Opens in a new tab

MBR140SFT1G

40V/1A Schottky rectifier, 0.5V VF, SMA package, fast switching

8509

Effective Inventory

Image for reference only

Manufacturer Part:

MBR140SFT1G

Package:

SMA (DO-214AC, 5.2 x 2.6 x 2.2 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The MBR140SFT1G from onsemi is a 40V 1A Schottky rectifier diode in a SMA (DO-214AC) surface-mount package, featuring low 0.5V forward voltage drop and fast switching for power supply applications.

Key Specifications

Type Schottky Barrier Rectifier
Reverse Voltage (VRRM) 40V
Forward Current (IF) 1A (average rectified)
Forward Voltage (VF) 0.5V (typ @ 1A)
Reverse Current (IR) 0.5 mA (max @ 40V, 25C)
Surge Current (IFSM) 30A (8.3ms half-sine)
Junction Capacitance 110 pF (typ @ 1MHz, 0V)
Operating Temperature -65 to +150 C (TJ)
Package SMA (DO-214AC)
MSL MSL 1 (Unlimited)

Features

  • Low 0.5V forward voltage for high efficiency
  • 40V reverse voltage rating
  • 1A continuous forward current
  • Fast switching (no reverse recovery – majority carrier device)
  • Guard ring for ruggedness and ESD protection
  • SMA surface-mount package

Applications

  • DC-DC converter output rectification
  • Reverse polarity protection
  • Power supply free-wheeling diode
  • Battery charging circuits
Product Introduction: MBR140SFT1G Product Introduction

The MBR140SFT1G from onsemi is a 40V 1A Schottky barrier rectifier diode in a compact SMA (DO-214AC) surface-mount package. As a Schottky diode, it uses a metal-semiconductor junction rather than a P-N junction, resulting in a significantly lower forward voltage drop (0.5V typical at 1A) compared to silicon P-N diodes (typically 0.7-1.0V). This lower forward voltage directly translates to reduced conduction losses in power supply applications, improving overall converter efficiency. Schottky diodes are majority-carrier devices, meaning they have essentially zero reverse recovery time (no stored minority charge to remove), making them ideal for high-frequency switching applications such as buck converter free-wheeling diodes, boost converter output diodes, and reverse polarity protection circuits. The 40V reverse voltage rating provides adequate margin for 12V and 24V power supply output stages. The guard ring structure around the Schottky junction provides ruggedness against voltage transients and enhanced ESD protection. The MBR140SFT1G is AEC-Q101 qualified, suitable for automotive applications. The SMA package provides a good balance between current handling capability (1A) and board space (5.2 x 2.6mm footprint). The T1G suffix indicates onsemi’s lead-free, RoHS-compliant termination finish with MSL 1 (unlimited floor life).

Working Principle: MBR140SFT1G Working Principle

The MBR140SFT1G operates as a Schottky barrier rectifier using a metal-semiconductor junction. Key operating principles include: (1) Schottky Junction – a rectifying junction is formed between a metal (typically a refractory metal such as molybdenum or tungsten silicide) and lightly-doped N-type silicon; unlike a P-N junction where both holes and electrons participate, the Schottky junction is a majority-carrier device where only electrons flow from the semiconductor to the metal under forward bias; (2) Low Forward Voltage – the metal-semiconductor junction has a lower barrier height (approximately 0.4-0.5V for typical power Schottky diodes) compared to a P-N junction barrier (0.6-0.7V); this results in a lower forward voltage drop at a given current density, directly reducing conduction power loss (P = VF x IF); (3) Zero Reverse Recovery – since the Schottky junction is a majority-carrier device, there is no stored minority charge to remove during the reverse recovery transition; the diode turns off almost instantly when the voltage reverses, limited only by junction capacitance charging; this eliminates the reverse recovery loss (PRR = QRR x VR x f) that plagues P-N diodes in high-frequency switching applications; (4) Guard Ring – a P-type guard ring surrounds the Schottky contact, providing a P-N junction that acts as a voltage clamp during transient overvoltage events, protecting the Schottky junction from damage; (5) Reverse Leakage – the tradeoff for low VF is higher reverse leakage current compared to P-N diodes; at 25C and rated reverse voltage, leakage is typically 0.5mA maximum, increasing exponentially with temperature (approximately doubling every 10C).

Pin Description: MBR140SFT1G Pin Definition and Functions
Pin Name Function
1 Anode Positive terminal (connect to higher voltage side)
2 Cathode Negative terminal (marked with band on package)
Application Scenarios: In which products and applications is MBR140SFT1G used
  • DC-DC buck free-wheeling: replaces P-N diode in buck converter output, reducing conduction loss by 30-50%
  • Reverse polarity protection: series diode at power input; 0.5V VF reduces voltage loss vs 0.7V P-N diode
  • Solar panel blocking: prevents battery discharge through solar panel at night with low voltage drop
  • Battery OR-ing: two batteries diode-ORed to load with minimum voltage drop
Alternative Models: What chips are recommended as replacements for MBR140SFT1G
Manufacturer Part Number Package Notes
onsemi MBR140SFG SMA Non-AEC-Q101 version
ST STPS1L40A SMA ST equivalent, 1A/40V Schottky
onsemi MBR130SFT1G SMA 30V version for lower voltage rails
onsemi MBR360T3G SMB 60V/3A higher power Schottky
Vishay SS14-E3/61T SMA Vishay 40V/1A Schottky

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1