Opens in a new tab

Home » Integrated Circuits ICs » LY62L205016BLL-55SLI

LY62L205016BLL-55SLI

32Mb low-power SRAM, 2Mx16/4Mx8 switchable, 2.7~3.6V, 55ns, 10uA standby, 48-TSOP-I, industrial

4321

Effective Inventory

Image for reference only

Manufacturer Part:

LY62L205016BLL-55SLI

Package:

48-pin TSOP-I (12 x 20mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LY62L205016BLL-55SLI is a 32Mbit (2M x 16 / 4M x 8 switchable) low-power CMOS SRAM from Lyontek Inc., operating at 2.7V to 3.6V with 55 ns access time. It features byte/word switchable organization via BYTE# pin, ultra-low standby current (10uA typ.), and data retention down to 1.2V. Packaged in a 48-pin TSOP-I (12 x 20mm), it is qualified for industrial temperature range (-40°C to +85°C).

Key Specifications

Density 32Mbit
Organization 2M x 16 / 4M x 8 (switchable)
Supply Voltage 2.7V to 3.6V
Access Time 55 ns
Interface Parallel asynchronous
Operating Current 45 mA typ.
Standby Current 10 uA typ. (SL version)
Data Retention Voltage 1.2V min.
Byte Control LB#, UB#, BYTE#
Operating Temp -40°C to +85°C (industrial)
Package 48-pin TSOP-I (12 x 20mm)
Part Status Active

Features

  • 32Mbit low-power CMOS SRAM with switchable x16/x8 organization
  • 2.7V to 3.6V single power supply
  • 55 ns access time
  • BYTE# pin selects x16 (word) or x8 (byte) mode
  • Ultra-low standby current: 10uA typical (SL version)
  • Data retention voltage down to 1.2V for battery backup
  • Fully static operation, no refresh or clocks required
  • TTL-compatible inputs and outputs
  • Three-state output
  • Data byte control: LB# (DQ0-DQ7), UB# (DQ8-DQ15)
  • Industrial temperature grade

Applications

  • Battery-backed memory systems
  • Industrial and medical equipment
  • POS terminals and networking
  • Automotive electronics
  • Embedded system SRAM expansion
Product Introduction: LY62L205016BLL-55SLI Product Introduction

The LY62L205016BLL-55SLI is a 32Mbit low-power CMOS SRAM from Lyontek Inc. with switchable organization: 2M x 16 (word mode) or 4M x 8 (byte mode) via the BYTE# pin. Operating at 2.7V to 3.6V with 55 ns access time, it features ultra-low standby current of 10uA typical (SL version) and data retention down to 1.2V, making it ideal for battery-backed applications. The device supports byte-level control via LB# and UB# signals in word mode, and uses DQ15 as an additional address pin (A-1) in byte mode. Packaged in 48-pin TSOP-I for industrial temperature range.

Working Principle: LY62L205016BLL-55SLI Working Principle

The LY62L205016 is a fully static asynchronous SRAM with switchable bus width. In word mode (BYTE# = VCC): 2M x 16 organization, A0-A20 provide 21 address bits, DQ0-DQ15 are 16-bit data, LB#/UB# control lower/upper byte access. In byte mode (BYTE# = VSS): 4M x 8 organization, DQ15/A-1 becomes the least significant address bit, DQ0-DQ7 carry 8-bit data, DQ8-DQ14 are unused. Read: CE# low, OE# low — data appears after 55ns. Write: CE# low, WE# low — data is written to addressed location. Standby: CE# high — ultra-low 10uA current. Data retention at VCC down to 1.2V enables battery backup operation. The six-transistor CMOS cell design requires no refresh.

Pin Description: LY62L205016BLL-55SLI Pin Definition and Functions
Pin Group Name Type Function
A0-A20 (word) / A-1-A20 (byte) Address Inputs Input 21-bit (word) or 22-bit (byte) address
DQ0-DQ7 Lower Byte I/O I/O Data bits 0-7 (both modes)
DQ8-DQ14 Upper Byte I/O I/O Data bits 8-14 (word mode only, unused in byte mode)
DQ15 / A-1 Dual Function I/O / Input Data bit 15 (word mode) / Address LSB (byte mode)
CE# Chip Enable Input Activates device, active low
OE# Output Enable Input Enables data output, active low
WE# Write Enable Input Enables write, active low
LB# Lower Byte Enable Input Enables DQ0-DQ7 (word mode)
UB# Upper Byte Enable Input Enables DQ8-DQ15 (word mode)
BYTE# Byte/Word Select Input VCC = word mode (x16), VSS = byte mode (x8)
VCC Power Power 2.7V to 3.6V supply
VSS Ground Power Ground
Application Scenarios: In which products and applications is LY62L205016BLL-55SLI used
  • Battery-backed industrial data storage with 4MB capacity
  • Medical device configuration and patient data memory
  • POS terminal transaction buffer
  • Automotive ECU non-volatile-when-powered storage
  • Networking equipment lookup table and buffer
Alternative Models: What chips are recommended as replacements for LY62L205016BLL-55SLI
Manufacturer Part Number Package Notes
Lyontek LY62L204916BGL-55SLI 48-TSOP-I 32Mb variant, different pinout
ISSI IS62WV3216EBLL-45TLI 44-TSOP II 32Mb 45ns low-power SRAM
Lyontek LY62L409816ALL-55SLI 48-TSOP-I 64Mb upgrade, same family
Cypress CY62167EV30LL-45ZSXI 48-TSOP-I 16Mb low-power alternative

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1