Opens in a new tab

LP2951CMMX-3.0/NOPB

100 mA LDO, 3.0 V fixed, 2.3–30 V input, 75 µA Iq, error flag, enable, 8-VSSOP

10600

Effective Inventory

Image for reference only

Manufacturer Part:

LP2951CMMX-3.0/NOPB

Package:

8-VSSOP (DGK) — 3.0 x 4.9 mm

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LP2951CMMX-3.0/NOPB is a 100 mA micropower LDO voltage regulator from Texas Instruments with a fixed 3.0 V output. Packaged in an 8-pin VSSOP (DGK), it features very low quiescent current (75 µA typical), low dropout voltage, and additional system functions including an error flag for low output detection and a logic-controlled shutdown input. It is ideal for battery-powered and low-power applications.

Key Specifications

Output Voltage 3.0 V (Fixed)
Output Current 100 mA
Input Voltage Range 2.3 V to 30 V
Dropout Voltage 380 mV typ at 100 mA
Quiescent Current 75 µA typical
Output Accuracy ±0.5% typical
Package 8-VSSOP (DGK) — 3.0 x 4.9 mm
Operating Temperature -40°C to +125°C

Features

  • Very low quiescent current of 75 µA typical
  • Low dropout voltage: 380 mV at 100 mA
  • Error flag output warns of low output voltage (power-on reset)
  • Logic-controlled shutdown input
  • Stable with low-ESR output capacitors (10 mΩ to 6 Ω)

Applications

  • Battery-powered instruments and handheld devices
  • Low-dropout voltage reference applications
  • Power-on reset generation via error flag
  • Automotive and industrial control systems
  • Portable communication equipment
Product Introduction: LP2951CMMX-3.0/NOPB Product Introduction

The LP2951-N is a micropower voltage regulator from Texas Instruments with very low quiescent current and very low dropout voltage, ideally suited for battery-powered systems. The quiescent current increases only slightly in dropout, prolonging battery life. The device features tight initial tolerance (0.5% typical), excellent load and line regulation (0.05% typical), and a very low output voltage temperature coefficient. Additional features include an error flag output for low output detection and a logic-compatible shutdown input for on/off control.

Working Principle: LP2951CMMX-3.0/NOPB Working Principle

The LP2951-N uses a PNP pass transistor in a feedback-regulated topology. The output voltage is sensed by an internal resistor divider (for fixed-voltage versions) and compared against a precision bandgap reference. The error amplifier adjusts the PNP transistor drive to maintain regulation. The error flag comparator monitors the output and pulls the ERROR pin low when the output drops below approximately 90% of the nominal value, useful for power-on reset. The shutdown input turns off the regulator when pulled low, reducing supply current to near zero.

Pin Description: LP2951CMMX-3.0/NOPB Pin Definition and Functions
Pin Name Type Function
1 VOUT Output Regulated 3.0 V output
2 SENSE Input Output voltage sense (connect to VOUT)
3 GND Power Ground reference
4 ERROR Output Error flag (open collector, low = undervoltage)
5 SD Input Shutdown control (low = off)
6 TAP Output Internal resistor tap (for adj version)
7 FB Input Feedback / output voltage adjust
8 VIN Input Input supply voltage (2.3–30 V)
Application Scenarios: In which products and applications is LP2951CMMX-3.0/NOPB used
  • 3.0 V rail generation from battery in portable instruments
  • Low-power voltage reference with error flag for power-on reset
  • Always-on standby power in microcontroller systems
  • Automotive ECU low-dropout supply regulation
  • Remote sensor power supply with shutdown control
Alternative Models: What chips are recommended as replacements for LP2951CMMX-3.0/NOPB
Manufacturer Part Number Package Notes
TI LP2951CMX-3.3/NOPB 8-VSSOP 3.3 V output variant
TI LP2951CMX-5.0/NOPB 8-VSSOP 5.0 V output variant
TI TLV70030DDCR 5-SOT-23 3.0 V LDO, lower Iq, smaller package
Microchip MCP1703T-3002E/MB 3-SOT-89 3.0 V, 250 mA, higher current
onsemi NCP511SN30T1G 5-TSOP-5 3.0 V, 80 mA LDO

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1