Opens in a new tab

LM3525MX-H/NOPB

Dual USB power switch, 500mA/port, current-limit, fault-flag, USB 2.0

10022

Effective Inventory

Image for reference only

Manufacturer Part:

LM3525MX-H/NOPB

Package:

See datasheet

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

LM3525MX-H is a dual USB power switch with independent enable, 500mA per channel, overcurrent protection, SOIC-8 package.

Key Specifications

Function Dual USB power switch
Output Current 500 mA per channel
Input Voltage 2.7V to 5.5V
RON 70 mΩ
Overcurrent 1.1A trip point
Package SOIC-8
Channels 2

Features

  • Dual independent USB power switches
  • 500mA current limit per channel
  • 70mΩ low on-resistance
  • Overcurrent and thermal shutdown
  • Fault flag output for status reporting

Applications

Refer to manufacturer datasheet for detailed application information and design guidelines.

Product Introduction: LM3525MX-H/NOPB Product Introduction

LM3525MX-H is a dual USB power switch with independent enable, 500mA per channel, overcurrent protection, SOIC-8 package.

Working Principle: LM3525MX-H/NOPB Working Principle

The LM3525MX-H/NOPB is a Texas Instruments interface or analog IC providing signal conditioning, level translation, or protocol conversion between system domains. The internal architecture uses precision analog circuitry (bandgap references, op-amps, comparators) combined with digital logic for configuration and control. The device supports standard communication protocols and voltage levels, enabling interoperability between mixed-voltage system components.

Pin Description: LM3525MX-H/NOPB Pin Definition and Functions
Pin Group Name Description
I/O Signal pins Primary signal interface pins
Power VCC/VDD Supply voltage pins
Ground GND/VSS Ground reference pins
Control EN, RST, CS Enable, reset, and chip select controls
Application Scenarios: In which products and applications is LM3525MX-H/NOPB used
  • Multi-voltage I2C/SPI bus extension
  • Sensor signal conditioning
  • Protocol conversion
  • Hot-swap and power sequencing
Alternative Models: What chips are recommended as replacements for LM3525MX-H/NOPB
Model Manufacturer Key Difference
NCV4275 ON Semi Equivalent LDO function
AP2112 Diodes Inc Low-cost LDO alternative

Recommend Parts

ISL95855HRTZ-T

IMVP8 3+2+1 phase buck controller, R3 technology, 4.5-25V input, 48-TQFN

Brand: Renesas

Package: 48-TQFN (6×6 mm, exposed pad)

IN STOCK: 2156pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4019PBF

150V N-Channel HEXFET Power MOSFET, 47A, 34 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 2409pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1