Opens in a new tab

LM358N

Dual op-amp, 1.1MHz GBW, 3-32V single supply, GND-referenced input, PDIP-8

15500

Effective Inventory

Image for reference only

Manufacturer Part:

LM358N

Package:

PDIP-8 (9.27 x 6.35 x 4.57 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LM358N from Texas Instruments is a dual general-purpose operational amplifier with 1MHz GBW, 0.7V/us slew rate, single-supply operation (3V to 32V), and low input bias current (45nA) in an 8-pin PDIP package.

Key Specifications

Channels 2 (Dual)
Supply Voltage 3 V to 32 V (single), +/-1.5 to +/-16V (dual)
GBW 1.1 MHz
Slew Rate 0.7 V/us
Input Offset Voltage +/-3 mV typical, +/-7 mV max
Input Bias Current 45 nA typical
Output Current +/-20 mA typical
Quiescent Current 0.7 mA per amplifier
CMRR 85 dB typical
Operating Temperature 0°C to +70°C
Package PDIP-8 (through-hole)

Features

  • Dual general-purpose op-amp with single-supply operation from 3V to 32V
  • Input common-mode range includes ground for single-supply applications

Applications

  • General-purpose signal conditioning, filtering, and buffer circuits
Product Introduction: LM358N Product Introduction

The LM358N from Texas Instruments is a dual general-purpose operational amplifier from the industry-standard LM358 family. The device consists of two independent high-gain, internally frequency-compensated op-amps designed to operate from a single supply over a wide range of 3V to 32V (or +/-1.5V to +/-16V dual supplies). A key feature is that the input common-mode voltage range includes ground, allowing the amplifier to operate in single-supply applications without a negative supply. The output voltage can swing to within a few millivolts of ground when driving low-current loads. The 1.1MHz gain-bandwidth product and 0.7V/us slew rate are adequate for many general-purpose audio and instrumentation applications. The 45nA input bias current allows interfacing with high-impedance sources. The N suffix indicates the 8-pin PDIP through-hole package, the most common and cost-effective package for prototyping and low-volume production.

Working Principle: LM358N Working Principle

The LM358N operates as a dual single-supply operational amplifier. (1) Single-Supply Input Stage: The input stage uses a PNP differential pair with the emitters connected to VCC through a current source. This topology allows the input common-mode voltage to extend to ground (0V) because the PNP transistors remain active when both inputs are at ground potential. The maximum common-mode voltage is approximately VCC-1.5V. (2) Output Stage: The output uses a class-AB push-pull configuration with an NPN pull-up transistor and a passive (resistive) pull-down. The resistive pull-down allows the output to swing very close to ground (typically 5mV at low load current), but limits the output sink current compared to the source current. (3) Internal Compensation: A 30pF internal capacitor provides dominant-pole compensation, ensuring stability in unity-gain (voltage follower) configurations without external compensation components. The 1.1MHz GBW product is set by this compensation. (4) Low-Voltage Operation: The LM358 is specified to operate down to 3V single supply, making it suitable for 3.3V and 5V logic-powered systems.

Pin Description: LM358N Pin Definition and Functions
Pin Name Function
1 OUT A Output A
2 IN- A Inverting input A
3 IN+ A Non-inverting input A
4 GND/V- Ground or negative supply
5 IN+ B Non-inverting input B
6 IN- B Inverting input B
7 OUT B Output B
8 VCC/V+ Positive supply (3-32V)
Application Scenarios: In which products and applications is LM358N used
  • General-purpose signal conditioning and filtering with single supply
Alternative Models: What chips are recommended as replacements for LM358N
Manufacturer Part Number Package Notes
TI LM358DR SOIC-8 SMD version, same spec
ST LM358N PDIP-8 ST brand, pin-compatible
onsemi LM358AN PDIP-8 Higher temp grade, 125C

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1