Opens in a new tab

KSZ8081RNBIA TR

10BASE-T/100BASE-TX Ethernet PHY transceiver with RMII interface, 3.3V supply, QFN-32 package

8742

Effective Inventory

Image for reference only

Manufacturer Part:

KSZ8081RNBIA TR

Package:

QFN-32 EP (5x5mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The KSZ8081RNBIA TR is a single-supply 10BASE-T/100BASE-TX Ethernet physical-layer transceiver manufactured by Microchip Technology. It is designed for transmission and reception of data over standard CAT-5 unshielded twisted pair (UTP) cable. This highly-integrated PHY solution features RMII v1.2 interface support with a 50MHz reference clock output to MAC, reducing board cost and simplifying board layout with on-chip termination resistors and an integrated low-noise regulator.

Key Specifications

Parameter Value
Manufacturer Microchip Technology
Device Type Ethernet PHY Transceiver
Standard IEEE 802.3 compliant
Data Rate 10Mbps / 100Mbps
Interface RMII v1.2
Supply Voltage 3.135V to 3.465V (3.3V typical)
Supply Current 47mA typical
Package QFN-32 EP (5mm x 5mm)
Operating Temperature -40°C to +85°C (Industrial)
ESD Rating 6kV HBM

Features

  • Single-chip 10Base-T/100Base-TX IEEE 802.3 compliant Ethernet transceiver
  • RMII v1.2 interface with 50MHz reference clock output to MAC
  • HP Auto MDI/MDI-X with disable and enable option
  • MDC/MDIO management interface for PHY register configuration
  • Programmable interrupt output and LED status indicators
  • On-chip termination resistors for differential pairs
  • Baseline wander correction and built-in 1.2V regulator for core
  • LinkMD TDR-based cable diagnostics for faulty copper cabling
  • Parametric NAND tree support for fault detection
  • Power-down and power-saving modes

Applications

  • Game consoles and set-top boxes
  • IP phones and IP TVs
  • Network printers and LOM
  • Industrial Ethernet equipment
  • Embedded systems with networking capability
Product Introduction: KSZ8081RNBIA TR Product Introduction

The KSZ8081RNBIA TR is a single-supply 10BASE-T/100BASE-TX Ethernet physical-layer transceiver from Microchip Technology. It provides a highly integrated PHY solution that reduces board cost and simplifies board layout by using on-chip termination resistors for the differential pairs and integrating a low-noise regulator to supply the 1.2V core. The device offers RMII v1.2 interface support with a 50MHz reference clock output to MAC, making it ideal for direct connection to RMII-compliant Ethernet MACs in processors and switches. With LinkMD TDR-based cable diagnostics, HP Auto MDI/MDI-X, and comprehensive power management features, the KSZ8081RNBIA TR delivers robust performance for a wide range of Ethernet applications.

Working Principle: KSZ8081RNBIA TR Working Principle

The KSZ8081RNBIA TR operates as an Ethernet physical layer transceiver that converts digital data from the MAC layer into analog signals for transmission over twisted pair copper cable, and vice versa. On the transmit side, digital data from the RMII interface is encoded and driven onto the differential pairs using 10BASE-T or 100BASE-TX signaling. On the receive side, incoming analog signals are equalized, decoded, and converted back to digital data for the MAC. The device auto-negotiates the best possible link speed and duplex mode. An integrated 1.2V regulator powers the core, while VDD I/O supports 1.8V, 2.5V, or 3.3V levels for flexible interfacing.

Pin Description: KSZ8081RNBIA TR Pin Definition and Functions
Pin Name Description
1-6 RXI/N, TXO/N Differential receive and transmit pairs
7-10 MDIO, MDC, INTRP, RXD0-2 Management interface and receive data
11-14 RXER, CRS_DV, REF_CLK Receive error, carrier sense, reference clock
15-18 TXEN, TXD0-1 Transmit enable and data
19-22 LED0/1, CONFIG0-2 LED indicators and configuration pins
23-28 VDDA, VDDIO, VDDL Power supply pins
29-32 GND, XTAL1/2 Ground and crystal oscillator
Application Scenarios: In which products and applications is KSZ8081RNBIA TR used
  • IP phones, set-top boxes, and smart TVs
  • Industrial Ethernet and factory automation
  • Network printers and scanners
  • Embedded systems with Ethernet connectivity
  • IoT gateways and edge devices
Alternative Models: What chips are recommended as replacements for KSZ8081RNBIA TR
Model Manufacturer Package
KSZ8081MNXIA Microchip QFN-32 (MII interface)
KSZ8091RNA Microchip QFN-24 (10/100/1000)
LAN8720A Microchip QFN-24
DP83848 TI WQFN-40

Recommend Parts

ISL95855HRTZ-T

IMVP8 3+2+1 phase buck controller, R3 technology, 4.5-25V input, 48-TQFN

Brand: Renesas

Package: 48-TQFN (6×6 mm, exposed pad)

IN STOCK: 2156pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4019PBF

150V N-Channel HEXFET Power MOSFET, 47A, 34 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 2409pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSP430F247TPMR

TI MSP430 MCU, 16-bit RISC, 92KB Flash, 8KB RAM, 16MHz, LQFP-64

Package: See datasheet

IN STOCK: 13371pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1