Motor Drives: >100kV/µs CMTI prevents data corruption from high dV/dt switching transients in inverter gate driver interfaces
  • Level Translation: Independent 2.25-5.5V supplies on each side translate logic levels across the isolation barrier
Alternative Models: What chips are recommended as replacements for ISO7720DR
Model Manufacturer Key Difference Package Specs
ISO7721DR TI Opposite direction channels (1 forward, 1 reverse) – –
ISO7720FD TI Failsafe high output default state – –
ADuM1200BRZ ADI Dual-channel, 5kVRMS, SOIC-8 – –
Si8620BB-IS Skyworks/Silicon Labs Dual-channel, 5kVRMS, 150Mbps – –
CNL7220BIW-SN CEL Dual-channel, 5kVRMS, SOIC-8 – –

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1