Opens in a new tab

L298N

Dual full-bridge motor driver, 46V, 4A total, TTL logic, Multiwatt-15, DC/stepper motors

10224

Effective Inventory

Image for reference only

Manufacturer Part:

L298N

Package:

Multiwatt-15 Vertical (through-hole, 20.2 x 5.0 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The L298N from STMicroelectronics is a Dual Full-Bridge Driver IC in a 15-lead Multiwatt vertical package. It is designed to accept standard TTL logic levels and drive inductive loads such as relays, solenoids, DC motors, and stepper motors at supply voltages up to 46 V and total DC current up to 4 A.

Key Specifications

Configuration Dual Full Bridge
Supply Voltage Up to 46 V
Output Current (per bridge) 2 A DC
Total DC Current 4 A
Peak Output Current 3 A
Logic Input Voltage TTL compatible
Enable Inputs 2 (independent)
Saturation Voltage Low (1.8V typ @ 1A)
Operating Temperature -25°C to +130°C
Package Multiwatt-15 Vertical

Features

  • Operating supply voltage up to 46 V
  • Total DC current up to 4 A
  • Low saturation voltage for higher efficiency
  • Overtemperature protection
  • Logical “0” input voltage up to 1.5 V (high noise immunity)
  • Two independent enable inputs
  • External sense resistor connections for current monitoring

Applications

  • Dual brush DC motor drive
  • Stepper motor control
  • Relay and solenoid driving
  • Robotics and automation
  • Automotive motor control
Product Introduction: L298N Product Introduction

The L298N from STMicroelectronics is a high-voltage, high-current dual full-bridge driver IC designed to accept standard TTL logic levels and drive inductive loads such as DC motors, stepper motors, relays, and solenoids. It is one of the most widely used motor driver ICs in hobbyist and educational projects. The device features two enable inputs for independent bridge control, and the lower transistors of each bridge have their emitters connected together for external current sensing via sense resistors.

Working Principle: L298N Working Principle

The L298N contains two independent full H-bridge circuits, each capable of driving a DC motor bidirectionally or a stepper motor coil. Each bridge consists of four power transistors in an H-bridge configuration. By applying appropriate logic levels to the input pins (IN1/IN2 for bridge A, IN3/IN4 for bridge B), the current direction through the load can be reversed, enabling forward/reverse motor control. The enable pins (ENA, ENB) allow PWM speed control when driven with a pulse-width modulated signal. Current sensing is achieved by connecting sense resistors between the sense pins and ground.

Pin Description: L298N Pin Definition and Functions
Pin Name Type Function
1 CURRENT SENSE A Output Bridge A current sense (connect sense resistor to GND)
2 OUTPUT 1 Output Bridge A output 1 (motor terminal)
3 OUTPUT 2 Output Bridge A output 2 (motor terminal)
4 VS Power Motor supply voltage (up to 46V)
5 INPUT 1 Input Bridge A logic input 1
6 ENABLE A Input Bridge A enable (active high, PWM input)
7 INPUT 2 Input Bridge A logic input 2
8 GND Ground Ground
9 VSS Power Logic supply voltage (5V)
10 INPUT 3 Input Bridge B logic input 1
11 ENABLE B Input Bridge B enable (active high, PWM input)
12 INPUT 4 Input Bridge B logic input 2
13 OUTPUT 3 Output Bridge B output 1 (motor terminal)
14 OUTPUT 4 Output Bridge B output 2 (motor terminal)
15 CURRENT SENSE B Output Bridge B current sense
Application Scenarios: In which products and applications is L298N used
  • DC motor speed and direction control
  • Bipolar stepper motor driving
  • Robot locomotion and arm control
  • Relay and solenoid switching
  • Automotive wiper and window motor control
Alternative Models: What chips are recommended as replacements for L298N
Manufacturer Part Number Package Notes
STMicroelectronics L298P PowerSO-20 SMD version of L298N
STMicroelectronics L298HN Multiwatt-15 H Horizontal mount variant
Texas Instruments DRV8833 HTSSOP-16 Dual H-bridge, lower voltage
Allegro A4988 TSSOP-28 Stepper driver with microstepping

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1