Opens in a new tab

MAX815TESA+T

High-accuracy uP supervisor with ±1% threshold, 3.03V reset, watchdog timer, power-fail comparator in 8-SOIC

5320

Effective Inventory

Image for reference only

Manufacturer Part:

MAX815TESA+T

Package:

8-SOIC (3.90mm width)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The MAX815TESA+T is a high-accuracy microprocessor supervisory circuit from Analog Devices (formerly Maxim Integrated). It provides power-on reset, watchdog timer, and power-fail comparator functions in a compact 8-SOIC package. The T-suffix version features a 3.03V reset threshold, making it suitable for 3.3V systems. With ±1% threshold accuracy and only 75µA max supply current, it ensures reliable system initialization and monitoring in critical applications.

Key Specifications

Type Simple Reset/Power-On Reset
Reset Threshold 3.03V (T suffix)
Threshold Accuracy ±1%
Reset Timeout 140ms minimum
Supply Current 75µA max
Output Type Push-Pull, Totem Pole (Active Low)
Watchdog Timeout 1.56s
Power-Fail Comparator 1.70V threshold
Manual Reset Yes
Package 8-SOIC (3.9mm width)
Operating Temperature -40°C to +85°C

Features

  • ±1% reset threshold accuracy for reliable system monitoring
  • Guaranteed RESET valid down to VCC = 1V
  • Independent watchdog timer with 1.56s timeout
  • Power-fail comparator with 1.70V threshold
  • Manual reset input
  • Push-pull totem pole RESET output (active low)
  • Low supply current: 75µA max
  • Power-supply glitch immunity
  • 200ms reset time delay

Applications

  • Microprocessor and DSP system supervision
  • 3.3V and 5V logic power monitoring
  • Battery-powered equipment supervision
  • Critical system power-fail detection
  • Embedded controllers and industrial automation
  • Automotive ECUs requiring high-accuracy reset
Product Introduction: MAX815TESA+T Product Introduction

The MAX815TESA+T is a precision microprocessor supervisory circuit from Analog Devices/Maxim Integrated, part of the MAX814/MAX815/MAX816 family. It provides three critical monitoring functions in a single 8-SOIC package: power-on reset with ±1% threshold accuracy, an independent watchdog timer with 1.56-second timeout, and a power-fail comparator with a 1.70V threshold. The T-suffix indicates a 3.03V reset threshold, optimized for 3.3V systems with tight voltage tolerances. The push-pull totem pole RESET output is guaranteed valid down to VCC = 1V, ensuring reliable processor initialization even during slow supply ramps or brownout conditions. A manual reset input allows external triggering of the reset function.

Working Principle: MAX815TESA+T Working Principle

The MAX815 continuously monitors the VCC supply voltage against its precision internal reference. When VCC falls below the 3.03V reset threshold, the RESET output asserts low within nanoseconds. Once VCC rises above the threshold, a 140ms minimum reset timeout holds RESET low to allow the power supply and processor to stabilize. The watchdog timer monitors activity on the WDI pin; if no transition occurs within 1.56 seconds, the WDO output asserts low, indicating a software hang. The power-fail comparator has an independent 1.70V threshold on the PFI pin, providing early warning of impending power failure via the PFO output before the main reset threshold is reached.

Pin Description: MAX815TESA+T Pin Definition and Functions
Pin Name Description
1 GND Ground
2 PFI Power-fail input (threshold = 1.70V)
3 PFO Power-fail output (low when PFI below threshold)
4 WDI Watchdog input (transition resets timer)
5 WDO Watchdog output (low on timeout or VCC below threshold)
6 RESET Active-low reset output (push-pull totem pole)
7 MR Manual reset input (active low)
8 VCC Power supply (1.2V to 5.5V)
Application Scenarios: In which products and applications is MAX815TESA+T used
  • 3.3V Microcontroller Supervision: The 3.03V threshold provides early reset warning for 3.3V systems with ±5% tolerance, ensuring the MCU is held in reset before VCC drops below 3.15V (3.3V minus 5%). Connect RESET to the MCU active-low reset pin. Add a 100kΩ pulldown on RESET for valid output below 1V.
  • Power-Fail Early Warning: Use the PFI/PFO comparator to monitor an upstream supply rail (e.g., 12V via resistor divider) before it reaches the 3.3V regulator. PFO can trigger an interrupt on the MCU, allowing graceful shutdown and data saving before the main reset occurs.
  • Watchdog for Software Reliability: Connect WDI to a GPIO pin toggled by the firmware’s main loop. If the software hangs, the 1.56s watchdog timeout asserts WDO, which can be connected to MR to force a system reset, recovering from crashes automatically.
Alternative Models: What chips are recommended as replacements for MAX815TESA+T
Model Threshold Watchdog PFI Key Difference
MAX814TEPA+T 3.03V No Yes RESET + RESET outputs, no watchdog
MAX816TEPA+T Adj. No Yes Adjustable reset threshold
TMPM369Y2AW 3.08V Yes No Similar supervisor with different threshold
TPS3823-33DBVR 2.93V Yes No Open-drain reset, TI alternative
MCP131T-300E/TT 3.00V Yes No Push-pull, Microchip alternative

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1