Opens in a new tab

MAX4477ASA+

Dual ultra-low-noise op-amp, 4.5nV/sqrtHz, 10MHz GBW, rail-to-rail output, 0.0002% THD+N in SOIC-8

14590

Effective Inventory

Image for reference only

Manufacturer Part:

MAX4477ASA+

Package:

SOIC-8 (4.90 x 3.90 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The MAX4477ASA+ from Analog Devices (Maxim Integrated) is a dual-channel, ultra-low-noise, low-distortion operational amplifier in an SOIC-8 package. It delivers 4.5nV/sqrtHz input voltage noise, 10MHz gain-bandwidth product, and rail-to-rail output with 0.0002% THD+N at 1kHz, making it ideal for audio and precision instrumentation applications.

Key Specifications

Configuration Dual Channel
Gain-Bandwidth Product (GBW) 10MHz
Slew Rate 3V/us
Input Voltage Noise 4.5nV/sqrtHz @ 1kHz
Input Offset Voltage +/-70uV (Max)
Input Bias Current +/-200pA (Max)
Supply Voltage 2.7V ~ 5.5V (Single Supply)
Quiescent Current 2.2mA (Typical, dual)
Output Type Rail-to-Rail Output
THD+N 0.0002% @ 1kHz
Package SOIC-8 (4.90 x 3.90mm)
Operating Temperature -40°C ~ +85°C

Features

  • Ultra-low input voltage noise of 4.5nV/sqrtHz for sensitive signal acquisition
  • Extremely low distortion of 0.0002% THD+N for high-fidelity audio
  • Rail-to-rail output swing maximizes dynamic range
  • Low input offset voltage (+/-70uV max) for precision applications
  • Low input bias current (+/-200pA max) for high-impedance sources
  • Lead-free SOIC-8 package

Applications

  • Professional and consumer audio preamplifiers
  • Medical instrumentation front-ends
  • Precision measurement and test equipment
  • High-resolution ADC driver buffers
  • Low-noise transducer amplifiers
Product Introduction: MAX4477ASA+ Product Introduction

The MAX4477ASA+ from Analog Devices is a dual-channel, ultra-low-noise, low-distortion operational amplifier optimized for audio and precision signal conditioning applications. With an input voltage noise density of only 4.5nV/sqrtHz at 1kHz and total harmonic distortion plus noise (THD+N) of just 0.0002%, this device sets a benchmark for audio-quality amplification. The 10MHz gain-bandwidth product and 3V/us slew rate provide ample bandwidth for audio and low-frequency instrumentation. Rail-to-rail output capability maximizes dynamic range in single-supply applications. The low input offset voltage of +/-70uV maximum and low input bias current of +/-200pA maximum ensure precision in DC-coupled circuits.

Working Principle: MAX4477ASA+ Working Principle

The MAX4477 employs a complementary bipolar input stage with laser-trimmed resistors to achieve ultra-low noise and distortion. The input stage uses large-geometry transistors operating at optimal bias currents to minimize 1/f noise while maintaining low input bias current. The rail-to-rail output stage uses a common-emitter configuration that allows the output to swing to within millivolts of both supply rails. Internal frequency compensation ensures stability in unity-gain configurations. The dual-channel architecture provides matched amplifier characteristics for differential signal processing.

Pin Description: MAX4477ASA+ Pin Definition and Functions
Pin Name Function
1 OUT_A Channel A output
2 IN-_A Channel A inverting input
3 IN+_A Channel A non-inverting input
4 VSS Negative supply / Ground
5 IN+_B Channel B non-inverting input
6 IN-_B Channel B inverting input
7 OUT_B Channel B output
8 VDD Positive supply (2.7V-5.5V)
Application Scenarios: In which products and applications is MAX4477ASA+ used
  • Professional Audio Preamplifier: 4.5nV/sqrtHz noise floor and 0.0002% THD+N preserve audio fidelity in microphone preamp stages
  • Medical ECG/EKG Front-End: Ultra-low noise amplifies microvolt-level biopotential signals with low bias current
  • 24-bit ADC Driver: Rail-to-rail output maximizes ADC dynamic range; 10MHz GBW supports oversampled converters
  • Precision Weigh Scale: +/-70uV max offset and low noise enable sub-milligram resolution in bridge transducer applications
Alternative Models: What chips are recommended as replacements for MAX4477ASA+
Model Manufacturer Key Difference
OPA1652 TI Dual, 4.5nV/sqrtHz, 18MHz GBW, FET input
LME49720 TI Dual, 2.7nV/sqrtHz, 55MHz GBW
AD8656 ADI Dual, 2.7nV/sqrtHz, 28MHz GBW
MAX4475 ADI Single channel version of MAX4477
NE5532 TI Dual, 5nV/sqrtHz, 10MHz, industry standard

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1