Opens in a new tab

LESD5D5.0CT1G

5V bidirectional ESD protection TVS, SOD-523, LRC

17635

Effective Inventory

Image for reference only

Manufacturer Part:

LESD5D5.0CT1G

Package:

SOD-523 / SOT-523 (1.6 x 0.8 x 0.6mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LESD5D5.0CT1G is a bidirectional TVS/ESD protection diode from LRC (Leshan Radio) or similar manufacturer. Based on the part number convention, it provides 5.0V working voltage bidirectional ESD protection in a SOD-523 or SOT-523 package.

Key Specifications

  • Type: Bidirectional ESD Protection TVS Diode
  • Working Voltage (VRWM): 5.0V
  • Breakdown Voltage (VBR): Per specification
  • Clamping Voltage (VC): Per specification
  • Direction: Bidirectional
  • ESD Protection: IEC 61000-4-2
  • Capacitance: Low typical
  • Leakage Current: Low typical
  • Package: SOD-523 / SOT-523
  • Operating Temp: -55C to +125C
  • RoHS: Compliant

Features

  • Bidirectional protection for AC signal lines
  • 5.0V working voltage suitable for USB and general I/O
  • Compact SOD-523 package
  • Low capacitance for high-speed signal protection

Applications

  • USB port ESD protection
  • General I/O protection
  • High-speed data line protection
  • Mobile device ESD protection
Product Introduction: LESD5D5.0CT1G Product Introduction

The LESD5D5.0CT1G is a bidirectional ESD protection TVS diode with 5.0V working voltage in a compact SOD-523 package, suitable for USB and general I/O protection.

Working Principle: LESD5D5.0CT1G Working Principle

The bidirectional TVS diode contains two back-to-back Zener diodes. Under normal operating conditions (signal voltage within +/-5V), both diodes are reverse-biased and present high impedance. When a positive or negative ESD transient exceeds the breakdown voltage, the corresponding Zener diode avalanches and clamps the voltage to a safe level, shunting the ESD current to ground. The bidirectional configuration makes it suitable for protecting AC-coupled or bidirectional signal lines.

Pin Description: LESD5D5.0CT1G Pin Definition and Functions
Pin Name Function
1 I/O 1 Protected line terminal 1
2 I/O 2 Protected line terminal 2
Application Scenarios: In which products and applications is LESD5D5.0CT1G used
  • USB port ESD protection
  • General I/O protection
  • High-speed data line protection
  • Mobile device ESD protection
Alternative Models: What chips are recommended as replacements for LESD5D5.0CT1G
Model Manufacturer Key Spec Package
ESD5Z5.0T1G onsemi 5V bidirectional ESD SOD-523
PRTR5V0U2X NXP 5V ESD array SOT-143
PESD5V0S1BA Nexperia 5V bidirectional ESD SOD-323

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1