Opens in a new tab

LMC660AIMX/NOPB

CMOS quad op-amp, 4.75-15.5V, 1.4MHz GBW, rail-to-rail output, 2fA Ibias, SOIC-14

7456

Effective Inventory

Image for reference only

Manufacturer Part:

LMC660AIMX/NOPB

Package:

SOIC-14 (D) (8.65 x 3.91 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The Texas Instruments LMC660AIMX/NOPB is a CMOS quad operational amplifier featuring rail-to-rail output swing and an input common-mode range that includes ground. Operating from a single 4.75 V to 15.5 V supply, it achieves 126 dB voltage gain with ultra-low input bias current of 2 fA, making it ideal for high-impedance sensor interfaces and precision signal conditioning.

Key Specifications

Number of Amplifiers 4 (Quad)
Supply Voltage Range 4.75 V to 15.5 V
GBW 1.4 MHz
Input Bias Current 2 fA (typical)
Voltage Gain 126 dB
Slew Rate 1.1 V/µs
Package SOIC-14 (D)

Features

  • Rail-to-rail output swing
  • Input common-mode range includes V- (ground)
  • Ultra-low input bias current: 2 fA typical
  • High voltage gain: 126 dB
  • Low input offset voltage: 3 mV max
  • Low offset voltage drift: 1.3 µV/°C
  • Specified for 2 kOhm and 600 Ohm loads

Applications

  • High-impedance sensor signal conditioning
  • Photodiode and transimpedance amplifiers
  • Precision instrumentation
  • Medical monitoring equipment
  • Battery-powered analog circuits
Product Introduction: LMC660AIMX/NOPB Product Introduction

The LMC660AIMX/NOPB is a CMOS quad operational amplifier from Texas Instruments, designed for single-supply operation from 4.75 V to 15.5 V. Built on TI’s advanced CMOS process, it achieves performance levels typically associated with bipolar amplifiers, including 126 dB open-loop voltage gain and low 22 nV/sqrt(Hz) voltage noise. The rail-to-rail output swing and input common-mode range that includes ground enable true single-supply operation without signal clipping. With ultra-low input bias current of 2 fA, the LMC660 is particularly suited for high-impedance source applications such as photodiode amplifiers and pH electrode interfaces.

Working Principle: LMC660AIMX/NOPB Working Principle

The LMC660 employs a CMOS input stage that provides extremely low input bias current (2 fA typical) due to the gate insulation of the input MOSFETs. The input stage common-mode range extends to the negative rail (ground in single-supply operation), enabling direct ground-referenced signal processing. The output stage uses a complementary PMOS/NMOS push-pull configuration to achieve rail-to-rail output swing. Internal compensation ensures stability in unity-gain configurations. The low quiescent current of 400 µA per amplifier (independent of supply voltage) makes the device suitable for battery-powered applications while maintaining 1.4 MHz gain-bandwidth product.

Pin Description: LMC660AIMX/NOPB Pin Definition and Functions
Pin Name Type Function
1 OUT A Output Amplifier A output
2 -IN A Input Amplifier A inverting input
3 +IN A Input Amplifier A non-inverting input
4 V+ Power Positive supply voltage
5 +IN B Input Amplifier B non-inverting input
6 -IN B Input Amplifier B inverting input
7 OUT B Output Amplifier B output
8 OUT C Output Amplifier C output
9 -IN C Input Amplifier C inverting input
10 +IN C Input Amplifier C non-inverting input
11 V- Power Negative supply / ground
12 +IN D Input Amplifier D non-inverting input
13 -IN D Input Amplifier D inverting input
14 OUT D Output Amplifier D output
Application Scenarios: In which products and applications is LMC660AIMX/NOPB used
  • High-impedance pH and ion-selective electrode amplifiers
  • Photodiode transimpedance amplifiers
  • Precision medical instrumentation
  • Single-supply signal conditioning from ground-referenced sensors
  • Battery-powered portable measurement equipment
Alternative Models: What chips are recommended as replacements for LMC660AIMX/NOPB
Manufacturer Part Number Channels GBW Notes
TI LMC6462AIMX Dual 1.4 MHz Dual version, RRIO
ADI AD8608ARZ Quad 7.3 MHz Faster RRIO CMOS op-amp
Microchip MCP6044-E/SL Quad 3.0 MHz Lower voltage, RRIO
TI OPA4340UA Quad 5.5 MHz Higher speed RRIO option

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1