Opens in a new tab

LNK3294G-TL

900V LinkSwitch-TN2 offline switcher IC, 170mA output, 66kHz, buck/buck-boost/flyback, SMD-8C

4287

Effective Inventory

Image for reference only

Manufacturer Part:

LNK3294G-TL

Package:

SMD-8C (8-SMD, 7 Leads, Gull Wing) 9.83 x 6.6 mm

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The Power Integrations LNK3294G-TL is a LinkSwitch-TN2 series offline switcher IC with an integrated 900V power MOSFET, designed for non-isolated AC/DC power supplies. It supports buck, buck-boost, and flyback topologies with comprehensive system-level protection in an SMD-8C package.

Key Specifications

Series LinkSwitch-TN2
Breakdown Voltage 900 V
Input Voltage Range 85 VAC to 265 VAC
Output Current (CCM, 230V) 170 mA
Output Current (MDCM, 230V) 120 mA
Switching Frequency 66 kHz
Max Duty Cycle 72%
Topology Buck, Buck-Boost, Flyback
Isolation Non-Isolated
Operating Temperature -40 to +150 C (TJ)
Package SMD-8C (8-SMD, 7 Leads, Gull Wing)

Features

  • Integrated 900V power MOSFET for industrial safety margin
  • Comprehensive protection: OVP, OVL, OTP, short-circuit, open-loop, overload
  • Standby supply current less than 100 uA
  • No-load consumption below 30 mW with external bias
  • Frequency jittering reduces EMI filter complexity
  • Selectable current limit modes via BYPASS pin capacitor
  • Extended creepage between DRAIN and other pins improves reliability

Applications

  • Smart LED drivers
  • Industrial controls and IoT devices
  • Home and building automation
  • Appliance power supplies
  • Energy metering
Product Introduction: LNK3294G-TL Product Introduction

The Power Integrations LNK3294G-TL is a member of the LinkSwitch-TN2 family of ICs for non-isolated off-line power supplies. It provides dramatically improved performance compared to traditional linear or cap-dropper solutions. The device integrates a 900V power MOSFET, oscillator, on/off control for highest efficiency at light load, a high-voltage switched current source for self-biasing, frequency jittering, fast cycle-by-cycle current limit, hysteretic thermal shutdown, and output and input overvoltage protection circuitry onto a monolithic IC. It supports buck, buck-boost, and flyback converter topologies and consumes very little current in standby, meeting all no-load and standby specifications worldwide.

Working Principle: LNK3294G-TL Working Principle

The LNK3294G-TL integrates a 900V power MOSFET and a control IC on a single monolithic die. The device uses primary-side on/off control to regulate the output, eliminating the need for an optocoupler or secondary-side feedback circuit. The high-voltage switched current source self-biases the IC from the DRAIN pin, requiring no bias winding. On each switching cycle, the internal oscillator drives the MOSFET at 66 kHz with frequency jittering to reduce EMI. The on/off control scheme enables or disables switching cycles based on the feedback signal, maintaining high efficiency across a wide load range. Protection circuits including cycle-by-cycle current limit, hysteretic thermal shutdown (135-150 degC), output overvoltage protection, and input overvoltage protection ensure safe operation under fault conditions. The BYPASS pin capacitor value selects between two current limit modes for design flexibility.

Pin Description: LNK3294G-TL Pin Definition and Functions
Pin Name Type Function
1 DRAIN Power High-voltage power MOSFET drain; also provides startup bias current
2 BYPASS Power Internal supply bypass pin; capacitor value selects current limit mode
3 FB Input Feedback input; receives signal from output via resistive divider or optocoupler
4 SOURCE Power Power MOSFET source; primary-side ground reference
5-7 SOURCE Power Additional source pins for thermal dissipation
8 DRAIN Power Additional drain pin for high-voltage connection
Application Scenarios: In which products and applications is LNK3294G-TL used
  • Smart LED driver power supplies with high reliability requirements
  • Industrial control system non-isolated power supplies
  • IoT and home automation sensor nodes
  • Appliance auxiliary power supplies replacing linear transformers
  • Energy metering and smart meter power supplies
Alternative Models: What chips are recommended as replacements for LNK3294G-TL
Manufacturer Part Number Package Notes
Power Integrations LNK3294P-TL DIP-8 Through-hole variant, same specs
Power Integrations LNK3204D-TL SMD-8C 725V variant, lower breakdown
Power Integrations LNK3208G-TL SMD-8C 725V, higher output current
onsemi NCP1014 SOT-223 Similar monolithic switcher, different architecture
STMicroelectronics VIPer12A SO-8 Similar offline switcher IC

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1