Opens in a new tab

KSZ8041TL

10/100 Ethernet PHY, MII/RMII/SMII, 48-TQFP, low power

5214

Effective Inventory

Image for reference only

Manufacturer Part:

KSZ8041TL

Package:

48-pin TQFP (7 x 7 x 1.6 mm, 0.5mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The KSZ8041TL is a single-chip 10Base-T/100Base-TX physical layer transceiver with multiple interface options, manufactured by Microchip Technology (formerly Micrel). This low-power CMOS PHY provides a complete physical layer solution supporting MII, RMII, and SMII (Serial MII) interfaces for flexible connection to various MAC layer controllers. The KSZ8041TL features HP Auto MDI/MDI-X for automatic cable crossover detection, LinkMD® TDR-based cable diagnostics, and programmable LED outputs. With power consumption under 180mW, single 3.3V supply operation with integrated 1.8V regulator, and a 48-pin TQFP package, the KSZ8041TL is ideal for applications requiring multiple PHY interface options including media converters, IP phones, set-top boxes, and networking equipment.

Key Specifications

Manufacturer Microchip Technology (Micrel)
Product Type 10/100 Ethernet PHY Transceiver
Standard Compliance IEEE 802.3u
Data Rates 10 Mbps / 100 Mbps
Interface Options MII, RMII, SMII
Supply Voltage 3.3 V (single supply)
Core Voltage 1.8 V (internal regulator)
Power Consumption < 180 mW (typical)
Supply Current 58.3 mA (typical at 3.3V)
HP Auto MDI/MDI-X Yes
LinkMD Cable Diagnostics Yes (TDR-based)
Cable Distance Up to 100m (CAT5)
Jumbo Frame Support Up to 2000 bytes
ESD Protection 6 kV (HBM)
Operating Temperature 0°C to +70°C (commercial)
Industrial (I suffix) -40°C to +85°C
Package 48-pin TQFP (7 x 7 mm)
Status In Production

Features

  • Single-chip 10Base-T/100Base-TX physical layer transceiver
  • Fully compliant with IEEE 802.3u standard
  • Supports MII, RMII, and SMII interfaces
  • HP Auto MDI/MDI-X — automatic crossover detection
  • Low power consumption: < 180mW
  • Single 3.3V supply with integrated 1.8V regulator
  • Power-down and power-saving modes
  • LinkMD® TDR-based cable diagnostics
  • MIIM (MDC/MDIO) management interface (up to 6.25MHz)
  • Interrupt pin option for system events
  • Programmable LED output pins
  • Robust operation over standard cable
  • Baseline wander correction

Applications

  • Media converters and Ethernet transceivers
  • Printers and multi-function devices
  • IP phones and VoIP gateways
  • IPTV and set-top boxes
  • Game consoles and networked gaming
  • LAN on motherboard (LOM)
  • Network switches and routers
  • Industrial networking and automation
Product Introduction: KSZ8041TL Product Introduction

The KSZ8041TL from Microchip Technology (formerly Micrel) is a highly integrated single-chip 10Base-T/100Base-TX Ethernet physical layer transceiver designed for applications requiring multiple PHY interface options. Building on the proven KSZ8041 architecture, the TL variant adds SMII (Serial MII) interface support in addition to MII and RMII, making it ideal for media converters, switches, and other networking equipment. HP Auto MDI/MDI-X provides automatic crossover detection and correction, eliminating the need for special crossover cables. The LinkMD® TDR-based cable diagnostic feature allows detection and location of cable faults including opens and shorts. With power consumption under 180mW and integrated 1.8V regulator allowing single 3.3V supply operation, the KSZ8041TL minimizes system power and component count. The device supports power-down mode and power-saving modes for energy-efficient operation. The MIIM management interface provides access to all IEEE standard PHY registers plus extended vendor-specific registers. Programmable LED outputs indicate link status, activity, speed, and duplex mode. An interrupt pin notifies the host system of link status changes and other events. Available in a 48-pin TQFP package, the KSZ8041TL offers the flexibility needed for a wide range of 10/100 Ethernet applications including media converters, network interface cards, IP phones, set-top boxes, industrial control, and networking infrastructure equipment.

