Opens in a new tab

MC74VHC1G32DFT2G

Single 2-Input OR Gate, TTL In, 2-5.5V, SC-70-5

15000

Effective Inventory

Image for reference only

Manufacturer Part:

MC74VHC1G32DFT2G

Package:

SC-88A / SC-70-5 (2.0 x 1.25 x 1.0 mm, 0.65mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MC74VHC1G32DFT2G from onsemi is a single 2-input OR gate with TTL-compatible inputs, 2-5.5V VCC, 3.5ns propagation delay, and SC-88A (SC-70-5) package.

Key Specifications

Type Single 2-Input OR Gate (TTL-Compatible Inputs)
Logic Function OR (Y = A + B)
Supply Voltage 2.0V to 5.5V
Propagation Delay 3.5 ns (typ) at VCC=5V; 7.5 ns (max) at VCC=4.5-5.5V
Input Threshold TTL: VIH=2.0V, VIL=0.8V (T32 variant)
Output Drive +/-8 mA at 3.0V VCC
Quiescent Current 1 uA (max) at 25C
Input Overvoltage Tolerant to 5.5V (regardless of VCC)
Package SC-88A / SC-70-5 (DFT2 suffix)
Operating Temperature -55C to +125C

Features

  • TTL-compatible input thresholds (MC74VHC1GT32)
  • 2.0V to 5.5V VCC operation
  • 3.5ns typical propagation delay at 5V
  • Input overvoltage tolerant to 5.5V
  • IOFF partial power-down protection
  • +/-8mA output drive at 3V
  • Pb-free, halogen-free, RoHS compliant

Applications

  • Logic-level translation (3V to 5V)
  • General-purpose logic glue
  • Signal combining and OR-ing
  • Buffer/interface logic
Product Introduction: MC74VHC1G32DFT2G Product Introduction

The MC74VHC1G32DFT2G from onsemi is a single 2-input OR gate in a tiny SC-88A (SC-70-5) surface-mount package. The DFT2 suffix denotes the SC-88A package with tape and reel packaging, and G indicates the Pb-free version. The MC74VHC1G32 variant has CMOS-level input thresholds, while the MC74VHC1GT32 variant (indicated by the T in the full part number MC74VHC1GT32DFT2G) has TTL-compatible input thresholds (VIH=2.0V, VIL=0.8V). The TTL input thresholds allow the gate to interface directly with 5V TTL logic outputs even when operating at a lower VCC (e.g., 3.3V), because a 5V TTL output high level (2.4V minimum) exceeds the 2.0V VIH threshold. The input overvoltage tolerance to 5.5V regardless of VCC allows the gate to be used as a logic-level translator from 5V CMOS to 3.3V CMOS: the inputs can be driven by 5V signals while VCC is 3.3V, and the outputs will swing to 3.3V CMOS levels. The IOFF circuit ensures that when VCC is 0V, the inputs and outputs are disabled and do not load the bus, preventing back-feeding in power-down scenarios. The 1uA maximum quiescent current at 25C minimizes standby power consumption.

Working Principle: MC74VHC1G32DFT2G Working Principle

The MC74VHC1G32DFT2G implements the OR logic function Y = A + B using CMOS transistor-level logic. The OR function is built from NAND and NOR gates with inverters using the DeMorgan equivalent implementation: Y = A + B = (A’ * B’)’ . The three-stage internal circuit provides buffering for high noise immunity and stable output characteristics. The TTL-compatible input threshold variant (T32) uses a modified input stage that sets the switching threshold at TTL levels (VIH=2.0V, VIL=0.8V) rather than CMOS levels (VIH=0.7xVCC, VIL=0.3xVCC). This allows the gate to recognize 5V TTL logic levels even when operating at 3.3V VCC. The output stage uses a balanced CMOS push-pull driver (P-channel pull-up, N-channel pull-down) providing symmetrical output impedance and rail-to-rail output swing. The input protection circuit uses diodes to VCC and GND that clamp input voltages beyond the supply rails, and the overvoltage-tolerant input structure allows the protection diodes to block (not conduct) when the input voltage exceeds VCC up to 5.5V, achieved by isolating the VCC-referenced clamp diode from the input.

Pin Description: MC74VHC1G32DFT2G Pin Definition and Functions
Pin Name Type Function
1 A Input OR gate input A
2 B Input OR gate input B
3 GND Power Ground
4 Y Output OR gate output (Y = A + B)
5 VCC Power Supply voltage (2.0-5.5V)
Application Scenarios: In which products and applications is MC74VHC1G32DFT2G used
  • 3.3V to 5V logic level translation: 3.3V MCU GPIO OR-ed with 5V peripheral interrupt using TTL input thresholds and 5.5V input overvoltage tolerance
  • Power-good OR-ing: two power supply PGOOD signals (active-low) combined through OR gate with pull-up to create a combined power-good indicator
  • General-purpose glue logic in space-constrained design where a single OR function is needed in a 2×1.25mm SC-70-5 footprint
Alternative Models: What chips are recommended as replacements for MC74VHC1G32DFT2G
Manufacturer Part Number Package Notes
onsemi MC74VHC1G32DFT1G SC-88A CMOS-level inputs (non-T)
TI SN74LVC1G32DCKR SC-70-5 Direct equivalent, TI brand
NXP 74LVC1G32GW SOT-353 Equivalent, different brand
Toshiba TC7SG32FU USV-5 Equivalent, Toshiba brand
onsemi NL27WZ32DFT2G SC-88A Dual OR gate, same footprint

Recommend Parts

MSP432P401RIPZR

Ultra-low-power Cortex-M4F MCU, 48MHz, 256KB Flash, 14-bit ADC, 850nA standby, 100-LQFP

Brand: TI

Package: 100-LQFP (14 x 14 x 1.4mm)

IN STOCK: 3750pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PTN78060WAH

4.5A positive-input buck-IT module, adjustable, SMD module

Brand: TI

Package: Module (34.3 x 19.3 x 8.2 mm)

IN STOCK: 4786pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC16F1526-I/PT

8-bit PIC16 MCU, 14KB Flash, 768B RAM, 30-ch 10-bit ADC, 10x CCP, 64-TQFP, XLP

Brand: MICROCHIP

Package: TQFP-64 (10.0 x 10.0 x 1.05 mm)

IN STOCK: 5600pcs

Cargo cycle: 3-7 Days

The minimum order is 1

R2A20178NP

8-channel 8-bit voltage output DAC, R-2R architecture, buffered rail-to-rail output, SPI interface up to 25MHz, 2.7-5.5V

Brand: Renesas

Package: 24-pin HWQFN (4x4x0.75mm)

IN STOCK: 6399pcs

Cargo cycle: 3-7 Days

The minimum order is 1

VS-40CPQ100-N3

Dual Schottky rectifier, common cathode, 2x20A, 100V, 0.61V VF, TO-247AC-3L, Vishay Q-series, 175 degC TJ, guard ring

Brand: VISHAY

Package: TO-247AC 3L (3-lead through-hole, 15.5mm width, tab for heatsink, common cathode configuration)

IN STOCK: 8950pcs

Cargo cycle: 3-7 Days

The minimum order is 1

BSC040N10NS5

OptiMOS 5 N-ch 100V 4mΩ 136A MOSFET, SuperSO8

Brand: infineon

Package: PG-TDSON-8 (SuperSO8, 5 x 6mm)

IN STOCK: 10509pcs

Cargo cycle: 3-7 Days

The minimum order is 1