Opens in a new tab

LTC6101HVBHS5

105V Current Sense Amp, +/-0.3% Gain, SOT-23-5, HV Industrial

2345

Effective Inventory

Image for reference only

Manufacturer Part:

LTC6101HVBHS5

Package:

SOT-23-5 (2.9 x 1.6 x 1.0 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LTC6101HVBHS5 from Analog Devices is a high-voltage current sense amplifier with 105V maximum operating voltage, +/-0.3% gain accuracy, and 1 uV/C offset drift in a SOT-23-5 package.

Key Specifications

Type High-Voltage Current Sense Amplifier
Common-Mode Voltage Range 4 V to 105 V
Gain Accuracy +/-0.3% (max)
Offset Voltage 500 uV (max)
Offset Drift 1 uV/C (typical)
Input Bias Current 50 nA (max)
Supply Current 350 uA (typical)
Bandwidth 2.5 MHz
Supply Voltage 4 V to 105 V (or independent 2.7-5.5V)
Package SOT-23-5
Operating Temperature -40C to +125C (HV version)

Features

  • 105V maximum operating common-mode voltage
  • +/-0.3% maximum gain accuracy
  • 1 uV/C typical offset drift
  • 2.5 MHz bandwidth for fast current sensing
  • Can be powered from the sense voltage or independent supply
  • Low 350 uA supply current
  • Current output for flexible gain setting

Applications

  • High-side current sensing in 48V systems
  • Battery management current monitoring
  • Motor drive current feedback
  • Telecom -48V power supply monitoring
Product Introduction: LTC6101HVBHS5 Product Introduction

The LTC6101HVBHS5 from Analog Devices is a high-voltage current sense amplifier that operates with common-mode voltages from 4V to 105V. The device provides +/-0.3% maximum gain accuracy and 1 uV/C typical offset drift for precision current measurement in high-voltage systems. The unique architecture uses an external output resistor to set the gain, providing flexibility for different current ranges. The 2.5 MHz bandwidth supports fast current sensing for motor control and overcurrent protection. The HV version is specified over the extended -40C to +125C temperature range. The device can be powered directly from the high-voltage bus or from an independent 2.7V to 5.5V supply, enabling current measurement even when the main supply is off.

Working Principle: LTC6101HVBHS5 Working Principle

The LTC6101HVBHS5 uses a current-feedback architecture where the internal amplifier forces a current through the external gain-setting resistor that is proportional to the shunt voltage. The shunt voltage (VSHUNT = ILOAD x RSHUNT) appears across the IN+ and IN- pins. The internal amplifier drives an output transistor to source current through the external output resistor (ROUT), producing an output voltage VOUT = IOUT x ROUT. The output current is precisely proportional to the shunt voltage: IOUT = VSHUNT / RIN, where RIN is the external input resistor. The overall voltage gain is VOUT/VSHUNT = ROUT/RIN. The high-voltage capability comes from using high-voltage transistors in the input stage that can withstand up to 105V common-mode. The amplifier does not require a low-voltage supply; it can be powered from the same high-voltage bus through an internal shunt regulator that generates the internal 2.7V supply from the V+ pin. The current-output architecture provides inherent noise filtering and allows the output voltage to be referenced to any voltage within the output compliance range.

Pin Description: LTC6101HVBHS5 Pin Definition and Functions
Pin Name Type Function
1 V- Input Negative sense input (shunt low side)
2 V+ Input/Power Positive sense input / supply (4-105V)
3 VOUT Output Current output (to ROUT)
4 VS- Power Negative supply (usually GND)
5 VS+ Power Independent supply (2.7-5.5V, optional)
Application Scenarios: In which products and applications is LTC6101HVBHS5 used
  • 48V Li-ion battery pack high-side current monitoring for BMS
  • Telecom -48V power plant current measurement with ground-referenced output
  • 100V DC motor drive phase current feedback
  • Solar inverter DC bus current monitoring at up to 105V
Alternative Models: What chips are recommended as replacements for LTC6101HVBHS5
Manufacturer Part Number Package Notes
ADI LTC6102HVBHS5 SOT-23-5 Lower offset (10uV), same HV
TI INA240A1EDRQ1 VSSOP-8 80V CM, automotive, PWM reject
TI INA282AIDR SOIC-8 80V CM, 50 V/V gain, lower cost
ADI AD8418AWHRZ SOIC-8 80V CM, automotive, bidirectional
TI INA293A1QDRQ1 VSSOP-8 110V CM, automotive, 20 V/V

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1