Opens in a new tab

LMV324IDR

Quad low-voltage op-amp, RR output, 1.1MHz, 2.7-5.5V, SOIC-14

5506

Effective Inventory

Image for reference only

Manufacturer Part:

LMV324IDR

Package:

SOIC-14 (8.65×3.91mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LMV324IDR from TI is a quad low-voltage operational amplifier with rail-to-rail output, 1.1MHz GBW, and 2.7-5.5V supply in SOIC-14 for battery-powered and low-voltage analog applications.

Key Specifications

Channels 4
GBW 1.1MHz
Slew Rate 1.0V/us
Supply 2.7-5.5V
Iq/ch 130uA
Input Offset 1.7mV typ
Temp -40~125C

Features

  • Quad rail-to-rail output op-amp
  • Low-voltage 2.7-5.5V operation
  • 1.1MHz GBW
  • 130uA per channel
  • Cost-effective solution

Applications

  • Battery-powered instruments
  • Portable electronics
  • Sensor signal conditioning
  • Active filters
  • Low-voltage analog circuits
Product Introduction: LMV324IDR Product Introduction

The LMV324IDR from TI is a quad low-voltage operational amplifier with rail-to-rail output, 1.1MHz GBW, and 2.7-5.5V supply in SOIC-14 for battery-powered and low-voltage analog applications.

Working Principle: LMV324IDR Working Principle

The LMV324IDR is a quad low-voltage rail-to-rail output operational amplifier from TI/ST in SOIC-14, operating from 2.7V to 5.5V with 1.1MHz gain-bandwidth product and 1V/us slew rate. It is the low-voltage version of the industry-standard LM324, maintaining pin compatibility while extending operation down to 2.7V. The output stage swings to within 50mV of the rails with a 10k-ohm load (rail-to-rail output), but the input common-mode range extends only to VCC-1V (not rail-to-rail input). The supply current is 130uA per amplifier, giving a GBW-to-Iq ratio of 8.5kHz/uA. The input bias current is 45nA typical, and input offset voltage is 1.7mV typical. The device is designed for single-supply operation: the GND pin (pin 11) replaces the V- pin of the LM324, and the input common-mode range includes ground (0V), making it suitable for ground-referenced signal conditioning. The 1.1MHz GBW supports active filters up to approximately 100kHz. Each amplifier is independent, allowing different configurations per channel (inverting, non-inverting, comparator). The -IDR suffix specifies SOIC-14, industrial temperature range (-40C to +85C), tape-and-reel. Applications include battery-powered signal conditioning, sensor interfaces, and portable medical equipment.

Pin Description: LMV324IDR Pin Definition and Functions
Pin Name Type Function
1 1OUT Output Channel 1 output
2 1IN- Input Channel 1 inverting input
3 1IN+ Input Channel 1 non-inverting input
4 VCC Power Supply (2.7-5.5V)
5 2IN+ Input Channel 2 non-inverting input
6 2IN- Input Channel 2 inverting input
7 2OUT Output Channel 2 output
8 3OUT Output Channel 3 output
9 3IN- Input Channel 3 inverting input
10 3IN+ Input Channel 3 non-inverting input
11 GND Power Ground (0V)
12 4IN+ Input Channel 4 non-inverting input
13 4IN- Input Channel 4 inverting input
14 4OUT Output Channel 4 output
Application Scenarios: In which products and applications is LMV324IDR used
  • Battery-powered instruments
  • Portable electronics
  • Sensor signal conditioning
  • Active filters
  • Low-voltage analog circuits
  • Alternative Models: What chips are recommended as replacements for LMV324IDR
    Manufacturer Part Number Package Notes
    Texas Instruments LMV324IDR SOIC-14 Same device, TI label
    STMicroelectronics LMV324IDT SOIC-14 Same device, ST label
    Texas Instruments TLV9004IDR SOIC-14 1MHz RR I/O quad, lower offset
    Microchip MCP6004-E/SL SOIC-14 1MHz RR quad, 1.8-5.5V
    Analog Devices ADA4665-2ACPZ-R7 LFCSP-10 Dual 1.8V RR, low power

    Recommend Parts

    0751.0505

    Schurter fuse, 0751.0505

    Brand: schurter

    Package: See datasheet

    IN STOCK: 6768pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    TL062CDR

    Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

    Brand: TI

    Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

    IN STOCK: 11576pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    P89LPC922FN

    8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

    Brand: NXP

    Package: SSOP-20 (7.2 x 5.3 mm)

    IN STOCK: 12628pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    AC0603JR-070RL

    Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

    Brand: Yageo

    Package: 0603 (1608 Metric)

    IN STOCK: 100000pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    LMR34206FSC5RNXRQ1

    42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

    Brand: TI

    Package: SOT-563 (1.6 x 1.2 x 0.55mm)

    IN STOCK: 6500pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    AO3402

    30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

    Brand: aosmd

    Package: SOT-23 (2.9 x 1.6 x 1.25mm)

    IN STOCK: 14066pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1