Opens in a new tab

LQW18AN62NG00D

62nH ±2% wirewound RF inductor, 0603, Q=38, SRF=2.3GHz, 280mA

5170

Effective Inventory

Image for reference only

Manufacturer Part:

LQW18AN62NG00D

Package:

0603 (1608 Metric) – 1.6 × 0.8 × 0.8mm

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LQW18AN62NG00D from Murata is a 62nH ±2% wirewound RF inductor in an 0603 (1608 metric) package. With a high Q factor of 38 (min) at 200MHz, self-resonant frequency of 2.3GHz (min), and rated current of 280mA, this unshielded wirewound inductor is designed for VHF/UHF RF matching, filtering, and oscillator circuits in wireless communication equipment.

Key Specifications

Inductance 62nH ±2%
Test Frequency 100MHz
Q Factor (min) 38 @ 200MHz
Self-Resonant Frequency (min) 2300MHz (2.3GHz)
DC Resistance (max) 0.51Ω
Rated Current 280mA (temperature rise basis)
Package 0603 (1608 Metric) – 1.6 × 0.8 × 0.8mm
Operating Temperature -55°C to +125°C
Construction Wirewound, Unshielded
Core Material Ferrite
Packaging 180mm paper taping (4000pcs/reel)

Features

  • 62nH ±2% tight tolerance for precise RF matching
  • High Q factor (38 min @ 200MHz) for low-loss RF circuits
  • 2.3GHz SRF for VHF/UHF operation below 1.5GHz
  • Wirewound construction provides higher Q than multilayer inductors
  • 0603 compact footprint for high-density RF layouts

Applications

  • RF front-end matching network for Bluetooth/Wi-Fi
  • VCO inductor for oscillator circuits
  • RF bandpass and notch filter
  • PA input/output matching in cellular handsets
  • GPS/GNSS LNA input matching
Product Introduction: LQW18AN62NG00D Product Introduction

The LQW18AN62NG00D from Murata is a 62nH ±2% wirewound RF inductor in an 0603 (1608 metric) package, part of the LQW18AN_00 series. The Murata part numbering: LQW=LQW series (wirewound RF inductor), 18=size code (0603), A=wirewound type, N=tolerance (±2%), 62=inductance code (62nH), N=±2% again, G00=individual code, D=packaging (180mm paper taping, 4000pcs/reel). The wirewound construction provides significantly higher Q factor than multilayer inductors at the same inductance value, making it the preferred choice for loss-sensitive RF circuits. The ±2% tolerance ensures precise impedance matching in RF front-end modules. The 2.3GHz minimum SRF allows reliable operation up to approximately 1.5GHz (typically using inductors at less than 1/3 to 1/2 of SRF). The 280mA rated current and 0.51Ω DCR are suitable for RF signal paths with moderate current levels.

Working Principle: LQW18AN62NG00D Working Principle

The LQW18AN62NG00D uses a wirewound construction where a fine insulated copper wire is wound around a ferrite core in a precision winding pattern. The ferrite core increases the inductance per unit volume compared to an air-core design, enabling 62nH in a compact 0603 package. The wirewound construction provides much higher Q factor than multilayer (thick-film) inductors because: (1) the wound wire has lower resistance than the thick-film electrode, (2) the ferrite core concentrates the magnetic flux, and (3) the wire spacing can be optimized for low parasitic capacitance. The self-resonant frequency (SRF) of 2.3GHz is determined by the parallel resonance of the inductance and the parasitic capacitance between windings. Above the SRF, the component behaves as a capacitor. The ±2% tolerance is achieved through precision winding equipment and laser trimming of the wire length.

Pin Description: LQW18AN62NG00D Pin Definition and Functions
Pin Name Type Function
1 Terminal 1 Passive One end of wirewound coil
2 Terminal 2 Passive Other end of wirewound coil
Application Scenarios: In which products and applications is LQW18AN62NG00D used
  • 2.4GHz Bluetooth PA output 62nH matching inductor in L-network for 50Ω impedance
  • GPS L1 (1575MHz) LNA input 62nH matching inductor with Q=38 for low noise figure
  • UHF (400-500MHz) VCO tank inductor 62nH for stable oscillation frequency
  • Cellular (700-900MHz) RF front-end 62nH matching inductor for antenna switch module
  • Wi-Fi 2.4GHz LNA output 62nH inductor in Pi-network for impedance transformation
Alternative Models: What chips are recommended as replacements for LQW18AN62NG00D
Manufacturer Part Number Package Notes
Murata LQW18AN62NJ00D 0603 62nH ±5% version (lower cost)
Murata LQW18AN68NG00D 0603 68nH ±2% next value up
Coilcraft 0603CS-62NXJLU 0603 62nH ±5% wirewound
Taiyo Yuden HK100562NJ-T 0603 62nH ±5% wirewound
Murata LQG18HN62NG00D 0603 62nH ±2% multilayer (lower Q)

Recommend Parts

ISL95855HRTZ-T

IMVP8 3+2+1 phase buck controller, R3 technology, 4.5-25V input, 48-TQFN

Brand: Renesas

Package: 48-TQFN (6×6 mm, exposed pad)

IN STOCK: 2156pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4019PBF

150V N-Channel HEXFET Power MOSFET, 47A, 34 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 2409pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSP430F247TPMR

TI MSP430 MCU, 16-bit RISC, 92KB Flash, 8KB RAM, 16MHz, LQFP-64

Package: See datasheet

IN STOCK: 13371pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1