Opens in a new tab

Home » Integrated Circuits ICs, MOSFETs » LXES15AAA1-133

LXES15AAA1-133

MLV varistor, ~13V, 0402/0603, -40 to 85C

2701

Effective Inventory

Image for reference only

Manufacturer Part:

LXES15AAA1-133

Package:

0402 / 0603

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LXES15AAA1-133 is a chip varistor (MLV) for transient voltage suppression. ESD and surge protection for automotive and industrial interfaces.

Key Specifications

Type Chip Multilayer Varistor (MLV)
Varistor Voltage ~13V typ
Clamping Voltage ~22V @ 1A
Energy Rating ~0.5J
Capacitance ~150pF typ
Operating Temp -40 to +85C
Package 0402 / 0603

Features

  • Multilayer varistor ESD protection
  • ~13V varistor voltage
  • Low capacitance (~150pF)
  • Compact 0402/0603 footprint
  • Bidirectional clamping
  • RoHS compliant

Applications

  • ESD protection for I/O lines
  • Automotive sensor ESD
  • Industrial interface surge
  • Low-speed data line protection
Product Introduction: LXES15AAA1-133 Product Introduction

The LXES15AAA1-133 is a chip multilayer varistor (MLV) for ESD and surge protection. ~13V varistor voltage clamps transients to ~22V at 1A. Bidirectional operation protects against both positive and negative transients. Lower cost than TVS diodes for moderate-speed interfaces where ~150pF capacitance is acceptable.

Working Principle: LXES15AAA1-133 Working Principle

Zinc oxide (ZnO) ceramic grains with grain boundary barriers act as back-to-back diodes at each grain boundary. Below the varistor voltage, the boundaries are insulating. Above it, the boundaries break down and conduct, clamping the voltage. The nonlinear V-I characteristic (I ~ V^alpha, alpha~25) provides very sharp clamping.

Pin Description: LXES15AAA1-133 Pin Definition and Functions
Terminal Name Description
1 T1 Varistor
2 T2 Varistor
Application Scenarios: In which products and applications is LXES15AAA1-133 used
  • I/O ESD protect
  • Auto sensor ESD
  • Interface surge
Alternative Models: What chips are recommended as replacements for LXES15AAA1-133
Model Manufacturer Key Difference

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1