Opens in a new tab

LM317LIDR

Adj LDO, 100mA, 1.25-37V, SOIC-8, -40~125C

4567

Effective Inventory

Image for reference only

Manufacturer Part:

LM317LIDR

Package:

SOIC-8 (4.9 x 3.9 x 1.5 mm, 1.27mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LM317LIDR from Texas Instruments is a 100mA adjustable linear voltage regulator with 1.25V to 37V output range, SOIC-8 package, and industrial temperature range.

Key Specifications

Type 100mA Adjustable Positive Voltage Regulator
Output Voltage Range 1.25V to 37V (adjustable)
Output Current 100 mA (max)
Input Voltage Range 3.75V to 40V
Dropout Voltage 2.0 V (typical)
Line Regulation 0.01% / V (typical)
Load Regulation 0.5% (typical)
Quiescent Current (IADJ) 50 uA (typical)
Ripple Rejection 80 dB @ 120Hz; 65 dB @ 100kHz
Package SOIC-8 (D suffix)
Operating Temperature -40C to +125C (I grade)

Features

  • Adjustable output from 1.25V to 37V with two resistors
  • 100mA output current capability
  • 0.01%/V typical line regulation
  • 80 dB ripple rejection at 120Hz
  • Internal current limiting and thermal shutdown
  • SOIC-8 surface-mount package

Applications

  • Low-current voltage regulation
  • Reference voltage generation
  • Bias supply for op-amps and comparators
  • Adjustable current source
Product Introduction: LM317LIDR Product Introduction

The LM317LIDR from Texas Instruments is the 100mA version of the industry-standard LM317 adjustable voltage regulator in an SOIC-8 surface-mount package. The device provides an adjustable output voltage from 1.25V to 37V using only two external resistors. The I suffix indicates the industrial temperature range of -40C to +125C. The D suffix indicates the SOIC-8 package, and R indicates tape and reel packaging. The LM317L is ideal for low-current applications such as op-amp bias supplies, reference voltage generation, and programmable voltage sources. The 0.01%/V typical line regulation ensures a stable output even with varying input voltage. The 80 dB ripple rejection at 120Hz can be improved further by adding a bypass capacitor from the ADJ pin to ground. The internal current limiting and thermal shutdown protect the device from fault conditions. For higher current requirements, the LM317M (500mA) and LM317 (1.5A) are available in compatible circuit configurations.

Working Principle: LM317LIDR Working Principle

The LM317LIDR maintains a constant 1.25V reference between the OUTPUT and ADJ pins. The output voltage is set by the ratio of two external resistors: VOUT = 1.25V x (1 + R2/R1) + IADJ x R2, where IADJ is typically 50uA. The error amplifier compares the voltage between OUT and ADJ with the internal 1.25V reference and adjusts the NPN Darlington pass transistor to maintain regulation. The ADJ pin current of 50uA is constant over line and load variations, making the error term IADJ x R2 negligible when R2 is small. To improve ripple rejection, a capacitor (CADJ) can be connected from the ADJ pin to ground, AC-bypassing the resistor divider and preventing ripple from being amplified by the R2/R1 ratio. The internal current limiting circuit monitors the output current and reduces the pass transistor drive when the current exceeds approximately 200mA. The thermal shutdown circuit monitors the junction temperature and shuts down the pass transistor when it exceeds approximately 165C. The minimum load current of 1.5mA (typical) must be drawn to maintain regulation, which is satisfied when R1 is less than 1.25V / 1.5mA = 833 Ohm (typically 120 Ohm is used).

Pin Description: LM317LIDR Pin Definition and Functions
Pin Name Type Function
1 ADJ Input Adjustment terminal (1.25V reference from OUT)
2 OUT Output Regulated voltage output
3 IN Power Input voltage (3.75V-40V)
4-8 NC – No connect (SOIC-8 has 5 active pins, 3 NC)
Application Scenarios: In which products and applications is LM317LIDR used
  • 3.3V to 1.8V op-amp bias supply with LM317L and 1% resistors for precise 1.80V output
  • Adjustable 2.5V-5.0V reference generator with LM317L and potentiometer for calibration
  • Constant current source for LED bias: IOUT = 1.25V / RSET with ADJ pin grounded through RSET
Alternative Models: What chips are recommended as replacements for LM317LIDR
Manufacturer Part Number Package Notes
TI LM317LDREG4 SOT-223-4 Smaller package, same function
onsemi LM317LZ TO-92 Through-hole version
ST LM317LZ TO-92 Through-hole, compatible
TI LM317MDT TO-252 500mA version, DPAK
Diodes Inc AP2112K-3.3 SOT-23-5 3.3V fixed LDO, lower dropout

Recommend Parts

MSP432P401RIPZR

Ultra-low-power Cortex-M4F MCU, 48MHz, 256KB Flash, 14-bit ADC, 850nA standby, 100-LQFP

Brand: TI

Package: 100-LQFP (14 x 14 x 1.4mm)

IN STOCK: 3750pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PTN78060WAH

4.5A positive-input buck-IT module, adjustable, SMD module

Brand: TI

Package: Module (34.3 x 19.3 x 8.2 mm)

IN STOCK: 4786pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC16F1526-I/PT

8-bit PIC16 MCU, 14KB Flash, 768B RAM, 30-ch 10-bit ADC, 10x CCP, 64-TQFP, XLP

Brand: MICROCHIP

Package: TQFP-64 (10.0 x 10.0 x 1.05 mm)

IN STOCK: 5600pcs

Cargo cycle: 3-7 Days

The minimum order is 1

R2A20178NP

8-channel 8-bit voltage output DAC, R-2R architecture, buffered rail-to-rail output, SPI interface up to 25MHz, 2.7-5.5V

Brand: Renesas

Package: 24-pin HWQFN (4x4x0.75mm)

IN STOCK: 6399pcs

Cargo cycle: 3-7 Days

The minimum order is 1

VS-40CPQ100-N3

Dual Schottky rectifier, common cathode, 2x20A, 100V, 0.61V VF, TO-247AC-3L, Vishay Q-series, 175 degC TJ, guard ring

Brand: VISHAY

Package: TO-247AC 3L (3-lead through-hole, 15.5mm width, tab for heatsink, common cathode configuration)

IN STOCK: 8950pcs

Cargo cycle: 3-7 Days

The minimum order is 1

BSC040N10NS5

OptiMOS 5 N-ch 100V 4mΩ 136A MOSFET, SuperSO8

Brand: infineon

Package: PG-TDSON-8 (SuperSO8, 5 x 6mm)

IN STOCK: 10509pcs

Cargo cycle: 3-7 Days

The minimum order is 1