Opens in a new tab

LD2980CM18TR

Low-dropout regulator, fixed 1.8V, 100mA, 150mV dropout, SOT23-5L

8743

Effective Inventory

Image for reference only

Manufacturer Part:

LD2980CM18TR

Package:

SOT23-5L (2.9 x 2.8 x 1.3 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LD2980CM18TR from STMicroelectronics is a very low drop voltage regulator with a fixed 1.8V output, capable of supplying up to 100 mA output current. The device features an ultra-low dropout of 150 mV (typical at full load) and a quiescent current of just 1.2 mA. It is housed in a compact SOT23-5L package and includes short-circuit and thermal protection.

Key Specifications

Output Voltage 1.8V (fixed)
Maximum Output Current 100 mA
Dropout Voltage 150 mV (typical at 100 mA)
Quiescent Current 1.2 mA (typical)
Input Voltage Range 2.0V to 16V
Operating Temperature -40°C to +125°C
Package SOT23-5L
Packing Tape & Reel
Line Regulation 0.01%/V (typical)
Load Regulation 0.002%/mA (typical)

Features

  • Ultra-low dropout voltage: 150 mV at 100 mA
  • Fixed 1.8V output with ±2% accuracy
  • Very low quiescent current: 1.2 mA
  • Internal short-circuit current limiting
  • Thermal shutdown protection
  • Compatible with low ESR ceramic output capacitors
  • Available in SOT23-5L miniature package
  • No bypass capacitor required

Applications

  • Battery-powered portable devices
  • Post-regulation in switching power supplies
  • Mobile phone and PDA power management
  • Wireless communication modules
  • Low-noise analog circuit supply
  • IoT sensor node power
Product Introduction: LD2980CM18TR Product Introduction

The LD2980CM18TR is a very low dropout voltage regulator from STMicroelectronics, providing a fixed 1.8V output at up to 100 mA. With a typical dropout voltage of only 150 mV at full load, the device is ideal for battery-powered applications where maximizing battery life is critical. The regulator accepts input voltages from 2.0V to 16V and features a low quiescent current of 1.2 mA. The LD2980 family is available in multiple fixed output voltage options and uses a standard SOT23-5L package. The CM18TR suffix indicates the 1.8V output version in tape and reel packaging. The device includes built-in short-circuit current limiting and thermal shutdown protection for reliable operation under fault conditions. It is compatible with low ESR ceramic output capacitors, simplifying PCB design and reducing component count.

Working Principle: LD2980CM18TR Working Principle

The LD2980 operates through three key subsystems:

1. Voltage Reference and Error Amplifier: An internal bandgap voltage reference generates a stable 1.23V reference. A transconductance error amplifier compares the divided output voltage (via internal resistor divider for fixed versions) with the reference and adjusts the pass transistor drive to maintain regulation.

2. Pass Element: A PNP bipolar pass transistor provides the low dropout characteristic. Unlike NPN-based LDOs, the PNP configuration allows the input-to-output voltage differential to be as low as the saturation voltage of the transistor (150 mV typical), enabling operation from input voltages very close to the output.

3. Protection Circuits: An internal current limit circuit protects against output short circuits by limiting the pass transistor drive current. A thermal shutdown circuit disables the regulator when the junction temperature exceeds approximately 150°C, re-enabling it once the temperature drops below the hysteresis threshold. The device is stable with ceramic output capacitors of 2.2 µF or greater.

Pin Description: LD2980CM18TR Pin Definition and Functions
Pin Name Type Function
1 IN Power Input voltage (2.0–16V)
2 GND Power Ground
3 EN Input Enable (active high; tie to IN if unused)
4 BYP I/O Bypass capacitor for noise reduction (optional; leave open if unused)
5 OUT Power Regulated 1.8V output
Application Scenarios: In which products and applications is LD2980CM18TR used
  • Battery-powered devices: 150 mV dropout enables operation from a single Li-ion cell (3.0V end-of-life) down to 1.8V output with 100 mA load capability
  • Post-regulation in switchers: Low quiescent current (1.2 mA) and low noise make it ideal as a secondary regulator after a switching converter for noise-sensitive analog circuits
  • Portable electronics: SOT23-5L package minimizes PCB footprint in mobile phones, PDAs, and wearable devices requiring 1.8V logic supply
  • IoT sensor nodes: Enable pin allows microcontroller-controlled power gating for battery conservation in duty-cycled wireless sensor applications
Alternative Models: What chips are recommended as replacements for LD2980CM18TR
Manufacturer Part Number Package Notes
STMicroelectronics LD2980CM33TR SOT23-5L 3.3V output version
STMicroelectronics LD2980CM25TR SOT23-5L 2.5V output version
Texas Instruments TLV70018DQNT X2SON-4 1.8V, 200mA, smaller package
onsemi NCP511SN18T1G TSOP-5 1.8V, 80mA, low noise
Microchip MCP1824S-1802E/DB SOT223-3 1.8V, 300mA, higher current
Richtek RT9193-18GB SOT23-5 1.8V, 300mA, low noise

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1