Opens in a new tab

LM2595S-5.0/TR

Step-down converter, 1A, SIMPLE SWITCHER, 4.5-40V input, 150kHz

13865

Effective Inventory

Image for reference only

Manufacturer Part:

LM2595S-5.0/TR

Package:

See datasheet

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

LM2595S-5.0/TR is a 1A step-down switching voltage regulator with 5.0V fixed output, 150kHz switching frequency, TO-263 package, tape and reel.

Key Specifications

Output Current 1 A
Output Voltage 5.0V fixed
Input Voltage 4.5V to 40V
Switching Frequency 150 kHz
Efficiency Up to 90%
Package TO-263 (D²PAK)
Packaging Tape and Reel

Features

  • 1A output current
  • Fixed 5.0V output
  • 150kHz fixed switching frequency
  • High efficiency up to 90%
  • TO-263 surface-mount package

Applications

Refer to manufacturer datasheet for detailed application information and design guidelines.

Product Introduction: LM2595S-5.0/TR Product Introduction

LM2595S-5.0/TR is a 1A step-down switching voltage regulator with 5.0V fixed output, 150kHz switching frequency, TO-263 package, tape and reel.

Working Principle: LM2595S-5.0/TR Working Principle

The LM2595S-5.0/TR is a Texas Instruments interface or analog IC providing signal conditioning, level translation, or protocol conversion between system domains. The internal architecture uses precision analog circuitry (bandgap references, op-amps, comparators) combined with digital logic for configuration and control. The device supports standard communication protocols and voltage levels, enabling interoperability between mixed-voltage system components.

Pin Description: LM2595S-5.0/TR Pin Definition and Functions
Pin Group Name Description
I/O Signal pins Primary signal interface pins
Power VCC/VDD Supply voltage pins
Ground GND/VSS Ground reference pins
Control EN, RST, CS Enable, reset, and chip select controls
Application Scenarios: In which products and applications is LM2595S-5.0/TR used
  • Multi-voltage I2C/SPI bus extension
  • Sensor signal conditioning
  • Protocol conversion
  • Hot-swap and power sequencing
Alternative Models: What chips are recommended as replacements for LM2595S-5.0/TR
Model Manufacturer Key Difference
NCV4275 ON Semi Equivalent LDO function
AP2112 Diodes Inc Low-cost LDO alternative

Recommend Parts

ISL95855HRTZ-T

IMVP8 3+2+1 phase buck controller, R3 technology, 4.5-25V input, 48-TQFN

Brand: Renesas

Package: 48-TQFN (6×6 mm, exposed pad)

IN STOCK: 2156pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4019PBF

150V N-Channel HEXFET Power MOSFET, 47A, 34 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 2409pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSP430F247TPMR

TI MSP430 MCU, 16-bit RISC, 92KB Flash, 8KB RAM, 16MHz, LQFP-64

Package: See datasheet

IN STOCK: 13371pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1