Opens in a new tab

LT3045EDD

Ultra Low Noise LDO, 0.8nV/√Hz, 500mA, 78dB PSRR @ 1MHz, DFN-10

11826

Effective Inventory

Image for reference only

Manufacturer Part:

LT3045EDD

Package:

10-Lead DFN (3 x 2 x 0.75 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LT3045EDD is an ultra-low noise, ultra-high PSRR (power supply rejection ratio) linear regulator from Analog Devices, designed specifically for noise-sensitive RF, microwave, and high-speed data converter applications. Delivering up to 500mA of output current with only 0.8µV RMS output noise (10Hz to 100kHz) and 78dB PSRR at 1MHz, this device sets industry benchmarks for clean power delivery. The LT3045 operates from 1.8V to 15V input with an adjustable output from 0V to 13.2V using a single external resistor. Supplied in a compact 10-lead DFN package, it is ideal for powering sensitive analog circuitry in communications, medical, test & measurement, and aerospace systems.

Key Specifications

Parameter Value
Manufacturer Analog Devices
Part Number LT3045EDD
Product Category Ultra-Low Noise LDO Regulators
Output Type Adjustable (single resistor)
Input Voltage Range 1.8V to 15V
Output Voltage Range 0V to 13.2V
Output Current 500mA
Output Noise 0.8µV RMS (10Hz to 100kHz)
PSRR 78dB at 1MHz
Dropout Voltage 260mV typical @ 500mA
Package / Case 10-Lead DFN (3×2mm)
Operating Temperature -40°C to +125°C

Features

  • Ultra-low output noise: 0.8µV RMS (10Hz to 100kHz)
  • Ultra-high PSRR: 78dB at 1MHz
  • 500mA output current capability
  • Wide input voltage: 1.8V to 15V
  • Adjustable output: 0V to 13.2V with single resistor
  • Low dropout: 260mV typical at 500mA
  • Low quiescent current: 2.5mA operating, 0.5mA shutdown
  • Programmable current limit
  • Precision enable threshold for power sequencing
  • Ceramic output capacitor stable (Bypass mode)
  • Reverse battery and reverse current protection
  • Thermal overload and short-circuit protection

Applications

  • RF and microwave circuits
  • High-speed data converters (ADC/DAC)
  • PLLs, VCOs, and mixer circuits
  • Medical equipment and imaging systems
  • Test and measurement instrumentation
  • Post-regulation of switching power supplies
Product Introduction: LT3045EDD Product Introduction

The LT3045EDD is an ultra-low noise, ultra-high PSRR linear regulator from Analog Devices, representing the state-of-the-art in clean power delivery for noise-sensitive analog and RF circuits. This device is part of ADI’s LTC precision power management portfolio, engineered to provide exceptionally quiet supply rails for the most demanding applications.

What makes the LT3045 exceptional is its extraordinary noise and rejection performance. With just 0.8µV RMS output noise integrated from 10Hz to 100kHz and a spectral noise density as low as 0.8nV/√Hz at high frequencies, this regulator produces one of the cleanest output voltages available in a monolithic LDO. Even more impressive is its PSRR (power supply rejection ratio) of 78dB at 1MHz — far exceeding traditional LDOs that typically roll off their rejection above 100kHz. This makes the LT3045 highly effective at cleaning up high-frequency ripple from switching power supplies.

The LT3045 operates from 1.8V to 15V input and provides an adjustable output from 0V to 13.2V using a single SET resistor. Unlike traditional LDOs that use a resistive divider (which adds noise), the LT3045 uses a current-reference architecture where a precise 50µA current flows through an external resistor to set the output voltage. This approach, combined with internal noise filtering, achieves the ultra-low noise performance.

Additional features include programmable current limit, precision enable threshold, output noise reduction via an external bypass capacitor, comprehensive protection features (reverse battery, reverse current, thermal shutdown, short-circuit), and stability with ceramic output capacitors.

