Opens in a new tab

LP3883ESX-1.2/NOPB

3 A ultra-LDO, 1.2 V fixed, 210 mV dropout, CMOS, TO-263, external bias

10255

Effective Inventory

Image for reference only

Manufacturer Part:

LP3883ESX-1.2/NOPB

Package:

TO-263 (DDPAK-5 / KTT) — 10.16 x 15.24 mm

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LP3883ESX-1.2/NOPB is a 3 A ultra-low-dropout linear regulator from Texas Instruments with a fixed 1.2 V output. Packaged in a TO-263 (DDPAK-5), it uses a CMOS architecture with external bias rail for ultra-low VIN operation. The device features 210 mV typical dropout at 3 A, low ground current, and fast transient response, making it ideal for high-current, low-voltage core power applications.

Key Specifications

Output Voltage 1.2 V (Fixed)
Output Current 3 A
Input Voltage Range 1.426 V to 5.5 V (VIN) / 4.5–6 V (VBIAS)
Dropout Voltage 210 mV typical at 3 A
Ground Pin Current 3 mA typical at full load
Shutdown Current 60 nA typical
Package TO-263 (DDPAK-5 / KTT)
Operating Temperature -40°C to +125°C

Features

  • Ultra-low dropout: 210 mV at 3 A using NMOS pass transistor
  • CMOS architecture — negligible drive current vs. bipolar LDOs
  • External bias rail enables operation from ultra-low VIN
  • Fast transient response for DSP and microcontroller cores
  • 1.5% output accuracy at 25°C

Applications

  • DSP and microcontroller core voltage regulation
  • FPGA core power supplies
  • Switch-mode power supply post-regulation
  • High-current low-voltage point-of-load regulation
  • Server and computing core power
Product Introduction: LP3883ESX-1.2/NOPB Product Introduction

The LP3883 is a high-current, fast-response ultra-low-dropout linear regulator from Texas Instruments. Fabricated on a CMOS process, the device operates from two input voltages: VBIAS provides gate drive for the NMOS power transistor, while VIN supplies power to the load. This dual-rail architecture enables operation from ultra-low VIN voltages while maintaining regulation. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load. The 1.2 V fixed version delivers 3 A with only 210 mV dropout, making it ideal for high-current core voltage applications.

Working Principle: LP3883ESX-1.2/NOPB Working Principle

The LP3883 uses an NMOS pass transistor driven by an external VBIAS rail (4.5–6 V), which provides sufficient gate drive even when VIN is very close to VOUT. The output voltage is sensed by an internal resistor divider and compared against a precision bandgap reference. The error amplifier drives the NMOS gate to maintain regulation. The NMOS pass device provides very low dropout voltage because the gate can be driven above VIN by the VBIAS rail, allowing the transistor to fully enhance. The CMOS architecture means gate drive current is negligible compared to the base current required by PNP-based bipolar LDOs. The shutdown pin turns off the NMOS gate drive, reducing current to 60 nA.

Pin Description: LP3883ESX-1.2/NOPB Pin Definition and Functions
Pin Name Type Function
1 VIN Input Input supply to load (1.426–5.5 V)
2 GND Power Ground / thermal tab
3 SD Input Shutdown control (low = off)
4 VBIAS Input Bias supply for NMOS gate drive (4.5–6 V)
5 VOUT Output Regulated 1.2 V output
Application Scenarios: In which products and applications is LP3883ESX-1.2/NOPB used
  • 1.2 V DSP core power from 1.8 V or 2.5 V rail
  • FPGA VCCINT regulation at 1.2 V
  • Post-regulation after a switching regulator for noise-sensitive loads
  • Server CPU and memory core voltage regulation
  • High-current POL regulation in computing platforms
Alternative Models: What chips are recommended as replacements for LP3883ESX-1.2/NOPB
Manufacturer Part Number Package Notes
TI LP3883ESX-1.5/NOPB TO-263 1.5 V output variant
TI TPS5450DDAR 8-SO-PowerPAD 5 A buck converter, switching alternative
Analog Devices ADP3228ACPZ-1.2-R7 8-LFCSP 3 A LDO, 1.2 V
Maxim MAX8556ETE+T 28-TSSOP 6 A LDO controller
Infineon TLE4274GV33 TO-252 200 mA LDO, 3.3 V, automotive

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1