Working Principle: KSZ8041TL Working Principle

The KSZ8041TL operates as a complete 10/100 Ethernet PHY with MII/RMII/SMII interface options. Its architectural blocks include: 1) Multi-Interface MAC Layer: The KSZ8041TL supports three MAC interface options configured via strap pins: MII (Media Independent Interface) with 4-bit wide transmit/receive data paths at 25MHz; RMII (Reduced MII) with 2-bit wide data paths using a 50MHz reference clock; and SMII (Serial MII) with a single-bit serial data path at 125MHz. This flexibility allows the same PHY chip to be used with different MAC controllers. 2) PCS (Physical Coding Sublayer): For 100Base-TX operation, the PCS performs 4B/5B encoding/decoding, scrambler/descrambler functions, and auto-negotiation. Auto-negotiation automatically detects and configures the best speed (10/100Mbps) and duplex (half/full) mode with the link partner per IEEE 802.3u Clause 28. 3) PMA (Physical Medium Attachment): The PMA handles the analog front-end including MLT-3 encoder/decoder for 100Base-TX and Manchester encoder/decoder for 10Base-T. The transmitter drives the differential output onto the twisted-pair cable via an external magnetics module. The receiver includes adaptive equalization to compensate for cable insertion loss, and clock/data recovery (CDR) circuitry to extract the clock and data from the incoming signal. 4) Auto MDI/MDI-X: HP Auto MDI/MDI-X technology automatically detects whether a straight-through or crossover cable is connected and swaps the transmit and receive pairs accordingly. This eliminates the need for crossover cables and reduces installation complexity. 5) Cable Diagnostics: LinkMD® technology uses Time Domain Reflectometry (TDR) to detect and locate cable faults such as open circuits and short circuits, enabling remote fault diagnosis without physical inspection of the cable.

Pin Description: KSZ8041TL Pin Definition and Functions
Pin Category Pin Name(s) Function Description
Power VDDIO, VDDA, VDDL 3.3V I/O, 3.3V analog, 1.8V core (internal reg)
Ground GND, GNDA, GNDL Digital ground, analog ground, core ground
MII Receive RXD[3:0], RXDV, RXER, RXCLK, COL, CRS 4-bit data, valid, error, clock, collision, carrier sense
MII Transmit TXD[3:0], TXEN, TXER, TXCLK 4-bit data, enable, error, clock
RMII Mode RXD[1:0], TXD[1:0], TXEN, CRS_DV, REF_CLK 2-bit data, enable, carrier sense/data valid, 50MHz ref
SMII Mode SYNC, SMII_RX, SMII_TX, SMII_CLK Sync signal, serial RX/TX, 125MHz clock
Management MDC, MDIO Management data clock, data I/O (MIIM interface)
Status LEDs LED0, LED1, LED2 Programmable LED outputs (link, activity, speed, duplex)
Interrupt INTRP Interrupt output (open-drain, active low)
MDI Interface TX+, TX-, RX+, RX- Differential twisted-pair interface (via magnetics)
Configuration CONFIG[0:3], MODE[0:2] Configuration strap pins (sampled at reset)
Reset RST# Chip reset input (active low)
Crystal/Clock XTAL1, XTAL2, CLK_50 25MHz crystal, 50MHz output/reference
Application Scenarios: In which products and applications is KSZ8041TL used
  • Ethernet media converters (fiber to copper, etc.)
  • Network interface cards and LAN adapters
  • IP phones, video phones, and VoIP endpoints
  • IPTV set-top boxes and OTT streaming devices
  • Network switches with PHY per port (via SMII)
  • Printers, scanners, and multi-function peripherals
  • Industrial networking and factory automation equipment
  • Test and measurement instruments with Ethernet connectivity
Alternative Models: What chips are recommended as replacements for KSZ8041TL
Manufacturer Part Number Package Notes
Microchip KSZ8041NL 32-QFN MII/RMII only, smaller package
Microchip KSZ8041FTL 48-TQFP 100Base-FX fiber support
Microchip KSZ8051MLL 48-LQFP Newer generation, MII/RMII
Texas Instruments DP83848I 48-LQFP Industrial temp, PHYTER
Realtek RTL8211F 48-QFN Gigabit PHY (higher speed)

Recommend Parts

ISL95855HRTZ-T

IMVP8 3+2+1 phase buck controller, R3 technology, 4.5-25V input, 48-TQFN

Brand: Renesas

Package: 48-TQFN (6×6 mm, exposed pad)

IN STOCK: 2156pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1