Opens in a new tab

MAX232N

Dual RS-232 driver/receiver, 5V, 120kbps, charge pump, PDIP-16

13986

Effective Inventory

Image for reference only

Manufacturer Part:

MAX232N

Package:

PDIP-16 (19.3 x 6.35 mm, 2.54mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The MAX232N from Texas Instruments is the industry-standard dual RS-232 driver/receiver with integrated charge pump, operating from single 5V supply in 16-pin DIP package.

Key Specifications

Manufacturer Texas Instruments
Protocol RS-232 / TIA/EIA-232
Drivers 2
Receivers 2
Data Rate 120 kbps
Supply Voltage 5V single supply
Supply Current 8 mA typical
External Capacitors 4 × 1µF
Package 16-PDIP (N)
Operating Temperature 0°C to +70°C

Features

  • Industry standard RS-232 transceiver
  • 2 drivers + 2 receivers
  • Integrated charge pump (5V to ±10V)
  • Single 5V supply operation
  • 120 kbps data rate

Applications

  • RS-232 serial communication
  • Modem interfaces
  • Serial port adapters
  • Industrial RS-232 links
Product Introduction: MAX232N Product Introduction

The MAX232N from Texas Instruments is the industry-standard dual RS-232 driver/receiver operating from a single 5V supply. The integrated charge pump generates ±10V RS-232 levels, requiring only four external 1µF capacitors. The 16-pin DIP (PDIP) package provides 2 drivers and 2 receivers for full-duplex communication at up to 120 kbps.

Working Principle: MAX232N Working Principle

The MAX232 uses an internal charge pump (voltage doubler and inverter) to generate ±10V supplies from the 5V VCC. The drivers convert TTL/CMOS logic levels to RS-232 voltage swings (±5V to ±10V). The receivers convert RS-232 levels back to TTL/CMOS. The charge pump requires four external 1µF capacitors.

Pin Description: MAX232N Pin Definition and Functions
Pin Name Function
1-4 C1+/V+/C1-/C2+ Charge pump caps
5-6 C2-/V- Charge pump caps
7,14 T2OUT/T1OUT RS-232 driver outputs
8,13 R2IN/R1IN RS-232 receiver inputs
9,12 R2OUT/R1OUT TTL receiver outputs
10,11 T2IN/T1IN TTL driver inputs
15-16 GND/VCC Power
Application Scenarios: In which products and applications is MAX232N used
  • PC serial port interfaces
  • Modem communication links
  • Industrial RS-232 networks
  • Legacy serial communication adapters
Alternative Models: What chips are recommended as replacements for MAX232N
Manufacturer Part Number Notes
TI MAX3232CDR 3.3V version, SOIC
TI MAX232ACPE Enhanced speed version
ADI ADM232LARNZ Low-power alternative

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1