Opens in a new tab

LM2902PT

Quad op-amp, 1.1MHz GBW, automotive grade, -40~125C, 32V supply

7220

Effective Inventory

Image for reference only

Manufacturer Part:

LM2902PT

Package:

See datasheet

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

LM2902PT is an automotive-qualified quad op amp with 1.1MHz GBWP, 3V to 32V supply, TSSOP-14 package.

Key Specifications

GBWP 1.1 MHz
Slew Rate 0.5 V/µs
Supply Voltage 3V to 26V
Input Offset Voltage ±3 mV
Package TSSOP-14
Qualification AEC-Q100 automotive

Features

  • AEC-Q100 automotive qualified
  • Quad op amp in single package
  • 1.1MHz gain bandwidth product
  • TSSOP-14 compact package
  • Wide 3V to 26V supply range

Applications

Refer to manufacturer datasheet for detailed application information and design guidelines.

Product Introduction: LM2902PT Product Introduction

LM2902PT is an automotive-qualified quad op amp with 1.1MHz GBWP, 3V to 32V supply, TSSOP-14 package.

Working Principle: LM2902PT Working Principle

The LM2902PT is a Texas Instruments interface or analog IC providing signal conditioning, level translation, or protocol conversion between system domains. The internal architecture uses precision analog circuitry (bandgap references, op-amps, comparators) combined with digital logic for configuration and control. The device supports standard communication protocols and voltage levels, enabling interoperability between mixed-voltage system components.

Pin Description: LM2902PT Pin Definition and Functions
Pin Group Name Description
I/O Signal pins Primary signal interface pins
Power VCC/VDD Supply voltage pins
Ground GND/VSS Ground reference pins
Control EN, RST, CS Enable, reset, and chip select controls
Application Scenarios: In which products and applications is LM2902PT used
  • Multi-voltage I2C/SPI bus extension
  • Sensor signal conditioning
  • Protocol conversion
  • Hot-swap and power sequencing
Alternative Models: What chips are recommended as replacements for LM2902PT
Model Manufacturer Key Difference
NCV4275 ON Semi Equivalent LDO function
AP2112 Diodes Inc Low-cost LDO alternative

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1