Opens in a new tab

L200CV

Adj 2.85-36V 2A V/I regulator, Pentawatt-5, thermal/short-circuit protection

5880

Effective Inventory

Image for reference only

Manufacturer Part:

L200CV

Package:

Pentawatt-5 / 5-PENTAWATT (vertical, bent and staggered leads, through-hole)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The L200CV from STMicroelectronics is an adjustable voltage and current regulator in a Pentawatt-5 through-hole package. It provides adjustable output voltage from 2.85V to 36V at up to 2A, with simultaneous voltage and current regulation. Features include thermal shutdown, short-circuit protection, and input overvoltage protection up to 60V for 10ms.

Key Specifications

Output Voltage Range 2.85V to 36V (adjustable)
Output Current 2 A maximum
Input Voltage (Max) 40V DC (60V peak, 10ms)
Dropout Voltage 2.5V max @ 1.5A
Reference Voltage (Pin 4) 2.77V typical
Quiescent Current 4.2 mA typical
Line Regulation 60 dB (100Hz)
Load Regulation 0.15% typical
Current Limit Sense Voltage 0.45V typical (Pins 2-5)
Operating Temperature -25 to 150 C (C suffix)
Package Pentawatt-5 (vertical, bent leads)

Features

  • Adjustable output voltage: 2.85V to 36V
  • Adjustable output current limiting
  • Input overvoltage protection: 60V for 10ms
  • Thermal shutdown protection
  • Short-circuit protection
  • Output transistor safe operating area protection
  • Low bias current on regulation pin
  • Low standby current drain
  • Replaces fixed voltage regulators with higher precision

Applications

  • Adjustable bench power supply
  • Battery charger with constant voltage/current
  • Programmable voltage and current source
  • Motor speed controller with current limiting
  • Laboratory power supply
Product Introduction: L200CV Product Introduction

The L200CV from ST is an adjustable voltage and current regulator in Pentawatt-5 package. Provides adjustable 2.85-36V output at up to 2A with simultaneous voltage and current regulation. Internal 2.77V reference on Pin 4 sets the output voltage. Current limiting is set by a sense resistor between Pins 2 and 5 (0.45V sense voltage). Features thermal shutdown, SOA protection, and 60V/10ms input overvoltage protection. C suffix denotes -25 to 150C operating range. V suffix denotes Pentawatt package. Note: This part is marked as obsolete by some distributors.

Working Principle: L200CV Working Principle

The L200 contains two independent regulation loops: a voltage regulation loop and a current regulation loop. The voltage loop compares a fraction of the output voltage (via external divider from Pin 5 to Pin 4 to ground) against the internal 2.77V reference. The current loop monitors the voltage across an external sense resistor between Pins 2 and 5. When the voltage drop exceeds 0.45V (corresponding to the set current limit), the current loop takes over and reduces the output voltage to maintain constant current. The two loops work together: the voltage loop dominates when load current is below the set limit, and the current loop dominates when the limit is exceeded. This dual-loop architecture enables constant-voltage/constant-current (CV/CC) power supply design.

Pin Description: L200CV Pin Definition and Functions
Pin Name Type Function
1 IN Power Unregulated input voltage (up to 40V)
2 Current Limit Sense Current limit sense (connect Rsc to Pin 5)
3 GND Ground Common ground
4 Reference Output 2.77V reference output (for voltage setting)
5 OUT Output Regulated output voltage
Application Scenarios: In which products and applications is L200CV used
  • 0-30V adjustable bench power supply with CV/CC modes
  • Lead-acid battery charger with voltage and current limiting
  • NiMH/NiCd battery charger with constant current phase
  • Motor driver with current-limited startup
  • LED string driver with constant current regulation
Alternative Models: What chips are recommended as replacements for L200CV
Manufacturer Part Number Package Notes
ST L200CH TO-3 (4-lead) Metal can version, better thermal
TI LM317T TO-220 Voltage-only adjustable, more common
TI LM338K TO-3 5A adjustable regulator, voltage only

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1