Opens in a new tab

LM1971MX/NOPB

Digital audio attenuator, 62dB range, 1dB steps, 0.0008% THD, SOIC-8

12438

Effective Inventory

Image for reference only

Manufacturer Part:

LM1971MX/NOPB

Package:

SOIC-8 (4.90 x 3.90 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LM1971MX/NOPB from Texas Instruments is a digitally-controlled 62 dB audio attenuator with mute function, featuring 0.0008% THD and 115 dB dynamic range for high-fidelity audio volume control.

Key Specifications

Manufacturer Texas Instruments
Channels 1
Resolution 8-bit (1 dB steps)
Attenuation Range 0 to -62 dB
Mute Attenuation 102 dB typical
Dynamic Range 115 dB typical
THD 0.0008% typical
Frequency Response >200 kHz (-3dB)
Interface 3-wire serial
Supply Voltage 4.5V to 12V
Package SOIC-8 (3.90mm wide)
Operating Temperature -40°C to +85°C

Features

  • Digital volume control with 1 dB steps
  • 62 dB attenuation range
  • Mute function: 102 dB attenuation
  • Ultra-low THD: 0.0008%
  • 115 dB dynamic range
  • Click-free level transitions
  • 3-wire serial interface (TTL/CMOS)

Applications

  • Professional audio mixing consoles
  • High-end consumer audio
  • Audio distribution systems
  • Broadcast equipment
Product Introduction: LM1971MX/NOPB Product Introduction

The LM1971MX/NOPB from Texas Instruments is a CMOS digitally-controlled single-channel audio attenuator providing 62 dB attenuation in 1 dB steps via a 3-wire serial interface. With ultra-low 0.0008% THD, 115 dB dynamic range, and click-free transitions, it delivers audiophile-grade volume control. The mute function provides 102 dB attenuation. Overture series design operates from 4.5V to 12V supply.

Working Principle: LM1971MX/NOPB Working Principle

The LM1971 uses a resistor ladder network with CMOS switches for precise attenuation in 1 dB steps. The 3-wire serial interface (data, clock, latch) loads the desired attenuation code. Zero-crossing detection synchronizes level changes to minimize audible artifacts. The mute function disconnects the input through a high-impedance path, providing over 100 dB isolation.

Pin Description: LM1971MX/NOPB Pin Definition and Functions
Pin Name Function
1 VDD Positive supply
2 GND Ground
3 DATA Serial data input
4 CLOCK Serial clock
5 LATCH Latch enable
6 MUTE Mute control
7 OUT Signal output
8 IN Signal input
Application Scenarios: In which products and applications is LM1971MX/NOPB used
  • Professional audio mixing consoles
  • High-end consumer preamplifiers
  • Audio distribution systems
  • Broadcast studio equipment
Alternative Models: What chips are recommended as replacements for LM1971MX/NOPB
Manufacturer Part Number Notes
TI LM1972MX/NOPB Dual-channel version
TI LM1973MX/NOPB Three-channel version

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1