Opens in a new tab

LY62256SL-70LL

256Kb 3.3V low-power SRAM, 32Kx8, 70ns, parallel, ultra-low standby

9876

Effective Inventory

Image for reference only

Manufacturer Part:

LY62256SL-70LL

Package:

TSOP / SOP

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LY62256SL-70LL is a 256Kbit (32K x 8-bit) Low-Power CMOS Static RAM from Lyontek Inc. operating at 3.0V to 3.6V with 70 ns access time. It provides fully static operation with no clocks or refresh required, byte-wide I/O, and data byte control via LB# and UB# signals for x16 variants. The LL (Low-power Low-voltage) variant features ultra-low standby current.

Key Specifications

Density 256Kbit (32K x 8)
Supply Voltage 3.0V to 3.6V
Access Time 70 ns
Interface Parallel asynchronous
Operating Current ~5 mA typical
Standby Current ~2 µA typical
Operating Temp 0°C to +70°C
Package TSOP / SOP
Part Status Active

Features

  • 256Kbit low-power CMOS SRAM
  • Single 3.0V to 3.6V supply
  • Fully static operation — no refresh or clocks
  • TTL-compatible I/O
  • Ultra-low standby current for battery backup
  • Data retention voltage down to 1.5V

Applications

  • Battery-backed memory
  • Embedded system SRAM expansion
  • Industrial control systems
  • Networking equipment buffer
Product Introduction: LY62256SL-70LL Product Introduction

The LY62256SL-70LL is a 256Kbit (32K x 8-bit) low-power CMOS static RAM from Lyontek Inc. operating at 3.0V to 3.6V with 70 ns access time. The device provides fully static operation requiring no clocks or refresh, with TTL-compatible I/O and ultra-low standby current suitable for battery-backed applications. Data retention is maintained down to 1.5V supply.

Working Principle: LY62256SL-70LL Working Principle

The LY62256 is a fully static asynchronous SRAM. Six-transistor CMOS memory cells retain data without refresh. Read: CE# low, OE# low — data appears on I/O after access time. Write: CE# low, WE# low — data is written to the addressed location. Standby: CE# high — ultra-low power mode with microampere-level current, supporting battery backup.

Pin Description: LY62256SL-70LL Pin Definition and Functions
Pin Group Interface Function
A0-A14 Input 15-bit address inputs
I/O0-I/O7 I/O 8-bit data bus
CE# Input Chip enable
OE# Input Output enable
WE# Input Write enable
Application Scenarios: In which products and applications is LY62256SL-70LL used
  • Battery-backed configuration memory
  • Low-power MCU SRAM expansion
  • Industrial control buffer storage
Alternative Models: What chips are recommended as replacements for LY62256SL-70LL
Manufacturer Part Number Package Notes
ISSI IS62LV256AL TSOP 3.3V 256K SRAM
Renesas R1LP5256ESA-5SI#B1 TSOP 5V 256K alternative

Recommend Parts

ISL95855HRTZ-T

IMVP8 3+2+1 phase buck controller, R3 technology, 4.5-25V input, 48-TQFN

Brand: Renesas

Package: 48-TQFN (6×6 mm, exposed pad)

IN STOCK: 2156pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4019PBF

150V N-Channel HEXFET Power MOSFET, 47A, 34 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 2409pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSP430F247TPMR

TI MSP430 MCU, 16-bit RISC, 92KB Flash, 8KB RAM, 16MHz, LQFP-64

Package: See datasheet

IN STOCK: 13371pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1