Opens in a new tab

LM224N

Quad op-amp, 3-32V, 1.2MHz GBW, 700uA total, PDIP-14, -25 to 85C

9512

Effective Inventory

Image for reference only

Manufacturer Part:

LM224N

Package:

PDIP-14 (19.30 x 6.35 x 4.57 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LM224N from Texas Instruments is a military-grade quad operational amplifier in a 14-pin DIP package, featuring a wide supply range of 3 V to 32 V (or +/-1.5 V to +/-16 V), 1.2 MHz gain bandwidth, and operation from -25°C to +85°C. Each amplifier draws only 700 µA total supply current and provides true differential inputs with a common-mode range that includes ground.

Key Specifications

Number of Amplifiers 4
Supply Voltage Range 3 V to 32 V (single) or +/-1.5 V to +/-16 V
Gain Bandwidth Product 1.2 MHz
Slew Rate 0.5 V/µs
Input Offset Voltage 2 mV (typ)
Input Bias Current 45 nA (typ)
Supply Current (all 4 amps) 700 µA (typ at 5 V)
Large Signal Voltage Gain 100 dB
Operating Temperature -25°C to +85°C
Package PDIP-14

Features

  • Four independent op-amps in a single package
  • Input common-mode range includes ground (single-supply operation)
  • Output voltage swings to ground in single-supply mode
  • Internally frequency compensated for unity gain
  • Low supply current independent of supply voltage magnitude
  • Military temperature range: -25°C to +85°C

Applications

  • Transducer signal amplification
  • Active filters and oscillators
  • Comparators and level detectors
  • DC gain blocks and buffer amplifiers
  • Industrial control and instrumentation
Product Introduction: LM224N Product Introduction

The LM224N is a quad operational amplifier from Texas Instruments qualified for military temperature range operation from -25°C to +85°C. It consists of four independent, high-gain, internally compensated operational amplifiers designed to operate from a single supply over a wide range of 3 V to 32 V, or from dual supplies of +/-1.5 V to +/-16 V. Each amplifier features true differential inputs with a common-mode voltage range that includes ground, enabling true single-supply operation without external biasing. The output voltage can swing to ground while operating from a single positive supply. The total supply current for all four amplifiers is only 700 µA at 5 V and is essentially independent of the supply voltage magnitude. With 1.2 MHz gain bandwidth, 0.5 V/µs slew rate, and 100 dB large-signal voltage gain, the LM224N is suitable for a wide range of general-purpose amplification, filtering, and signal conditioning tasks. The PDIP-14 through-hole package enables easy prototyping and field service.

Working Principle: LM224N Working Principle

The LM224N uses a PNP input stage that allows the input common-mode voltage range to extend to ground (0 V) in single-supply operation. The PNP input transistors draw bias current out of the input pins (nominally 45 nA), which flows through external source resistance. Each amplifier consists of a differential input stage, a high-gain intermediate stage, and a Class AB output stage capable of sourcing 20 mA and sinking 10 mA. Internal compensation capacitors provide unity-gain stability without external components. The output stage includes active current limiting and can drive capacitive loads directly. In single-supply operation, the output transistor can pull down to within a few millivolts of ground, but cannot pull all the way to V+. The 1.2 MHz gain bandwidth product and 0.5 V/µs slew rate are set by the internal compensation capacitor and the input stage tail current, respectively.

Pin Description: LM224N Pin Definition and Functions
Pin Name Function
1 OUT 1 Amplifier 1 output
2 -IN 1 Amplifier 1 inverting input
3 +IN 1 Amplifier 1 non-inverting input
4 VCC Positive supply voltage
5 +IN 2 Amplifier 2 non-inverting input
6 -IN 2 Amplifier 2 inverting input
7 OUT 2 Amplifier 2 output
8 OUT 3 Amplifier 3 output
9 -IN 3 Amplifier 3 inverting input
10 +IN 3 Amplifier 3 non-inverting input
11 GND / V- Ground (single supply) or negative supply
12 +IN 4 Amplifier 4 non-inverting input
13 -IN 4 Amplifier 4 inverting input
14 OUT 4 Amplifier 4 output
Application Scenarios: In which products and applications is LM224N used
  • Transducer Amplification: Amplifying signals from sensors with ground-referenced outputs in single-supply systems
  • Active Filters: Low-pass, high-pass, and band-pass filter stages for signal conditioning
  • Level Detection: Window comparators and threshold detectors in industrial monitoring
  • DC Gain Blocks: General-purpose non-inverting and inverting amplifier configurations
  • Oscillators and Waveform Generators: Wien bridge and RC phase-shift oscillators for test signals
Alternative Models: What chips are recommended as replacements for LM224N
Model Manufacturer GBW VOS Iq/amp Package Notes
LM324N Texas Instruments 1.2 MHz 3 mV 175 µA PDIP-14 Commercial grade, same die
LM124N Texas Instruments 1.2 MHz 2 mV 175 µA PDIP-14 Military grade, -55 to 125C
MCP6004-I/P Microchip 1 MHz 3 mV 100 µA PDIP-14 RRIO, lower power
TLV274PWR Texas Instruments 3 MHz 0.5 mV 260 µA TSSOP-14 RRIO, higher BW
LM2902N Texas Instruments 1.2 MHz 2 mV 175 µA PDIP-14 Automotive grade, -40 to 125C

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1