Opens in a new tab

LM293DR

Dual Diff Comparator, 2-36V, 1mV Vos, 1.3us, Open-Collector, SOIC-8

21345

Effective Inventory

Image for reference only

Manufacturer Part:

LM293DR

Package:

SOIC-8 (4.9 x 3.9 x 1.5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LM293DR from Texas Instruments is a dual differential comparator with low input offset voltage, operating from single 2V to 36V or dual +/-1V to +/-18V supplies in an SOIC-8 package.

Key Specifications

Type Dual Differential Comparator
Channels 2
Supply Voltage 2 V to 36 V (single) or +/-1 V to +/-18 V
Input Offset Voltage 1 mV (typical)
Response Time 1.3 us (typical)
Input Bias Current 25 nA (typical)
Output Current 16 mA (sink)
Package SOIC-8
Operating Temperature -25C to +85C

Features

  • Wide 2 V to 36 V single supply range
  • Low 1 mV typical input offset voltage
  • Fast 1.3 us response time
  • Open-collector outputs for wire-OR
  • Input common-mode range includes ground
  • Low input bias current (25 nA typical)

Applications

  • Zero-crossing detection
  • Voltage level comparison and monitoring
  • Oscillator and timing circuits
  • Window comparators and threshold detectors
Product Introduction: LM293DR Product Introduction

The LM293DR from Texas Instruments is a dual differential comparator designed for operation from a single 2 V to 36 V supply or dual +/-1 V to +/-18 V supplies. The device features low 1 mV typical input offset voltage and fast 1.3 us response time, making it suitable for precision voltage comparison applications. The open-collector outputs allow wire-OR connection and interface with logic families from 5 V to 36 V. The input common-mode voltage range includes ground, enabling single-supply operation without level shifting. The LM293 is the industrial temperature grade of the popular LM393/LM293/LM393 family.

Working Principle: LM293DR Working Principle

The LM293DR contains two independent voltage comparators. Each comparator has inverting (-) and non-inverting (+) inputs and an open-collector output. When the voltage at the non-inverting input exceeds the voltage at the inverting input, the output transistor turns off, and the output goes HIGH (determined by the external pull-up resistor). When the inverting input voltage exceeds the non-inverting input, the output transistor turns on, pulling the output LOW. The open-collector output configuration allows the output to sink up to 16 mA and enables wire-OR connections where multiple comparator outputs share a single pull-up resistor. The input stage uses PNP transistors, allowing the common-mode input range to extend to ground (0 V) for single-supply operation.

Pin Description: LM293DR Pin Definition and Functions
Pin Name Type Function
1 1OUT Output Comparator 1 output (open-collector)
2 1IN- Input Comparator 1 inverting input
3 1IN+ Input Comparator 1 non-inverting input
4 GND Power Ground / negative supply
5 2IN+ Input Comparator 2 non-inverting input
6 2IN- Input Comparator 2 inverting input
7 2OUT Output Comparator 2 output (open-collector)
8 V+ Power Positive supply (2-36V)
Application Scenarios: In which products and applications is LM293DR used
  • AC zero-crossing detector for TRIAC phase control
  • Battery low-voltage monitoring with hysteresis
  • Window comparator for over/under voltage protection
  • Relaxation oscillator for LED flasher circuits
Alternative Models: What chips are recommended as replacements for LM293DR
Manufacturer Part Number Package Notes
TI LM393DR SOIC-8 0-70C commercial grade
TI LM2903DR SOIC-8 Automotive grade, same family
ST LM293DT SOIC-8 Pin-compatible equivalent
onsemi LM293DR2G SOIC-8 Pin-compatible equivalent
Microchip MCP6541T-I/SN SOIC-8 CMOS, push-pull, lower power

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1