Opens in a new tab

LM336Z-2.5

2.5V shunt reference, 0.2Ohm Zout, 400uA-10mA, TO-92

11810

Effective Inventory

Image for reference only

Manufacturer Part:

LM336Z-2.5

Package:

TO-92 (5.2 x 3.7 mm, through-hole)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LM336Z-2.5 from Texas Instruments (originally National Semiconductor) is a precision 2.5V shunt voltage reference diode in a TO-92 through-hole package. With 0.2Ohm dynamic impedance, 400uA to 10mA operating current range, and adjustable temperature coefficient via a third terminal, it provides a stable 2.5V reference for 5V logic systems.

Key Specifications

Reference Voltage 2.49V (typical)
Initial Accuracy +/-4% (standard), +/-1% (B grade)
Dynamic Impedance 0.2 Ohm (typical)
Operating Current Range 400 uA to 10 mA
Temperature Coefficient Adjustable via ADJ pin
Temperature Stability 6 mV typical (over 0-70C)
Operating Temperature 0 to +70 C
Package TO-92 (3-pin)

Features

  • Precision 2.5V shunt reference diode
  • 0.2Ohm low dynamic impedance
  • 400uA to 10mA wide operating current range
  • +/-1% initial tolerance available (B grade)
  • Adjustable temperature coefficient via ADJ pin
  • Fast turn-on time
  • Operates as positive or negative reference
  • TO-92 through-hole package
  • Convenient 2.5V reference from 5V supplies

Applications

  • Reference for 5V logic systems
  • 8-bit A/D and D/A converter reference
  • Digital voltmeters
  • Power supply monitoring
Product Introduction: LM336Z-2.5 Product Introduction

The LM336Z-2.5 from Texas Instruments is a precision 2.5V shunt voltage reference diode in a 3-pin TO-92 through-hole package. The Z suffix denotes the TO-92 package and the -2.5 indicates the nominal reference voltage. Operating as a low-temperature-coefficient 2.5V Zener diode with 0.2Ohm dynamic impedance, it provides a stable reference voltage over a wide operating current range of 400uA to 10mA. A third terminal (ADJ) allows the reference voltage and temperature coefficient to be trimmed for minimum drift using an external resistor and diode network. The 2.5V output makes it particularly convenient as a reference for 5V logic-powered systems, since it is exactly half of the 5V supply rail. The LM336-2.5 operates from 0 to +70C, while the LM236-2.5 extends to +85C and the LM136-2.5 to +125C.

Working Principle: LM336Z-2.5 Working Principle

The LM336Z-2.5 operates as a precision shunt regulator through three terminal functions: (1) Anode-Cathode Path: The device operates as a shunt regulator, similar to a Zener diode but with much better regulation characteristics. Current flows from cathode to anode (reverse bias), and the device maintains approximately 2.49V across these terminals. The 0.2Ohm dynamic impedance means the voltage changes only 0.2V for a 1A change in operating current, which is far superior to a standard 2.5V Zener diode. (2) Adjust (ADJ) Terminal: The third terminal provides access to an internal node that allows trimming of both the output voltage and the temperature coefficient. By connecting a resistor network (typically a 10kOhm potentiometer and a silicon diode) between the ADJ pin and the circuit, the output can be adjusted to exactly 2.490V with minimum temperature drift. (3) Bandgap Reference: The internal circuit uses a bandgap reference architecture, which provides the low temperature coefficient that is difficult to achieve with simple Zener diodes at low voltages. The bandgap circuit compensates for the negative temperature coefficient of the transistor VBE with the positive temperature coefficient of a PTAT (Proportional To Absolute Temperature) voltage.

Pin Description: LM336Z-2.5 Pin Definition and Functions
Pin Name Type Description
1 ADJ Input Adjustment terminal (for tempco trimming)
2 ANODE Power Anode (normally connected to ground)
3 CATHODE I/O Cathode (shunt current / reference output)
Application Scenarios: In which products and applications is LM336Z-2.5 used
  • 5V logic system reference with 2.5V = VCC/2 for A/D converter reference voltage
  • 8-bit DAC reference with 0.2Ohm dynamic impedance providing stable output under load
  • Digital voltmeter reference with ADJ pin trimming to 2.490V for minimum temperature drift
  • Power supply overvoltage monitor comparing scaled supply voltage against 2.5V reference
Alternative Models: What chips are recommended as replacements for LM336Z-2.5
Model Manufacturer Vref Accuracy Notes
LM336BZ-2.5 TI 2.49V +/-1% B grade, higher accuracy
TL431IDBVR TI 2.495-36V +/-2% Adjustable output
REF3025AIDBZR TI 2.5V +/-0.2% Series reference, higher accuracy
LT1009CS8 ADI 2.5V +/-0.2% Precision 2.5V reference

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1