Opens in a new tab

LM25005MHX/NOPB

42 V, 2.5 A step-down regulator, 7–42 V input, integrated MOSFET, 20-HTSSOP

12608

Effective Inventory

Image for reference only

Manufacturer Part:

LM25005MHX/NOPB

Package:

20-HTSSOP (PWP) with exposed pad

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LM25005MHX/NOPB is a 42 V, 2.5 A step-down switching regulator from Texas Instruments with an integrated 160 mΩ N-channel MOSFET. Packaged in a 20-pin HTSSOP (PWP) with exposed pad, it operates from 7 V to 42 V input and provides an adjustable output down to 1.225 V. The current mode control with emulated inductor current ramp enables reliable operation at very small duty cycles.

Key Specifications

Topology Step-Down (Buck) with Integrated MOSFET
Input Voltage Range 7 V to 42 V
Output Current 2.5 A
Output Voltage Adjustable from 1.225 V
Switching Frequency 50 kHz to 500 kHz (adjustable)
MOSFET RDS(on) 160 mΩ typical
Package 20-HTSSOP (PWP) — exposed pad
Operating Temperature -40°C to +125°C

Features

  • Integrated 42 V, 160 mΩ N-channel MOSFET for minimal external components
  • Ultra-wide 7 V to 42 V input voltage range
  • Emulated current mode control for reliable small duty cycle operation
  • Adjustable switching frequency from 50 kHz to 500 kHz Programmable soft-start and shutdown/standby input

Applications

  • Industrial 24 V and 48 V power systems
  • Automotive battery-powered DC-DC conversion
  • Distributed power architectures
  • LED driver and lighting power supplies
  • Telecom and base station power
Product Introduction: LM25005MHX/NOPB Product Introduction

The LM25005 is a step-down switching regulator from Texas Instruments featuring all functions necessary for an efficient high-voltage buck regulator with minimum external components. It integrates a 42 V, 160 mΩ N-channel MOSFET with 2.5 A output capability. The current mode control uses an emulated current ramp for reliable operation at very small duty cycles common in high input voltage applications. The switching frequency is programmable from 50 kHz to 500 kHz via a single resistor, and an oscillator sync pin allows multiple devices to synchronize.

Working Principle: LM25005MHX/NOPB Working Principle

The LM25005 uses peak current mode control with an emulated inductor current ramp. The emulated ramp is synthesized from the input voltage and duty cycle, providing noise immunity superior to traditional current mode designs. The internal MOSFET switches the input voltage to the inductor, and the catch diode provides the freewheeling path during off-time. The feedback voltage (1.225 V reference) is compared against the output by the error amplifier, which controls the PWM comparator. The internal VCC regulator provides a 7.15 V bias rail from the high-voltage input, and transitions to LDO mode when the input drops below 9 V. Cycle-by-cycle current limiting protects the MOSFET during overload.

Pin Description: LM25005MHX/NOPB Pin Definition and Functions
Pin Name Type Function
1 VIN Input Input supply (7–42 V)
2 BST I/O Bootstrap capacitor for high-side drive
3 SW Output Switch node (to inductor and diode)
4 SD Input Shutdown / standby control
5 SYNC Input Oscillator synchronization input
6 SS I/O Soft-start capacitor
7 RAMP I/O Emulated ramp capacitor
8 RT I/O Frequency set resistor
9 FB Input Output voltage feedback (1.225 V ref)
10 COMP I/O Error amplifier output / compensation
11 VCC Output Internal regulator output (7.15 V)
12 PRE Output Pre-charge output for bootstrap
13–20 GND/PGND Power Ground / power ground
Application Scenarios: In which products and applications is LM25005MHX/NOPB used
  • 24 V industrial bus to 5 V / 3.3 V logic conversion
  • Automotive 12 V battery to point-of-load regulation
  • 48 V telecom bus power conversion
  • LED driver front-end buck stage
  • Distributed power architecture intermediate bus
Alternative Models: What chips are recommended as replacements for LM25005MHX/NOPB
Manufacturer Part Number Package Notes
TI LM25005MH/NOPB 20-HTSSOP Same device, tube packaging
TI LM25010MHX/NOPB 14-HTSSOP 2.5 A, 42 V, fewer pins
Monolithic Power MP8759GD-Z SOIC-8EP 4 A, 60 V buck, integrated
Analog Devices LT8631EFE#PBF 28-TSSOP 5 A, 100 V, sync buck
Infineon ILD6150 PG-DSO-8 1.5 A, 60 V buck

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1