Working Principle: LT3045EDD Working Principle

The LT3045 employs several innovative techniques to achieve its industry-leading noise and PSRR performance:

1. Current-Reference Architecture: Unlike traditional LDOs that use a voltage reference and resistive divider, the LT3045 uses a precision 50µA current reference. This current flows out of the SET pin through an external resistor R_SET, establishing the output voltage: VOUT = 50µA × R_SET. This architecture eliminates the noise contribution of a resistor divider network.

2. Low-Noise Bandgap Reference: An advanced bandgap reference generates the reference current with extremely low noise. Special circuit techniques, including chopper stabilization and noise filtering, minimize the reference noise to the nanovolt level.

3. High-PSRR Error Amplifier: The error amplifier is designed with multiple gain stages and advanced frequency compensation to maintain high power supply rejection ratio even at high frequencies (up to and beyond 1MHz). This is achieved through careful design of the power supply rejection at each stage.

4. PNP Pass Element: A PNP (or PMOS) pass transistor provides the series regulation. The P-type device allows low dropout voltage and good high-frequency performance. The dropout voltage at 500mA is typically 260mV.

5. Noise Reduction (NR) Pin: An external capacitor connected to the NR pin filters the reference voltage, further reducing output noise. Larger NR capacitors reduce noise down to the 0.8µV RMS level but increase start-up time.

6. Protection Features: The LT3045 includes reverse battery protection (diode in series with input), reverse current protection (prevents current from flowing backward from output to input), programmable current limit (set by a single resistor), and thermal shutdown.

7. Stability: The device is stable with ceramic output capacitors, which are preferred for low ESR and small size. A minimum output capacitance ensures stability across the full operating range.

Pin Description: LT3045EDD Pin Definition and Functions
Pin Name Type Description
1 IN Power Input Input voltage supply (1.8V to 15V). Bypass with low-ESR ceramic capacitor to GND, placed close to pin.
2 EN/UVLO Input Enable / undervoltage lockout. Drive above 1.22V to enable. Pull below 0.4V to shut down. Precision threshold allows accurate UVLO programming via resistor divider.
3 ILIM Input Current limit programming. Resistor to GND sets current limit. Connect to IN for default 700mA. Ground pin for 0.6A limit.
4 SET Output Voltage set pin. Connect resistor from SET to GND to set output voltage: VOUT = 50µA × R_SET. Also serves as error amplifier input.
5 NR Input Noise reduction pin. Connect capacitor from NR to GND to filter reference noise. 10nF typical for ultra-low noise operation.
6 GND Ground Signal and power ground. Provide robust connection to ground plane.
7 GND Ground Additional ground pin for thermal and low-impedance current return.
8 OUT Output Regulated output voltage. Connect output capacitor (typically 10µF ceramic) and load here.
9 OUT Output Second output pin. Connected internally to Pin 8. Both pins connected externally for low resistance.
10 OUTS Output Sense Output sense pin. Kelvin-sense connection for the error amplifier feedback. Connect directly to the output capacitor at the load side for best load regulation.
Application Scenarios: In which products and applications is LT3045EDD used
  • RF transmitter/receiver power supplies for low phase noise
  • High-speed ADC and DAC reference and analog supply rails
  • Low-jitter PLL and VCO power in communications equipment
  • Medical imaging devices (MRI, ultrasound) requiring clean power
  • High-end audio and professional audio equipment
  • Post-regulation for switching supplies feeding sensitive analog circuits
Alternative Models: What chips are recommended as replacements for LT3045EDD
Manufacturer Part Number Package Notes
Analog Devices LT3045EMSE MSOP-12 Same device in MSOP-12 package
Analog Devices LT3042 DFN-6 200mA lower current version
Analog Devices LT3094 DFN-12 Negative output ultra-low noise LDO
Texas Instruments TPS7A4700 QFN-20 1A ultra-low noise LDO alternative
Texas Instruments TPS7A8300 QFN-20 2A ultra-low-noise option
Maxim Integrated MAX38903 TDFN 500mA low-noise LDO option

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1