Opens in a new tab

M25PE80-VMN6TP

8Mbit SPI flash, 50MHz, SOIC-8, page/sector erase, WP/hold, 20yr retention

5859

Effective Inventory

Image for reference only

Manufacturer Part:

M25PE80-VMN6TP

Package:

SOIC-8 (4.90 x 3.90 x 1.37 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The M25PE80-VMN6TP from STMicroelectronics is an 8Mbit (1Mx8) SPI serial flash memory with page erase in a SOIC-8 package. With 50MHz SPI clock and 256-byte page programming, it provides reliable non-volatile storage for firmware and data.

Key Specifications

Memory Size 8 Mbit (1,048,576 x 8 bit)
Interface SPI (50 MHz max)
Page Size 256 bytes
Sector Size 64 KB (page erase also supported)
Endurance 100,000 erase/write cycles
Data Retention 20 years
Operating Temperature -40C to +85C

Features

  • 8Mbit SPI flash with 50MHz clock for reliable firmware storage
  • Page erase (256B) and sector erase (64KB) for flexible data management
  • 256-byte page programming in 2ms typical
  • Write protection with sector lock-down and hardware WP pin
  • Hold pin for pausing serial communication
  • Deep power-down mode for low-power applications

Applications

  • Microcontroller firmware and boot code storage
  • Industrial equipment parameter storage
  • Consumer electronics configuration data
  • Communication module firmware storage
Product Introduction: M25PE80-VMN6TP Product Introduction

The M25PE80-VMN6TP from STMicroelectronics is an 8Mbit (1M x 8) serial flash memory with SPI interface in a SOIC-8 package. The device supports SPI clock frequencies up to 50MHz for firmware execution and data access. The memory is organized as 16 sectors of 64KB each, with 256-byte page programming capability. A unique feature of the M25PE series is support for both page erase (256 bytes) and sector erase (64KB), providing fine-grained data management not available in many SPI flash devices that only support sector or block erase. Page programming time is typically 2ms, and page erase time is typically 20ms. Write protection features include individual sector lock-down, hardware write protect (W) pin, and write-enable latch. The hold (HOLD) pin allows the SPI communication to be paused without resetting the device, useful for shared SPI bus applications. Deep power-down mode reduces current consumption to below 5uA for battery-powered applications.

Working Principle: M25PE80-VMN6TP Working Principle

The M25PE80-VMN6TP uses NOR flash memory with SPI serial interface. (1) Memory Array: The 8Mbit storage is organized as 1,048,576 bytes in 16 sectors of 65,536 bytes (64KB) each. Each sector contains 256 pages of 256 bytes. (2) SPI Protocol: Commands, addresses, and data are transferred serially via the SPI bus (S, Q, D, C pins). The device supports SPI mode 0 and mode 3. (3) Read: The READ command outputs data starting at the specified address at up to 50MHz. (4) Program: Page programming writes up to 256 bytes in one operation. The WREN command must be issued before programming. (5) Erase: The unique page erase feature clears one 256-byte page to all 1s, useful when only a small amount of data needs updating. Sector erase clears one 64KB sector. Bulk erase clears the entire array. (6) Protection: Block protect bits in the status register define protected address ranges. The W pin provides hardware write protection.

Pin Description: M25PE80-VMN6TP Pin Definition and Functions
Pin Name Type Function
1 S Input Chip select (active low)
2 Q Output Data output (MISO)
3 W Input Write protect (active low)
4 VSS Ground Ground
5 D Input Data input (MOSI)
6 C Input SPI clock
7 HOLD Input Hold (pauses communication)
8 VDD Power Supply (2.7V to 3.6V)
Application Scenarios: In which products and applications is M25PE80-VMN6TP used
  • Microcontroller firmware and boot code storage at 50MHz SPI
  • Industrial equipment parameter storage with page erase flexibility
  • Consumer electronics configuration data with 20-year retention
  • Communication module firmware storage with deep power-down
Alternative Models: What chips are recommended as replacements for M25PE80-VMN6TP
Manufacturer Part Number Package Notes
ST M25P16-VMN6TP SOIC-8 16Mbit, same family
Macronix MX25L8006EM2I-12G SOIC-8 8Mbit, 120MHz
Winbond W25Q80DVSSIG SOIC-8 8Mbit, 104MHz, dual
Microchip SST25VF080B-50-4I-S2AF SOIC-8 8Mbit, 50MHz

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1