Opens in a new tab

LM393BIPWR

Dual comparator, B-version, 36V, 1us, TSSOP-8

8693

Effective Inventory

Image for reference only

Manufacturer Part:

LM393BIPWR

Package:

TSSOP-8 (3.0×6.4mm, 0.65mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

LM393BIPWR from TI is the next-generation B-version dual comparator with improved specs: 0.37mV offset, 3.5nA bias current, 200uA/ch supply current, 1us response time. Open-collector output, 2-36V supply. TSSOP-8 industrial -40C to +85C.

Working Principle

B-version improves over classic LM393 with lower offset (0.37mV vs 5mV), lower bias current (3.5nA vs 25nA), faster response (1us vs 1.3us), and 2kV ESD clamps. Two independent comparators with open-collector outputs that can wire-OR. Common-mode input range includes ground.

Pin Description

Pin Name Function
1 1OUT Comparator 1 output
2 1IN- Inverting input 1
3 1IN+ Non-inverting input 1
4 GND Ground
5 2IN+ Non-inverting input 2
6 2IN- Inverting input 2
7 2OUT Comparator 2 output
8 VCC 2-36V supply

Applications

  • Battery monitoring
  • Window comparators
  • Zero-crossing detectors
  • Level shifting

Alternative Models

Mfr Part Notes
TI LM393BIDR SOIC-8 version
TI LM2903BIDGKR VSSOP-8 auto grade
Product Introduction: LM393BIPWR Product Introduction

LM393BIPWR from TI is the next-generation B-version dual comparator with improved specs: 0.37mV offset, 3.5nA bias current, 200uA/ch supply current, 1us response time. Open-collector output, 2-36V supply. TSSOP-8 industrial -40C to +85C.

Working Principle: LM393BIPWR Working Principle

B-version improves over classic LM393 with lower offset (0.37mV vs 5mV), lower bias current (3.5nA vs 25nA), faster response (1us vs 1.3us), and 2kV ESD clamps. Two independent comparators with open-collector outputs that can wire-OR. Common-mode input range includes ground.

Pin Description: LM393BIPWR Pin Definition and Functions
Pin Name Function
1 1OUT Comparator 1 output
2 1IN- Inverting input 1
3 1IN+ Non-inverting input 1
4 GND Ground
5 2IN+ Non-inverting input 2
6 2IN- Inverting input 2
7 2OUT Comparator 2 output
8 VCC 2-36V supply
Application Scenarios: In which products and applications is LM393BIPWR used
  • Battery monitoring
  • Window comparators
  • Zero-crossing detectors
  • Level shifting
Alternative Models: What chips are recommended as replacements for LM393BIPWR
Mfr Part Notes
TI LM393BIDR SOIC-8 version
TI LM2903BIDGKR VSSOP-8 auto grade

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1