Opens in a new tab

LM5160DNTR

65V 2A sync buck/Fly-Buck, COT control, WSON-12, 1MHz, integrated FETs, 125C

13268

Effective Inventory

Image for reference only

Manufacturer Part:

LM5160DNTR

Package:

WSON-12 (4.00 x 4.00 x 0.80 mm, exposed pad)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LM5160DNTR from Texas Instruments is a 65V, 2A synchronous buck/Fly-Buck DC-DC converter in a WSON-12 package. With integrated MOSFETs and constant-on-time control, it provides high-efficiency power conversion from 4.5V-65V input.

Key Specifications

Input Voltage 4.5 V to 65 V
Output Voltage 2 V to 60 V (adjustable)
Output Current 2 A (max), 2.5A switch current limit
Switching Frequency 50 kHz to 1 MHz (adjustable)
Feedback Accuracy +/-1% over temperature
Operating Temperature -40C to +125C

Features

  • 4.5V-65V wide input with 2A integrated MOSFETs for compact design
  • Constant-on-time control with no external loop compensation
  • Fly-Buck isolated output support with forced PWM mode
  • +/-1% feedback voltage regulation over full temperature range
  • Programmable soft start with pre-bias startup capability
  • Peak and valley current limit with adjustable UVLO and thermal shutdown

Applications

  • Industrial power supply from 24V/48V bus
  • Isolated bias supply for IGBT/SiC gate drivers
  • Telecom and datacom DC-DC converters
  • Automotive and battery-powered step-down converters
Product Introduction: LM5160DNTR Product Introduction

The LM5160DNTR from Texas Instruments is a 65V, 2A synchronous step-down (buck) and Fly-Buck DC-DC converter in a WSON-12 package with exposed thermal pad. The device integrates both high-side and low-side N-channel MOSFETs, eliminating external switches and Schottky diodes. The adaptive constant-on-time (COT) control scheme requires no external loop compensation, supports high step-down ratios, and provides fast transient response. An internal feedback amplifier maintains +/-1% output voltage regulation over the entire operating temperature range. The on-time varies inversely with input voltage, resulting in nearly constant switching frequency. The switching frequency is adjustable from 50kHz to 1MHz via an external resistor, allowing optimization of efficiency versus component size. The FPWM pin selects between forced continuous conduction mode (CCM) for Fly-Buck and low-noise applications, or discontinuous conduction mode (DCM) for higher light-load efficiency. In Fly-Buck configuration, coupled inductors generate isolated output rails, ideal for IGBT and SiC gate driver bias supplies. Protection features include peak and valley current limit, adjustable input UVLO with hysteresis, and thermal shutdown with hysteresis.

Working Principle: LM5160DNTR Working Principle

The LM5160DNTR uses adaptive constant-on-time (COT) control for the buck power stage. (1) On-Time Generation: The high-side MOSFET on-time is set by an external RON resistor and is inversely proportional to VIN. This inverse relationship maintains nearly constant switching frequency as VIN varies. An on-time pulse is initiated when the FB voltage falls below the reference (2V typical). (2) Off-Time: After the on-time expires, the high-side FET turns off and the low-side synchronous FET turns on. In DCM mode, when the inductor current reaches zero, the low-side FET turns off and the SW node rings, reducing switching losses at light load. In FPWM mode, the low-side FET stays on continuously. (3) Feedback: A transconductance (GM) error amplifier minimizes the error between the FB pin voltage and the 2V reference, improving line and load regulation. The soft-start capacitor provides compensation for this error loop. (4) Current Limit: Peak current limit (2.5A typical) terminates the on-time immediately when exceeded. Valley current limit prevents the inductor current from building up during output overloads. An intelligent current limit off-timer adjusts the off-time based on FB and VIN conditions. (5) Fly-Buck: In FPWM mode, the continuous inductor current drives coupled windings to generate isolated outputs, with the primary output regulating the secondary through the turns ratio.

Pin Description: LM5160DNTR Pin Definition and Functions
Pin Name Type Function
1 VIN Power Input supply (4.5-65V)
2 EN/UVLO Input Enable and UVLO adjust
3 RON Input On-time resistor connection
4 FB Input Feedback voltage (2V reference)
5 SS Input Soft-start capacitor
6 FPWM Input Forced PWM mode select
7 GND Ground Ground
8 SW Output Switch node (inductor connection)
9 BST Power Bootstrap capacitor
10 VCC Output Internal 7.5V regulator output
Application Scenarios: In which products and applications is LM5160DNTR used
  • Industrial power supply from 24V/48V bus with 2A output
  • Isolated bias supply for IGBT/SiC gate drivers using Fly-Buck topology
  • Telecom and datacom DC-DC converters at 65V input
  • Automotive and battery-powered step-down converters at 125C
Alternative Models: What chips are recommended as replacements for LM5160DNTR
Manufacturer Part Number Package Notes
TI LM5160ADNTR WSON-12 External VCC bias option
TI LM5161DNTR WSON-12 1A, 65V, smaller FETs
MPS MP8759GD-Z QFN-12 60V, 4A buck
Monolithic Power MP4688GJ-Z TSOT23-6 60V, 0.5A, ultra-small

Recommend Parts

MSP432P401RIPZR

Ultra-low-power Cortex-M4F MCU, 48MHz, 256KB Flash, 14-bit ADC, 850nA standby, 100-LQFP

Brand: TI

Package: 100-LQFP (14 x 14 x 1.4mm)

IN STOCK: 3750pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PTN78060WAH

4.5A positive-input buck-IT module, adjustable, SMD module

Brand: TI

Package: Module (34.3 x 19.3 x 8.2 mm)

IN STOCK: 4786pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC16F1526-I/PT

8-bit PIC16 MCU, 14KB Flash, 768B RAM, 30-ch 10-bit ADC, 10x CCP, 64-TQFP, XLP

Brand: MICROCHIP

Package: TQFP-64 (10.0 x 10.0 x 1.05 mm)

IN STOCK: 5600pcs

Cargo cycle: 3-7 Days

The minimum order is 1

R2A20178NP

8-channel 8-bit voltage output DAC, R-2R architecture, buffered rail-to-rail output, SPI interface up to 25MHz, 2.7-5.5V

Brand: Renesas

Package: 24-pin HWQFN (4x4x0.75mm)

IN STOCK: 6399pcs

Cargo cycle: 3-7 Days

The minimum order is 1

VS-40CPQ100-N3

Dual Schottky rectifier, common cathode, 2x20A, 100V, 0.61V VF, TO-247AC-3L, Vishay Q-series, 175 degC TJ, guard ring

Brand: VISHAY

Package: TO-247AC 3L (3-lead through-hole, 15.5mm width, tab for heatsink, common cathode configuration)

IN STOCK: 8950pcs

Cargo cycle: 3-7 Days

The minimum order is 1

BSC040N10NS5

OptiMOS 5 N-ch 100V 4mΩ 136A MOSFET, SuperSO8

Brand: infineon

Package: PG-TDSON-8 (SuperSO8, 5 x 6mm)

IN STOCK: 10509pcs

Cargo cycle: 3-7 Days

The minimum order is 1