Opens in a new tab

LM358BAIDR

Dual 36V op amp, 2mV Vos, 1.2MHz, EMI filter, SOIC-8

25000

Effective Inventory

Image for reference only

Manufacturer Part:

LM358BAIDR

Package:

8-Pin SOIC (4.9 x 3.9 x 1.5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LM358BAIDR is a Texas Instruments industry-standard dual op amp with 36V supply, 2mV max offset, 1.2MHz GBW, 300uA/ch IQ, integrated EMI filter, and ground-referenced input range. Packaged in SOIC-8, -40C to +85C.

Key Specifications

Channels 2 (dual)
Supply 3 V to 36 V
Vos 2 mV max (BA grade)
GBW 1.2 MHz
IQ 300 uA per channel
ESD 2 kV HBM

Features

  • 3V to 36V wide supply range
  • 2mV max offset voltage (BA grade)
  • 1.2MHz gain bandwidth
  • 300uA per channel quiescent current
  • Input range includes ground
  • Integrated EMI/RF filter
  • 2kV HBM ESD protection

Applications

  • Cost-sensitive signal conditioning
  • Power supply monitoring
  • Motor control feedback
  • Consumer and white goods
Product Introduction: LM358BAIDR Product Introduction

The LM358BAIDR is a Texas Instruments next-generation industry-standard dual operational amplifier in an 8-pin SOIC package. The BA grade provides 2mV maximum input offset voltage at 25C, a significant improvement over the original LM358 (7mV), while maintaining full pin and function compatibility. The 3V to 36V supply range supports operation from single-cell Li-Ion to 24V industrial rails. The input common-mode voltage range includes ground, enabling direct sensing of near-ground signals without biasing – a critical feature for current-sense and low-side measurement applications. The 1.2MHz GBW and 0.5V/us slew rate provide adequate bandwidth for general-purpose signal conditioning. The integrated EMI and RF rejection filter reduces the susceptibility to electromagnetic interference in noisy industrial environments, a feature absent in the original LM358. The 300uA per-channel quiescent current is lower than the original (350uA), reducing power consumption in battery-powered and always-on circuits. The 2kV HBM ESD rating improves robustness over the original 500V. The bipolar input architecture provides low 1/f noise for DC and low-frequency applications. Packaged in SOIC-8 rated for -40C to +85C.

Working Principle: LM358BAIDR Working Principle

The LM358BA uses a classical bipolar input stage with PNP differential pair. The PNP input transistors allow the input common-mode range to extend to ground (V-), since the input bias current flows out of the input pins through external resistors to ground. The input stage drives a gain stage with 1.2MHz dominant-pole compensation. The class-AB output stage can source 40mA and sink 60mA, with current limiting for fault protection. The integrated EMI filter consists of an RC low-pass network at the input stage that attenuates high-frequency RF signals before they can rectify and create DC offset errors. The 300uA per-channel bias current is set by an internal current reference. The BA grade achieves the 2mV offset specification through laser trimming or improved wafer process control compared to the standard grade (3mV for B-grade, 7mV for original). The 94dB typical CMRR provides good common-mode rejection for single-supply applications with varying ground reference.

Pin Description: LM358BAIDR Pin Definition and Functions
Pin Mnemonic Description
1 OUT A Output A
2 IN- A Inverting input A
3 IN+ A Non-inverting input A
4 GND Ground / V-
5 IN+ B Non-inverting input B
6 IN- B Inverting input B
7 OUT B Output B
8 V+ Positive supply
Application Scenarios: In which products and applications is LM358BAIDR used
  • Cost-sensitive low-side current sensing with ground-referenced input range
  • Power supply voltage monitoring with 36V supply range and 2mV offset
  • White goods motor control feedback with integrated EMI filter for noisy environment
  • General-purpose signal conditioning with industry-standard LM358 pinout upgrade
Alternative Models: What chips are recommended as replacements for LM358BAIDR
Model Manufacturer Key Difference
LM358BIDR TI 3mV offset (B grade)
LM358IDR TI 7mV offset, original
TLV358IDR TI RRIO, lower voltage
LM358DT ST Similar dual op amp

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1