Opens in a new tab

LM3000SQ/NOPB

Dual sync buck controller, 3.3–18.5 V, 20 A/ch, emulated current mode, 32-WQFN

12462

Effective Inventory

Image for reference only

Manufacturer Part:

LM3000SQ/NOPB

Package:

32-WQFN (RTV) — 5.0 x 5.0 mm

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LM3000SQ/NOPB is a dual synchronous buck controller from Texas Instruments with an input range of 3.3 V to 18.5 V. Packaged in a 32-pin WQFN (RTV), it uses emulated current mode control with bottom-side FET sensing for fast transient response and current limiting without external sense resistors. The two outputs operate 180° out of phase for reduced input capacitor requirements.

Key Specifications

Topology Dual Synchronous Buck Controller
Input Voltage Range 3.3 V to 18.5 V
Output Voltage Range 0.6 V to 80% of VIN
Max Output Current 20 A per channel (external MOSFETs)
Switching Frequency 200 kHz to 1.5 MHz (adjustable)
Package 32-WQFN (RTV) — 5.0 x 5.0 mm
Operating Temperature -40°C to +125°C
FB Accuracy 1%

Features

  • Emulated current mode control with bottom-side FET current sensing
  • 180° out-of-phase operation reduces input capacitance
  • Independent enable, soft-start, and track for each output
  • Remote differential output voltage sensing
  • Hiccup mode short-circuit protection

Applications

  • DC power distribution systems
  • Graphics card GPU and memory power
  • FPGA, CPLD, and ASIC core supplies
  • Embedded processor I/O supplies
  • Networking equipment routers and switches
Product Introduction: LM3000SQ/NOPB Product Introduction

The LM3000 is a dual output synchronous buck controller from Texas Instruments designed to convert input voltages from 3.3 V to 18.5 V down to output voltages as low as 0.6 V. The two outputs switch at a programmable frequency of 200 kHz to 1.5 MHz, with the second output 180° out of phase to minimize input filter requirements. The emulated current-mode control uses bottom-side FET sensing for fast transient response and current limit without external sense resistors. Separate enable, soft-start, and track pins allow independent control for flexible power sequencing.

Working Principle: LM3000SQ/NOPB Working Principle

The LM3000 uses an emulated current-mode control architecture that synthesizes the inductor current ramp internally. The bottom-side MOSFET RDS(on) is sensed during the off-time to reconstruct the inductor current, eliminating external sense resistors. The error amplifier compares the differential output voltage (sensed remotely) against a 0.6 V reference with 1% accuracy. The PWM comparator generates the gate drive timing. The two channels operate 180° out of phase, effectively doubling the input ripple frequency. A CLKOUT pin provides a 90° phase-shifted clock for daisy-chaining multiple LM3000 devices. Protection features include UVLO, power good, over-voltage crowbar, and hiccup mode short-circuit protection.

Pin Description: LM3000SQ/NOPB Pin Definition and Functions
Pin Name Type Function
1 VDD Output Internal 5 V regulator output
2 EN1 Input Channel 1 enable
3 SS1 I/O Channel 1 soft-start capacitor
4 TRK1 Input Channel 1 tracking input
5 ILIM1 Input Channel 1 current limit set
6 FB1 Input Channel 1 feedback (diff +)
7 CMP1 I/O Channel 1 compensation
8 VIN Input Input supply (3.3–18.5 V)
9 SW1 I/O Channel 1 switch node
10 HO1 Output Channel 1 high-side gate drive
11 LO1 Output Channel 1 low-side gate drive
12 PGND1 Power Channel 1 power ground
13–16 Ch2 pins Mixed Channel 2 mirrors Ch1
17 PGOOD2 Output Channel 2 power good
18 PGOOD1 Output Channel 1 power good
Application Scenarios: In which products and applications is LM3000SQ/NOPB used
  • 12 V to point-of-load conversion for GPU and memory
  • FPGA core and I/O dual-rail power generation
  • Networking equipment dual-output DC-DC conversion
  • 5 V / 12 V industrial power distribution
  • Embedded processor core and DDR supply
Alternative Models: What chips are recommended as replacements for LM3000SQ/NOPB
Manufacturer Part Number Package Notes
TI LM3150MHX/NOPB 20-HTSSOP Single sync buck controller, similar range
TI LM5141RHBR 28-TSSOP Single 100 V sync buck controller
Analog Devices LT3718EUH#PBF 32-QFN Dual step-down controller
Infineon IR3651STRPBF 28-TSSOP Dual step-down controller
Richtek RT8859MGS 32-VQFN Dual step-down controller

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1