Opens in a new tab

LP3982ILDX-ADJ/NOPB

300 mA adjustable LDO, 2.5–6 V, 120 mV dropout, 37 µVrms noise, 60 dB PSRR, 8-WSON

10771

Effective Inventory

Image for reference only

Manufacturer Part:

LP3982ILDX-ADJ/NOPB

Package:

8-WSON (NGM) — 2.5 x 3.0 mm

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LP3982ILDX-ADJ/NOPB is a 300 mA ultra-low-dropout CMOS LDO regulator from Texas Instruments with adjustable output voltage. Packaged in an 8-pin WSON (NGM), it operates from 2.5 V to 6 V input and offers output voltage adjustable from 1.25 V to 6 V. The device features low noise (37 µVrms), high PSRR (60 dB), and a power-good flag, making it ideal for noise-sensitive analog and RF applications.

Key Specifications

Output Voltage 1.25 V to 6 V (Adjustable)
Output Current 300 mA
Input Voltage Range 2.5 V to 6 V
Dropout Voltage 120 mV typical at 300 mA
Quiescent Current 90 µA typical
Output Noise 37 µVrms (10 Hz to 100 kHz)
Package 8-WSON (NGM) — 2.5 x 3.0 mm
Operating Temperature -40°C to +85°C

Features

  • Ultra-low dropout: 120 mV at 300 mA
  • Very low noise: 37 µVrms (10 Hz–100 kHz)
  • High PSRR: 60 dB typical at 1 kHz
  • Power-good flag output for supply monitoring
  • 1 nA shutdown current for battery conservation

Applications

  • RF and wireless transceiver power supplies
  • Audio codec and DAC supply filtering
  • Battery-powered portable instruments
  • DSP and microcontroller core voltage regulation
  • Camera module power supplies
Product Introduction: LP3982ILDX-ADJ/NOPB Product Introduction

The LP3982 is a micropower, ultra-low-dropout, low-noise 300 mA CMOS regulator from Texas Instruments. Available in adjustable and fixed voltage versions, the device is pin- and package-compatible with the Maxim MAX8860. The PMOS pass transistor provides very low dropout voltage and consumes negligible drive current compared to PNP-based LDOs. The adjustable version uses an external resistor divider to set the output voltage from 1.25 V to 6 V. With 37 µVrms output noise and 60 dB PSRR, the LP3982 is ideal for noise-sensitive RF and analog circuits.

Working Principle: LP3982ILDX-ADJ/NOPB Working Principle

The LP3982 uses a PMOS pass transistor in a feedback-regulated LDO topology. The output voltage is sensed through an external resistor divider (adjustable version) and compared against an internal 1.25 V bandgap reference by the error amplifier. The error amplifier drives the PMOS gate to maintain regulation. A noise bypass capacitor on the CC pin filters the bandgap reference, reducing output noise to 37 µVrms. The FAULT pin provides an open-drain power-good indicator that pulls low when the output drops out of regulation. The SHDN pin enables/disables the regulator with 1 nA shutdown current.

Pin Description: LP3982ILDX-ADJ/NOPB Pin Definition and Functions
Pin Name Type Function
1 VIN Input Input supply voltage (2.5–6 V)
2 GND Power Ground reference
3 SHDN Input Shutdown control (high = enabled)
4 SET Input Feedback / output voltage adjust
5 CC I/O Noise bypass capacitor connection
6 FAULT Output Power-good flag (open drain, low = fault)
7 VOUT Output Regulated output voltage
8 GND Power Ground / thermal pad
Application Scenarios: In which products and applications is LP3982ILDX-ADJ/NOPB used
  • Low-noise power supply for RF transceivers and LNAs
  • Audio codec and high-resolution DAC supply regulation
  • Camera sensor module power with clean output
  • Portable medical device analog supply
  • PLL and oscillator supply filtering
Alternative Models: What chips are recommended as replacements for LP3982ILDX-ADJ/NOPB
Manufacturer Part Number Package Notes
TI LP3982IMM-ADJ/NOPB 8-VSSOP Same function, VSSOP package
Maxim MAX8860EUA30+ 8-µMAX Pin-compatible, fixed 3.0 V
TI TPS73701DCQR 6-SOT-223 1 A LDO, higher current, adj
Analog Devices ADP122AUJZ-ADJ-R7 5-TSOT 500 mA LDO, adjustable
Microchip MCP1824T-ADJE/DC 5-SOT-23 300 mA, adj, smaller package

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1