Opens in a new tab

Home » Analog Linear ICs, Integrated Circuits ICs » LY62L51216BML-45SLI

LY62L51216BML-45SLI

8Mb (512Kx16) ultra-low-power SRAM, 2.7~3.6V, 45ns, byte ctrl, 44-TSOP II

4567

Effective Inventory

Image for reference only

Manufacturer Part:

LY62L51216BML-45SLI

Package:

44-pin TSOP II (400mil)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LY62L51216BML-45SLI is an 8Mbit (512K x 16-bit) ultra-low-power CMOS SRAM from Lyontek Inc. operating at 2.7V to 3.6V with 45 ns access time. It features upper/lower byte control (LB#, UB#), data retention down to 1.5V, and standby current as low as 2.5 µA typical, making it ideal for battery-backed applications.

Key Specifications

Density 8Mbit (512K x 16)
Supply Voltage 2.7V to 3.6V
Access Time 45 ns
Interface Parallel asynchronous
Byte Control LB#, UB#
Operating Current 12 mA typical
Standby Current 2.5 µA typical
Data Retention 1.5V min
Operating Temp -40°C to +85°C
Package 44-pin TSOP II
Part Status Active

Features

  • 8Mbit (512K x 16) ultra-low-power SRAM
  • 45 ns access time
  • Upper/lower byte control (LB#, UB#)
  • Ultra-low standby current (2.5 µA typical)
  • Data retention voltage down to 1.5V
  • Fully static, no refresh or clocks

Applications

  • Battery-backed memory systems
  • Industrial and telecom SRAM
  • Embedded system expansion
Product Introduction: LY62L51216BML-45SLI Product Introduction

The LY62L51216BML-45SLI is an 8Mbit (512K x 16-bit) ultra-low-power CMOS SRAM from Lyontek Inc. operating at 2.7V to 3.6V with 45 ns access time. It features byte-wise control via LB# and UB# signals, data retention down to 1.5V, and ultra-low 2.5 µA typical standby current, making it excellent for battery-backed and low-power embedded applications.

Working Principle: LY62L51216BML-45SLI Working Principle

Fully static asynchronous SRAM with 16-bit data bus. LB# and UB# signals control individual byte lanes. Data retention at 1.5V enables battery backup operation. The internal memory array uses six-transistor CMOS cells for non-volatile-when-powered storage without refresh.

Pin Description: LY62L51216BML-45SLI Pin Definition and Functions
Pin Group Interface Function
A0-A18 Input 19-bit address inputs
DQ0-DQ7 I/O Lower byte data
DQ8-DQ15 I/O Upper byte data
CE#, OE#, WE# Input Control signals
LB#, UB# Input Byte enable
Application Scenarios: In which products and applications is LY62L51216BML-45SLI used
  • Battery-backed industrial data storage
  • Low-power embedded SRAM expansion
  • Telecom packet buffer
Alternative Models: What chips are recommended as replacements for LY62L51216BML-45SLI
Manufacturer Part Number Package Notes
ISSI IS61WV51216EDBLL-10TLI TSOP 10ns high-speed 512Kx16
Lyontek LY62L51216ML-70LLI TSOP 70ns slower variant

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1