Opens in a new tab

Home » Integrated Circuits ICs » M74VHC1GT125DT1G

M74VHC1GT125DT1G

Single 3-state buffer, 5V-tolerant, SOT-353

4920

Effective Inventory

Image for reference only

Manufacturer Part:

M74VHC1GT125DT1G

Package:

SOT-353

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The M74VHC1GT125DT1G from onsemi is a single bus buffer/line driver with 3-state output in an ultra-compact SOT-353 package. 5V-tolerant inputs allow level translation from 5V to 3.3V domains. The active-low output enable provides tri-state for bus sharing.

Key Specifications

Function Single bus buffer with 3-state output
Supply Voltage 2.0V to 5.5V
Propagation Delay 3.0 ns at 3.3V
Output Drive ±8 mA at 3.3V
Input Tolerant 5.5V
Package SOT-353 (2.1×1.3mm)

Working Principle

When OE is LOW, the output follows the input (Y = A). When OE is HIGH, the output is in high-impedance (tri-state), allowing other devices to drive the bus. 5V-tolerant inputs accept signals above VCC, enabling mixed-voltage interfacing without damage.

Applications

  • Bus buffering with tri-state
  • 5V to 3.3V level translation
  • I/O port isolation
  • Glue logic
Product Introduction: M74VHC1GT125DT1G Product Introduction

The M74VHC1GT125DT1G from onsemi is a single bus buffer/line driver with 3-state output in an ultra-compact SOT-353 package. 5V-tolerant inputs allow level translation from 5V to 3.3V domains. The active-low output enable provides tri-state for bus sharing.

Working Principle: M74VHC1GT125DT1G Working Principle

When OE is LOW, the output follows the input (Y = A). When OE is HIGH, the output is in high-impedance (tri-state), allowing other devices to drive the bus. 5V-tolerant inputs accept signals above VCC, enabling mixed-voltage interfacing without damage.

Pin Description: M74VHC1GT125DT1G Pin Definition and Functions
Pin Name Description
1 OE Output enable (active low)
2 A Input
3 GND Ground
4 Y Output
5 VCC Supply
Application Scenarios: In which products and applications is M74VHC1GT125DT1G used
  • Bus buffering with tri-state
  • 5V to 3.3V level translation
  • I/O port isolation
  • Glue logic
Alternative Models: What chips are recommended as replacements for M74VHC1GT125DT1G
Model Manufacturer Key Difference
74LVC1G125 Nexperia Equivalent

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1