Opens in a new tab

LT3092EST#PBF

200mA two-terminal programmable current source, 1.2-40V, 1% accuracy in SOT-223

7025

Effective Inventory

Image for reference only

Manufacturer Part:

LT3092EST#PBF

Package:

SOT-223-3 (6.5 x 3.5 x 1.6mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LT3092EST#PBF from Analog Devices is a 200mA two-terminal programmable current source. It operates from 1.2V to 40V input with only 300uA supply current and features 1% initial SET pin current accuracy, making it ideal for precision current sourcing applications in SOT-223 package.

Key Specifications

Output Current Range 0.5mA to 200mA
Input Voltage Range 1.2V to 40V
Initial Accuracy (SET) 1%
Supply Current 300 uA (typ)
Current Regulation <0.001%/V
Thermal Regulation 0.002%/W
Operating Temperature -40 to 125 C
Package SOT-223-3

Features

  • Two-terminal operation: floating current source
  • 1% initial current accuracy at SET pin
  • No output capacitor required
  • Reverse voltage protection
  • Current limit and thermal shutdown

Applications

  • LED current regulation and biasing
  • 4-20mA current loop drivers
  • Battery charging current sources
  • Sensor bias current generation
  • Intrinsically safe current limiters
Product Introduction: LT3092EST#PBF Product Introduction

The LT3092EST#PBF from Analog Devices is a high-performance two-terminal programmable current source that operates from 1.2V to 40V and delivers up to 200mA of output current. The device requires only one external resistor to set the output current, with 1% initial accuracy at the SET pin. As a true two-terminal device, it can be used as either a high-side or low-side current source without any ground reference. The device features reverse-battery protection, current limiting, and thermal shutdown, eliminating the need for external protection diodes in most applications.

Working Principle: LT3092EST#PBF Working Principle

The LT3092EST#PBF operates as a precision two-terminal current source using an internal 10uA reference current. **Current Setting**: An internal precision 10uA current flows out of the SET pin through an external resistor RSET. The voltage developed across RSET is buffered and applied to the output, forcing the same 10uA x RSET voltage across an internal 10 Ohm sense resistor, which sets the output current to IOUT = 10uA x RSET / 10 Ohm. **Two-Terminal Operation**: The device operates between its IN and OUT terminals. Current flows from IN through the internal pass transistor and sense resistor to OUT. The minimum operating voltage is 1.2V (IN to OUT), and the device can withstand up to 40V. **Protection Subsystem**: Reverse-battery protection prevents damage when input polarity is reversed. Internal current limiting and thermal shutdown protect against fault conditions. The device requires no output capacitor for stability.

Pin Description: LT3092EST#PBF Pin Definition and Functions
Pin Name Description
1 OUT Current source output terminal
2 IN Input supply terminal (1.2V to 40V)
3 SET Current set pin (connect RSET to OUT)
Tab OUT Thermal tab, electrically connected to OUT
Application Scenarios: In which products and applications is LT3092EST#PBF used
  • LED Biasing: Precision constant-current drive for high-power LEDs in lighting and display applications
  • 4-20mA Loops: Industrial current-loop transmitters for sensor signal transmission
  • Battery Charging: Constant-current phase of Li-ion and NiMH battery chargers
  • Sensor Bias: Stable current excitation for resistive sensors (RTDs, strain gauges)
  • Intrinsic Safety: Current-limited circuits for hazardous environment equipment
Alternative Models: What chips are recommended as replacements for LT3092EST#PBF
Model Manufacturer Key Difference
LM334Z TI 3-terminal, 1uA-10mA, TO-92
REF200AU TI Dual 100uA current source, SOIC-8
CRD2012-R10 TOSHIBA Fixed 10mA, 2-terminal CRD
NSI45020T1G onsemi 20mA, 45V, 2-terminal, SOD-123
AL5809-20P1-7 Diodes Inc 20mA, 50V, 2-terminal LED driver

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1