Opens in a new tab

MAX3221EIPWR

Single-channel RS-232 transceiver, 3-5.5V, 250kbps, ±15kV ESD, auto-powerdown 1µA, TSSOP-16

8700

Effective Inventory

Image for reference only

Manufacturer Part:

MAX3221EIPWR

Package:

TSSOP-16

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MAX3221EIPWR from Texas Instruments (formerly Maxim) is a 3.3V single-channel RS-232 transceiver with ±15kV ESD protection, 1 driver and 1 receiver, operating at data rates up to 250 kbps. It requires only four 0.1µF external capacitors and features auto-powerdown plus mode for ultra-low 1µA standby current in a 16-pin TSSOP package.

Key Specifications

  • Drivers/Receivers: 1/1
  • Supply Voltage: 3.0V ~ 5.5V
  • Data Rate: 250 kbps (250 kbaud)
  • ESD Protection: ±15kV IEC 1000-4-2 (air gap), ±8kV (contact)
  • Supply Current: 1 mA typical (active), 1 µA (auto-powerdown)
  • Slew Rate: Limited for 250 kbps operation
  • Capacitors Required: 4 × 0.1µF
  • Driver Output Voltage: ±5.4V minimum (3.3V supply)
  • Receiver Input Threshold: 0.8V/2.4V (TTL compatible)
  • Auto-Powerdown Plus: 1 µA standby when no signal detected
  • Operating Temperature: -40°C ~ 85°C
  • Package: TSSOP-16

Features

  • Single-channel RS-232 transceiver for minimal I/O applications
  • ±15kV ESD protection on RS-232 pins
  • Auto-powerdown plus reduces current to 1 µA
  • 3V to 5.5V operation with only 0.1µF charge pump capacitors
  • Meets EIA/TIA-232 and V.28 specifications
  • Pin-compatible with MAX3221

Applications

  • Battery-powered RS-232 communication
  • Handheld device serial ports
  • Point-of-sale terminals
  • Industrial serial interfaces
  • Debug and programming ports
Product Introduction: MAX3221EIPWR Product Introduction

The MAX3221EIPWR from Texas Instruments is a single-channel RS-232 transceiver optimized for battery-powered and space-constrained applications. The 1-driver/1-receiver configuration provides the minimum RS-232 interface needed for simple serial communication such as debug ports, programming interfaces, and single-device connections. The auto-powerdown plus feature automatically enters a 1 µA standby mode when no valid RS-232 signal is present on the receiver input, dramatically extending battery life in portable devices. The ±15kV ESD protection on the RS-232 pins eliminates the need for external TVS diodes in most applications. The charge pump requires only four 0.1µF capacitors, reducing board space and cost compared to designs requiring larger capacitor values. The IPWR suffix indicates TSSOP-16 tape and reel packaging.

Working Principle: MAX3221EIPWR Working Principle

The MAX3221EIPWR uses a dual charge pump to generate the ±5.4V to ±10V voltage levels required by the RS-232 standard from a single 3.0V to 5.5V supply. The first charge pump doubles the supply voltage, and the second inverts it, producing the positive and negative supplies for the driver output stage. The slew-rate-limited driver outputs comply with the EIA/TIA-232 specification at data rates up to 250 kbps while minimizing EMI. The auto-powerdown plus circuit monitors the receiver input for valid RS-232 signal levels. If no signal is detected for approximately 30 seconds, the device enters powerdown mode, reducing supply current to 1 µA. A valid RS-232 signal on the receiver or driving the FORCEON pin high wakes the device within 100 µs. The FORCEOFF pin provides manual shutdown control.

Pin Description: MAX3221EIPWR Pin Definition and Functions
Pin Name Function
1 C1+ Charge pump capacitor 1 positive
2 V+ Positive charge pump output (+5.4V to +10V)
3 C1- Charge pump capacitor 1 negative
4 C2+ Charge pump capacitor 2 positive
5 C2- Charge pump capacitor 2 negative
6 V- Negative charge pump output (-5.4V to -10V)
7 TOUT RS-232 driver output
8 RIN RS-232 receiver input
9 ROUT TTL/CMOS receiver output
10 INVALID Valid RS-232 indicator (active-low)
11 TIN TTL/CMOS driver input
12 FORCEON Force power-on (active-high)
13 FORCEOFF Force power-off (active-low)
14-16 GND, VCC Power and ground
Application Scenarios: In which products and applications is MAX3221EIPWR used

The MAX3221EIPWR is ideal for battery-powered handheld devices that need occasional RS-232 communication, such as GPS receivers, barcode scanners, and medical instruments. The auto-powerdown feature ensures minimal battery drain during the long idle periods between serial communication sessions. For embedded system debug ports, the single-channel configuration provides just the TX/RX lines needed for console access. In point-of-sale terminals, the ±15kV ESD protection handles cable discharge events without external protection. The TSSOP-16 package fits easily into space-constrained portable designs.

Alternative Models: What chips are recommended as replacements for MAX3221EIPWR
Model Manufacturer Key Difference
MAX3232EIPWR Texas Instruments Dual-channel (2/2), same features
SP3221EBCY-L MaxLinear Pin-compatible, single-channel
ST3232EBPR STMicroelectronics Dual-channel, 3-5.5V, TSSOP-16

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1