Opens in a new tab

MAX4634EUB+

Quad SPDT Analog Switch, 0.8Ohm RON, 2-5.5V, MSOP-10

3456

Effective Inventory

Image for reference only

Manufacturer Part:

MAX4634EUB+

Package:

uMAX-10 / MSOP-10 (3.0 x 3.0 x 1.0 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The MAX4634EUB+ from Analog Devices (Maxim Integrated) is a quad SPDT (4-channel single-pole/double-throw) analog switch with 0.8 Ohm on-resistance in a uMAX-10 (MSOP-10) package.

Key Specifications

Type Quad SPDT Analog Switch
Configuration 4 x SPDT (4 independent switches)
On-Resistance (RON) 0.8 Ohm (max) @ 5V
RON Flatness 0.15 Ohm (max)
Supply Voltage 2.0 V to 5.5 V (single) or +/-2.0V to +/-5.5V
Analog Signal Range V- to V+
Switching Time 60 ns (typical)
Charge Injection 30 pC (typical)
Off-Leakage 0.5 nA (typical)
Package uMAX-10 (MSOP-10)
Operating Temperature -40C to +85C

Features

  • Ultra-low 0.8 Ohm on-resistance
  • 4 independent SPDT switches
  • Rail-to-rail analog signal handling
  • Fast 60 ns switching time
  • Low 30 pC charge injection
  • Break-before-make switching
  • 2V to 5.5V single supply

Applications

  • Audio and video signal routing
  • Battery-powered signal switching
  • Data acquisition multiplexing
  • Programmable gain amplifier gain selection
Product Introduction: MAX4634EUB+ Product Introduction

The MAX4634EUB+ from Analog Devices (Maxim Integrated) is a quad SPDT (4-channel single-pole/double-throw) analog switch with ultra-low 0.8 Ohm maximum on-resistance. The four independent SPDT switches can route up to 4 analog signals between two destinations each, making the device ideal for signal routing, multiplexing, and gain selection in data acquisition systems. The rail-to-rail analog signal handling allows switching signals from V- to V+. The 60 ns switching speed supports high-speed signal routing. The break-before-make architecture prevents momentary short-circuits during switching. The low 30 pC charge injection minimizes glitch energy when switching, important for precision data acquisition. The uMAX-10 (MSOP-10) package provides a compact footprint.

Working Principle: MAX4634EUB+ Working Principle

The MAX4634EUB+ uses enhancement-mode N-channel and P-channel MOSFETs connected in parallel (N+P T-switch) for each switch element. The parallel N+P configuration provides the low 0.8 Ohm on-resistance across the full rail-to-rail signal range: when the analog signal is near V+, the P-channel FET has the lowest RON; when near V-, the N-channel FET dominates. The gate drive for each FET is derived from the supply rails with level shifters to ensure full enhancement over the entire signal range. The SPDT configuration consists of two T-switches per channel, one connected to the normally-closed (NC) terminal and one to the normally-open (NO) terminal. The break-before-make circuit ensures that the NC switch opens before the NO switch closes, preventing signal short-circuiting. The 30 pC charge injection is the net charge transferred from the control input to the analog output during switching, which appears as a voltage glitch on the signal.

Pin Description: MAX4634EUB+ Pin Definition and Functions
Pin Name Type Function
1 NO1 Analog Channel 1 normally-open terminal
2 COM1 Analog Channel 1 common terminal
3 NC1 Analog Channel 1 normally-closed terminal
4 IN1 Digital Channel 1 control input
5 GND Ground Ground
6 IN2 Digital Channel 2 control input
7 NC2 Analog Channel 2 normally-closed terminal
8 COM2 Analog Channel 2 common terminal
9 NO2 Analog Channel 2 normally-open terminal
10 V+ Power Positive supply (2-5.5V)
Application Scenarios: In which products and applications is MAX4634EUB+ used
  • Audio signal routing with 0.8 Ohm low-distortion SPDT switching
  • Programmable gain amplifier with 4 gain settings using 2 SPDT switches
  • Data acquisition 4-channel input multiplexer with low charge injection
  • Battery-powered sensor channel selection with rail-to-rail signal handling
Alternative Models: What chips are recommended as replacements for MAX4634EUB+
Manufacturer Part Number Package Notes
ADI ADG734BRUZ TSSOP-20 Quad SPDT, 2.5 Ohm, similar
TI TS5A3159DCKR SC-70-6 Single SPDT, 1 Ohm, smaller
Nexperia 74HC4053D,653 SOIC-16 Triple SPDT, higher RON (80 Ohm)
ADI MAX4634EUD+ SOT-23-10 Same device, smaller package
ADI MAX4636EUB+ MSOP-10 Dual SPDT, same family

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1