Opens in a new tab

Home » DC-DC Converters, Integrated Circuits ICs » LM22670MRX-ADJ/NOPB

LM22670MRX-ADJ/NOPB

1A buck regulator, 4.5-42V in, adj out, 500kHz, integrated FET, HSOP-8

4890

Effective Inventory

Image for reference only

Manufacturer Part:

LM22670MRX-ADJ/NOPB

Package:

HSOP-8 with exposed pad (5.0 × 4.0 × 1.6 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LM22670MRX-ADJ/NOPB is a 1A step-down switching regulator from Texas Instruments with an input range of 4.5V to 42V. It features a 500kHz switching frequency, integrated 250mΩ N-channel MOSFET, and current-mode control. The ADJ variant provides adjustable output voltage from 1.285V to 40V. Packaged in an 8-pin HSOP (MRX) with exposed thermal pad for efficient heat dissipation.

Key Specifications

Function 1A Step-Down Switching Regulator
Input Voltage 4.5V to 42V
Output Voltage 1.285V to 40V (adjustable)
Output Current 1A
Switching Frequency 500kHz
MOSFET RDS(on) 250mΩ (integrated N-ch)
Control Mode Current-Mode PWM
Package 8-pin HSOP with exposed pad (5.0 × 4.0 mm)
Operating Temperature -40°C to +125°C (TJ)

Features

  • Wide 4.5V to 42V input voltage range
  • Integrated 250mΩ N-channel MOSFET for 1A output
  • 500kHz fixed switching frequency
  • Current-mode control for improved transient response
  • Internal soft start and thermal shutdown
  • Exposed thermal pad for low thermal resistance

Applications

  • Automotive battery-powered step-down converters
  • Industrial 24V bus point-of-load conversion
  • Telecom power supply regulation
  • Battery charger and power management
  • Distributed power architectures
Product Introduction: LM22670MRX-ADJ/NOPB Product Introduction

The LM22670 is a SIMPLE SWITCHER step-down voltage regulator with an integrated 250mΩ N-channel MOSFET, capable of delivering 1A from a wide 4.5V to 42V input. The adjustable version allows output voltage setting from 1.285V to 40V via an external resistor divider. Current-mode control architecture provides excellent line and load transient response with simplified compensation. The 500kHz switching frequency keeps external inductor and capacitor sizes small, and the exposed-pad HSOP package ensures efficient thermal performance. The device includes internal soft start, thermal shutdown, and current limit protection for robust operation in harsh environments.

Working Principle: LM22670MRX-ADJ/NOPB Working Principle

The LM22670 uses a fixed-frequency current-mode PWM control architecture. The internal oscillator generates a 500kHz clock that sets the switching frequency. On each clock cycle, the integrated N-channel MOSFET turns on and current through the external inductor ramps up. The inductor current is sensed and compared to the error amplifier output; when the current reaches the threshold, the MOSFET turns off and the external Schottky diode conducts during the off-time. The error amplifier compares the FB pin voltage (from the output resistor divider) with the 1.285V internal reference and adjusts the current threshold to regulate the output voltage. The current-mode architecture inherently provides cycle-by-cycle current limiting and simplifies loop compensation compared to voltage-mode control.

Pin Description: LM22670MRX-ADJ/NOPB Pin Definition and Functions
Pin Name Type Function
1 VIN Power Input supply voltage (4.5-42V)
2 SW Output Switch node — connect to inductor and diode
3 BOOT I/O Bootstrap capacitor — connect to SW through cap
4 NC — No connect
5 FB Input Feedback — connect resistor divider from output
6 EN Input Enable — high enables operation
7 COMP Output Compensation — connect RC network to GND
8 GND Power Ground and thermal pad
Application Scenarios: In which products and applications is LM22670MRX-ADJ/NOPB used
  • 12V/24V automotive battery to 5V/3.3V step-down conversion
  • Industrial 24V bus to 12V intermediate rail
  • Telecom -48V (via pre-regulator) to logic supply
  • 42V industrial supply to sensor and controller rails
  • Battery-powered equipment high-voltage step-down
Alternative Models: What chips are recommended as replacements for LM22670MRX-ADJ/NOPB
Manufacturer Part Number Package Notes
TI LM22671MRX-ADJ/NOPB HSOP-8 500mA version, same family
TI LMR14050 VQFN-16 5A, 40V input buck
Monolithic Power MP8759 QFN-16 5A buck, 36V input
Richtek RT6200 SOT-23-6 1A buck, 36V input
Infineon TLE6389 PG-DSO-8 Automotive buck, 40V

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1